Cobalt phosphides were synthesized by high-energy ball-milling technique.
采用高能球磨法合成磷化钴系列化合物。
The raw materials can be perfectly mixed uniformly with a uniform granularity distribution using wet ball-milling.
球磨湿混工艺能将原料混合均匀，并能有效地使粒度细化。
At the same time, these mechanisms showed the complexity about powders interaction in the high energy ball-milling.
这几种机理从不同的角度说明了高能球磨中，粉末颗粒之间相互作用时所发生的反应方式的复杂性。
The results showed that ball-milling treatment and calcining temperature exert an influence on sintering process of HA.
结果表明，球磨处理和粉体煅烧温度对HA坯体的烧结行为均有明显影响。
The results show that an alloy may be formed by ball-milling and amorphous character is enhanced with the increasing of the milling time.
结果发现，球磨可形成合金化，随球磨时间的增加，样品的非晶化逐渐加强。
The improvement of MA was due to the combination action or the reactivity activation on powder by physical energy fields assisted ball-milling.
采用物理能辅助机械球磨，从而使粉末得到复合作用或活性激活，是机械合金化效率提高的原因。
The optimum value of ball-to-powder weight ratio has been deduced from theoretical relationship between frequency, speed of collision and ball-milling conditions.
由碰撞频率、速率与球磨工艺条件的理论关系推导出了球料比的最佳值。
There exist a number of methods for fabricating aluminum flake both at home and abroad, the one employing the hydro-ball-milling technique is studied and presented in the article.
国内外生产片状铝粉的方法较多，本文重点介绍了采用湿法球磨工艺制备片状铝粉方面的研究。
The results show that one of the nano-Cu shows better tribological properties, the ultrasonic disperse process shows better friction-reducing properties than the ball-milling disperse process.
结果表明，其中一种纳米铜能够提高基础油的减摩性能，采用超声分散比采用球磨分散的减摩性能好。
Conclusion Under the protection of hydrophilic polymers, stable nanoparticle solution of niclosamide can be prepared by the method of planet ball-milling choosing high-energy ball-milling condition.
结论用行星式球磨方法，在亲水高分子的保护下，选用高能量球磨条件，可得到稳定的氯硝柳胺纳米剂。
Store the quicklime and gypsum in the tank after crushing and ball milling.
生石灰、石膏经过破碎、球磨后进入料仓储存待用；
The influence of ball milling time on hydrogen storage performance was also investigated.
研究了材料的组成和球磨时间对吸放氢性能的影响。
Methods of leuco-oxidizing, solvent treating, ball milling and acid treating are used for pigmentation of Vat Blue RS .
还原蓝RS颜料化主要采用了隐色体氧化法、溶剂处理法、球磨法和酸处理法。
XRD analysis revealed that MgO was not formed during ball milling of the magnesium alloy powder under the protection of ethanol.
将镁合金切屑在无水乙醇的保护下进行球磨，XRD分析显示镁合金粉末经过球磨没有被氧化。
Results show that hydrate characteristics of steel slag were increased after ball milling.
结果表明：钢渣经过球磨之后，其水化性能大大提高；
The results indicate that high energy ball milling together with low temperature quick hot extrusion is the most effective method for obtaining homogenous distribution of reinforcers.
采用高能球磨法混料和低温快速热挤压工艺相结合，是实现增强体颗粒均匀分布的最有效方法。
The amorphous forming relates with variety of the crystal size, defect and stress during ball milling.
此非晶合金的形成是晶粒细化、球磨过程中的缺陷和应力等多种作用的结果。
Mechanism of Reactive Ball Milling was discussed.
对球磨反应的机理进行了探讨。
The phosphogypsum can be calcined into quality building plaster via neutralized with lime, ball milled or water washed, ball milling pretreated.
磷石膏经石灰中和、球磨或水洗、球磨预处理，可煅烧成优等品建筑石膏。
The effects of polyethene glycol 20000 and sodium dodecyl sulfate on the dispersion of magnesium zinc ferrite slurry prepared by ball milling dispersion were studied.
选用聚乙二醇20000和十二烷基硫酸钠两种分散剂，通过球磨分散法制备镁锌铁氧体浆料。
Ball milling dye and organic liquid give highly satisfactory results.
球磨了的染料和有机液体可以得到很满意的结果。
Some key factors influencing the efficiency of ball milling were discussed in the paper.
对球磨过程中的一些关键的影响因素进行了分析。
The project made studies on the manufacturing process of the bright nanometer Ag powder, and fixed the process route of chemical reduction-mechanical ball milling.
本项目对纳米光亮片状银粉的制备工艺进行了研究，确定了化学还原—机械球磨的工艺路线。
Applying orthogonal experiment method, the influence of processes of ball silver powder precursor and ball milling on the properties of final flake silver powder were analyzed.
采用正交试验法，分析了前驱体球状银粉的制备及球磨工艺对最终片状银粉性能的影响。
Spheroidal graphite cast iron and graphite are chosen as raw material separately, ball milling method is used to fabricate carbon microspheres.
分别以球墨铸铁和石墨为原料，采用机械球磨法成功制备了碳微球。
The preparation process of KBF_4 nano powders by high energy ball milling and their :influencing factors have been studied.
探讨了高能球磨法制备纳米KBF_4粉末的工艺过程及影响因素。
The observation results of SEM and MS2000 indicate that cold welding, fragmentation and work harden occurred during high energy ball milling.
SEM和MS2000分析结果表明，高能球磨中存在冷焊、断裂和加工硬化现象。
The optimal processing parameters of ball milling have been obtained by experiments.
通过实验获得了最佳球磨工艺参数。
In order to improve working environment of hard alloy for mine, replacement of sand blasting by ball milling handling technology is put forward.
对矿用硬质合金的热处理和时效处理，通常采用喷砂工艺，为改善劳动环境，提出球磨处理技术取代喷砂，取得了明显的技术经济效。
In order to improve working environment of hard alloy for mine, replacement of sand blasting by ball milling handling technology is put forward.
对矿用硬质合金的热处理和时效处理，通常采用喷砂工艺，为改善劳动环境，提出球磨处理技术取代喷砂，取得了明显的技术经济效。
应用推荐