并对各种锻造工艺进行了综合比较。
The comparison between new process and traditional process was made in detail.
阐述了用粉末锻造工艺代替普通模锻的优点。
It has elaborated the advantages of the powder forging technology.
并依此对矿用连接环锻造工艺的改进提出看法。
The article puts forward some viewpoints about the forging process of mine link ring based on that.
预制坯设计是锻造工艺设计中的重要内容之一。
为此提出了全纤维锻造工艺，并进行了模具设计。
Thus the all fiber forging technics is presented and the die design is made.
依据NPM计划，及时完成锻造工艺卡片的编制工作。
所得结论对制定合理的锻造工艺规范具有一定的指导意义。
The conclusion is useful for reasonably working out quenching process of forging.
研究了新型TMC -2复合材料的叶片小余量锻造工艺。
Little allowance forging process of a new TMC -2 composite blade is studied.
该方法对优化难变形材料锻造工艺和控制锻件质量具有指导作用。
The proposed method can serve as the guide for optimizing the forging process and controlling the forging quality of difficult-to-deformation materials.
该研究对压气机静子叶片锻造工艺的优化设计具有重要的指导意义。
This study is of significance to the technological design in the compressor stator blade forging process.
推力锥产品存在深腔、薄壁结构，锻造工艺过程中壁厚差难以控制。
Thrust cone has deep cavity and thin wall. Wall margin is hard to control during the forging process.
介绍了小型轴承套的胎模锻造工艺，并详述了组合套模的设计要点。
The die forging process for the small type bearing bushings has been described in this article, as well as the design outline of the assembled sleeve die.
本文的研究为全面提高转子锻造工艺设计水平和锻件质量具有指导意义。
The research is significant to guide how to improve the forging process design of rotors and forging quality generally.
在分析高速钢特性的基础上，介绍了高速钢的锻造工艺及其锻后热处理。
Upon characteristics analysis of high speed steel, forging technology of high speed steel and sequential heat treatment have been introduced.
锻造工艺试验与数值模拟结果吻合较好，从而验证了数值模拟结果的可靠性。
A good agreement between simulation results and industrial trials shows that the results of the numerical simulation are reliable.
锻造工艺不当也会出现晶粒大或不均，硬化裂纹现象，锻造成本高于铸造法兰。
Improper forging process will also appear large grain or uneven, hardening crack phenomenon, forging cost is higher than the casting flange.
下方的优化锻造工艺布局该达到的精度还取决于对精度的模具生产和过程控制。
Beneath the optimization of the forging process layout the attainable precision also depends on the accuracy of toolmaking and process control.
介绍了连杆精密锻造工艺，自动化精密锻造生产线的组成、功能、特点及应用。
This paper presents the precision forging technology of connecting rods, together with the composition, functions, properties and application of the automatic production line.
叙述了白口铸铁锻造工艺特点，以及锻造比对白口铸铁组织和力学性能的影响。
The paper describes the forging properties of white cast iron and the effect of forging ratio on the structure and properties of white cast iron.
详细介绍了锻造工艺计算机辅助设计CAPP系统的功能、程序特点及使用情况。
The function, program feature and application condition of computer auxiliary design CAPP system for forging process have been described in details.
从本文实例中可以看出，有限元分析方法对提高锻造工艺设计水平具有显著作用。
It has been shown that finite element simulation can improve the forging process design level greatly.
因此，对微观组织模型应用，锻造工艺中晶粒度的控制等方面的研究有重要意义。
Therefore it is important to study the application of microstructure models and the control of grain size in the forging process.
分析圆锥滚子轴承内圈锻件结构，对原锻造工艺中的不足提出了相应的工艺改进措施。
With analysis of structure of cone roller bearing inner ring forgings, corresponding improvement on original forging technology has been put forward.
分析了变形方式和变形程度对大型锥环形锻件组织和性能的影响并制定较佳锻造工艺。
The effect of deformation mode and degree on the structure and properties of large conical ring forgings was analyzed. An optimal forging process was drawn up.
本文论述了该锻件的成型工艺方法，包括设备选择、模具设计、锻造工艺、热处理等。
This article describes the forging's forming technological method which include the equipment choosing, die designing, forging process and heat- treatment, etc.
研究了两类锻造工艺对航天用TC 4钛合金异形锻件的显微组织及拉伸性能的影响。
The influence of two abnormal forging processes on the microstructures and tensile properties of TC4 alloy is investigated.
通过多次工艺试验，对国产新材料超高强度钢tm 210a的锻造工艺进行了深入的研究。
The forging process for the super high strength steel TM210A has been further researched with several process tests, and more perfect forging parameter has been obtained as well.
本文主要介绍了粉末锻造工艺的方法，应用目的及现状，工艺流程及要求，应用实例及优点。
This article introduces the technique of powder forging as well as its application, current status, technical process and requirements, application examples and advantages.
结果表明：烧结体的镦粗变形规律与致密体相同。指出了曲柄压力机是粉末锻造工艺的最佳设备。
The results show that the upsetting deformation law of sintered preform is alike with the compact body, and the crank press is the best equipment of powder forging technology.
结果表明：烧结体的镦粗变形规律与致密体相同。指出了曲柄压力机是粉末锻造工艺的最佳设备。
The results show that the upsetting deformation law of sintered preform is alike with the compact body, and the crank press is the best equipment of powder forging technology.
应用推荐