This is the most expensive part of anodizing.
这是最昂贵的部分阳极氧化。
The following procedure is for anodizing aluminum parts.
下面是介绍零部件的铝阳极氧化的流程。
About the only time I use this anymore is to remove anodizing.
关于我唯一一次使用此不再是消除阳极氧化。
The obvious benefit of anodizing is you can add color to aluminum.
在阳极氧化明显的好处是你可以添加颜色铝。
Anodizing technology for aluminium magnetic films were investigated.
对阳极氧化技术制备铝磁性膜进行了实验研究。
There are a lot of alloys and many of them respond to anodizing differently.
还有大量的合金，其中许多不同的阳极氧化反应。
Anodizing apparatus, anodizing system, substrate processing apparatus and method.
阳极化设备，阳极化系统，及基体处理设备和方法。
Hard anodizing power supply is an important part of the equipment to deal with metal surface.
硬质阳极化电源是对金属表面进行处理的装置。
XV(Blue):A fast cutting media that leaves excellent finishes ready for anodizing or painting.
（兰色）：较快切削的磨块，留下理想的表面做极化处理或油漆。
Its comprehensive coverage focuses on anodizing for surface protection and decorative effects.
它的广泛报导集中在表面保护和装饰作用的阳极电度。
Anodizing with thermal oxidizing at higher temperature will get rough films with a many hollow.
阳极氧化加复合的较高温度的热氧化将得到粗糙、并分布着许多凹坑的转化膜层。
Anodizing is a process of thickening the natural oxide layer that forms on the surface of aluminum.
阳极氧化是一种浓缩的天然氧化层形成的过程，对铝表面。
The results show that the optical constants of the AAO films strongly depended on anodizing voltage.
结果表明：随阳极电压的升高，AAO薄膜的折射率和厚度增大，消光系数减小。
In this paper, a new method is provided for a rapid anodizing porous tantalum pellet at room temperature.
本文提供了一种在常温下对多孔性钽片进行快速赋能的新方法。
WL-99 composite additive for swift aluminum alloy anodizing with wide temperature range has been developed.
开发了用于宽温快速铝合金阳极氧化的复合添加剂WL- 99。
The process of wide temperature swift aluminium anodizing and it's mechanism of additive agent are studied.
研究了宽温快速阳极氧化工艺，对宽温快速阳极氧化添加剂的作用机理作了分析。
The aircraft grade aluminum body with type 3 anodizing give this pen a very tough and reliable construction.
该型飞机3级铝阳极氧化的身体给这个钢笔一个非常艰难的，可靠的建设。
Furthermore, the effect of anodizing voltage on cell sizes, pore diameter, pore density and cell density are studied.
另外，研究了阳极氧化电压对晶胞尺寸、孔径大小、孔密度和晶胞密度的影响。
Unless general requirements, inspector shall also note out-of-size or burrs problem caused by material lost after anodizing.
除一般要求外，应该注意是否因氧化而引起的材料的损失而造成的尺寸不良，挂孔披锋等现象。
Porous aluminium anodizing film can be formed on aluminium surface in acidic electrolyte solution by electrochemical method.
酸性电解液中采用电化学方法可在铝表面形成多孔阳极氧化铝膜。
Hard anodizing film could be obtained on Al-Cu alloy surface which had been treated with solid solution treatment and natural aging.
经固溶处理和自然时效的铝铜合金可以进行硬质阳极氧化。
Surface treatment processes for magnesium (alloy) including cleaning, passivation, anodizing and application of organic coatings are reviewed.
综述了镁及其合金的表面清洗、 化学处理、阳极氧化、涂敷有机物等表面处理方法。
Thyristor power supply with ripple percentage equal to or less than 4.18% is suggested to meet anodizing and electroplating processes requirements.
认为晶闸管整流桥电镀电源需具有等于或小于4.18%的纹波因数值才能满足一些氧化和电镀工艺的要求。
Main cosmetic packaging containers, aluminum production, polishing, anodizing, computer R & D and production shaft, and hardware R & D and production.
主营化妆品包装容器，铝制品的生产，抛光，阳极处理，电脑转轴研发生产，及五金研发生产。
A porcelain like film with protective and ornamental function can be obtained by anodizing aluminum alloy in potassium titanyl oxalate acidic solution.
铝合金在草酸钛钾的酸性溶液中进行阳极氧化可得到具有装饰效果和防护作用的瓷质氧化膜。
Objective To study the shape, thickness and oxide percentage of major metal element of oxide film on Ni-Cr porcelain alloy after anodizing pretreatment.
目的分析烤瓷用镍铬合金在上瓷前进行阳极钝化处理对其表面氧化膜的形貌、厚度及主要金属元素氧化程度的影响。
Objective: This study is to determine the effect of different surface anodizing and degassing-preoxidation on bonding strength of porcelain to Ni-Cr alloy.
目的：研究非贵金属合金在上瓷前经过不同的阳极钝化条件处理及除气、预氧化对金瓷结合强度的影响。
The results show that, after being treated by ac phosphoric pore broadening, the electrolytic coloring performance of the anodizing aluminium film varies obviously.
结果表明，铝阳极氧化膜经磷酸溶液交流扩孔后，氧化膜的电解着色性能发生了明显变化。
Objective: To evaluate the influence of air oxidation, anodizing and tin coating sample on elemental composition and thickness of surface film of cast pure titanium.
目的：评价大气热氧化、阳极氧化和氮化钛镀膜对铸造纯钛表面膜组成和厚度的影响。
Objective: To evaluate the influence of air oxidation, anodizing and tin coating sample on elemental composition and thickness of surface film of cast pure titanium.
目的：评价大气热氧化、阳极氧化和氮化钛镀膜对铸造纯钛表面膜组成和厚度的影响。
应用推荐