然后利用ICEM软件建立有限元模型。
Then this essay builds the finite element model with the ICEM software.
建立有限元模型。
针对聚合物密封件建立有限元模型，进行计算单元划分。
FEA model build and computational plate forming for polymer seals product.
该模块根据封头的尺寸参数，采用参数化方法建立有限元模型。
This code uses the dimensions of a pressure vessel head to create an FEM model by a parameterization method.
用ANSYS建立有限元模型，分析由温度场引起的光学镜面形变。
An finite element model is established by ANSYS, the deformation of optical mirrors caused by temperature field is analyzed.
在建立有限元模型中，广泛采用变截面梁和异型梁是本模型的一大特色。
Taper section and custom section beams are widely adopted in the process of model set-up, which is a feature of this paper.
建立有限元模型，分析了不同桩排距条件下前后两排抗滑桩的受力状况。
A finite element model was established and the mechanical characteristics of the front and back rows of piles at different row distances were discussed.
以双质量弹簧阻尼系统为例建立有限元模型，计算动力响应以及动态特性。
The finite element model, computation response of driving force and dynamic characteristic are established by taking double mass spring damping system for example.
建立有限元模型，计算配置两种材料道面的荷载应力与翘曲应力并进行比较。
By setting up finite element model, the load stress and the warping stress of the two materials pavement are calculated and compared.
针对功能梯度材料这种新型材料，提出了采用等参梯度元建立有限元模型的方法。
Functional graded material is a new material. Isoparametric graded finite elements are used for building the corresponding model for functional graded material in this paper.
针对功能梯度材料这种新型材料，提出了采用等参梯度元建立有限元模型的方法。
By comparing the numerical solutions with the analytical solutions, it is proved that the isoparametric graded finite elements are useful.
采用实测轮胎荷载建立有限元模型，分析了满足长寿命路面要求的沥青路面结构组合。
Finite Element model was developed with actual tyre loads to analyze asphalt pavement structural combinations meeting the standards of perpetual pavement.
为进一步研究其性质，介绍了它的现场载荷实验情况，描述了建立有限元模型的过程。
To study deeply the behaviours of the structure, this paper introduced the on site experiment of the structure, described finite element models.
采用实测轮胎荷载建立有限元模型，分析了满足长寿命路面要求的沥青路面结构组合。
A Finite Element model was developed with actual tyre loads to analyze asphalt pavement structural combinations meeting the standards of perpetual pavement.
在建立有限元模型时对于裂纹尖端的单元，采用节点—单元的方式生成二次奇异单元。
When FEA model was formed, the quadratic singular elements of the tip of the crack were formed by node to element.
因此，工程师往往在CAE分析工程中要花费大量的时间来建立有限元模型和修改模型。
Therefore, the engineer should spend a lot of time on setting up finite element model and revise models in CAE project of analysis.
方法考虑材料非线性，大变形和接触条件建立有限元模型，采用有限元法进行应力分析。
Method the Finite Element Method was employed to perform the stress analysis on this valve, which included the material nonlinearity, large deformation and the contact condition.
改变以往建立有限元模型时采用的二维建模方法，根据塔机实际结构建立三维空间桁架模型；
Instead of tow-dimensional finite element mode, three-dimensional mode in truss structure is established based on the actual structure.
建立有限元模型，对平板条叶片以不同角度和初始速度撞击矩形靶板的过程进行了数值模拟。
Numerical simulations of the course of the plate blade impacting target with the different angles and the initial velocity were performed based on the finite element model.
首次在锤击消除焊接应力的数值模拟研究中，采用接触单元技术建立有限元模型模拟计算锤击作用。
In the numerical simulation of relieving residual stress by hammer peening, contact element technique was firstly adopted for establishing the finite model and calculating the hammer peening.
该分析包含如下步骤：建立有限元模型应用ANSYS软件包仿真研究永磁式接触器的吸力特性；
This simulation includes the following steps: with the use of ANSYS software package, the attraction characteristic of contactor with permanent magnet is simulated, which is based on FEA model;
目的：通过建立有限元模型，探讨按扣式和键槽缓压式两种精密附着体修复下颌磨牙游离缺失的应力分布情况。
Objective:The purpose of this study was to analyze the force system of different precision attachment in mandible distal-extension edentulous by the finite-element model.
应用计算机辅助设计和有限元网格划分的技巧和方法建立有限元模型，有效解决车体结构复杂和尺寸庞大的问题。
With modern CAD method and smart skill of making mesh used, finite element (FE) model is established and the problem of complicated structure and large dimension is solved.
采用有限元分析软件ANSYS，基于弹塑性有限元理论建立有限元模型，对汽车板件冲压连接过程进行了模拟。
Based on the elastic-plastic FE theory, the Punching Bonding process of the automobile sheets is simulated by using ANSYS analysis software in this paper.
对南京奥体中心中央大平台梁柱固接即形成框架的情况建立有限元模型，分析其在温度及收缩作用下的内力分布情况。
The finite element model of Nanjing Olympic Center is created, and the distribution of internal force under temperature and shrinkage load is analyzed.
天线结构的有限元分析目前应用已较普及，但是如何正确地在结构设计后建立有限元模型，则是一个十分重要的问题。
Presently the finite element analysis has been widely used in antenna, but it is an important matter to build up correct finite element model after structure designed.
应用计算机辅助设计和有限元网格划分的技巧和方法建立有限元模型，有效地解决矿用汽车货箱结构和尺寸庞大的问题。
With modern CAD method and smart skill of making mesh used, finite element(FE) model is established and the problem of structure of heavy truck body and large dimension are solved.
应用计算机辅助设计和有限元网格划分的技巧和方法建立有限元模型，有效的解决矿用汽车货箱结构和尺寸庞大的问题。
The problem of a too large size of the mine truck's body structure was solved by a finite element model established by using CAS and FE grid division methods.
应用计算机辅助设计和有限元网格划分的技巧和方法建立有限元模型，有效的解决矿用汽车货箱结构和尺寸庞大的问题。
With modern CAD method and smart skill of making mesh used, finite element (FE) model is established and the problem of structure of heavy truck's body and large dimension is solved.
在建立有限元模型时要注意材料模型、网格划分、边界条件、切屑分离准则等方面，因为这些直接将影响模拟计算的精度。
Pay attention to the material model, meshing, boundary condition, and chip separation criterion of the model, which can affect calculation precision directly.
应用推荐