The beam shaping is desired for many applications.
光束整形是许多应用所必须的。
This allows for electrically controlled adjustable beam shaping.
这就虑及了电气控制的可调节射束成形。
A real ray tracing method was used to simplify the optical design of a Gaussian beam shaping system.
研究了真实光线追迹优化光学系统的方法以简化高斯光束整形系统的光学设计。
Optical Beam Shaping; Binary Optical Elements; Artificial Fish-swarm Algorithm; Optical Design; ZEMAX.
激光波前整形；二元光学元件；人工鱼群算法；光学设计；zemax。
A beam shaping algorithm for circular arrays antenna pattern based on adaptive antenna array theory is presented.
基于自适应天线阵理论，给出一种用于圆形阵列天线方向图的波束赋形算法。
The scheme requires no external beam shaping element and has the potential to be designed for high-power applications.
此方案无需外加光束整形元件，在高功率应用方面较有潜力。
The quality of laser beam is very important for many applications, such as beam shaping, diffuser, micro-lenses and MOEMS.
在激光技术应用的许多领域中，对激光光束的质量有着较高的要求。
The measured radiation patterns satisfy the requirements of beam shaping well, which demonstrates the effectiveness of this appr…
天线的实测方向图完全符合赋形波束的要求，表明该设计方法是可行的。
In this dissertation, laser beam shaping is selected as the breakthrough point, and liquid technology is used to realize the function of COES.
论文以激光光束整形为切入点，从一个新的角度进行探索，尝试用液晶技术来实现计算机光学元件的功能。
The results indicate that flat-top beam shaping and single-circle beam shaping at the focal plane can all be realized by using three-zone annular phase pupil filters.
模拟结果表明，利用三环相位光瞳滤波器，不仅可以在焦面上实现光强的平顶分布，而且还可以得到单环衍射光束。
Based on HIO algorithm, binary optical elements for spatial beam shaping are designed. For Gaussian beams, the shaping result is put forward through two different ways.
基于HIO算法，设计了用于光束整形的二元光学元件，从两条不同的途径给出了高斯光束的整形结果。
By using ZEMAX to simulate the diode laser optical path, including beam shaping, collimation, focus, etc., several kinds of spot outputs with various sizes was implemented.
利用ZEMAX光学设计软件模拟半导体激光光路，包括光束整形、准直、聚焦等光束变换方式，实现了多种尺寸的光斑输出。
This paper designs an optical system and some lenses for the BD OPU, including collimator lens, beam shaping lens for laser beam shaping, and cylinder lens for signal detecting.
本文设计了一套蓝光光学读取头的光路系统，包括用于光束处理的准直镜，整形棱镜，还有用于信号探测的柱面镜。
In the paper, it is attempted to choose suitable slices of phase for beam shaping by use of binary optics, for example, the uniformization of Gaussian beam is calculated numerically.
偿试利用二元光学的方法选择合适数的相位片对光束进行整形，并就高斯光束均匀化为例进行了数值计算。
This article has studied the coupling of the laser array and the optical fiber array by a new way, namely using a selfoc column-lens array as the component of the laser beam shaping.
本文从一个新的途径研究了激光器阵列与光纤阵列的耦合，即采用自聚焦柱透镜阵列作激光束整形器件。
Conclusion This research for beam shaping of the partially coherent beam offers new schemes for potential applications such as material processing, optical therapy and atom optics etc.
结论部分相干光束的光束整形研究为潜在的应用，如材料处理，光学治疗、原子光学等，提供了一个新的光束整形的方法。
The results of flat-top wave beam and cosecant square wave beam, which are gained using this method, are fairly good, testifying this method is effective in beam shaping of conformal arrays.
运用此方法得到共形圆柱阵列的平顶波束和余割平方波束方向图，效果较好，证明此方法对于共形阵列是有效的。
Finding out propagation and transformation characteristics of light beams through an optical system and in order to realize beam shaping and beam controlling becomes more important and practical.
掌握光束的传输和变换规律以实现光束整形、光束控制就显得尤其重要。
It has some important advantages such as wide Angle scanning, beam shaping, compact structure and low cost. These advantages make them very well suited to a number of military or civil applications.
它具有扫描角度宽，便于波束成形，结构紧凑、价格便宜便于大量生产等优点，所以在军事上和民用上有着广泛的应用前景。
The device comprises a semiconductor laser light source, an optical beam shaping system, an optical beam transmission system, an optical beam scanning system, an optical focusing system, and the like.
该装置包括半导体激光光源、光束整形系统、光束传输系统、光束扫描系统、光学聚焦系统等。
The principle of shaping Gaussian beam was studied theoretically and the Flattened Lorentzian(FL) function was chosen as the distribution expression of the flattened beam.
理论分析了高斯光束整形原理，并选择超洛伦兹函数作为平顶光分布函数；
In the end, "shaping laser beam" and "exactitude orientation of MEMS chip" etc improvements were put forward.
在论文最后提出了“激光光束整形”和“MEMS芯片的精密定位”等进一步改善方案。
A ruggedized design method for shaping diode laser beams, which can totally eliminate the effects caused by the temperature change or laser wavelength shift on output beam direction, is described.
本文叙述了一种变形双棱镜的加固设计方法，它能够完全消除温度变化与激光波长漂移对光束输出方向的影响，适于对二极管激光束进行变形。
The necessity of spatial shaping for laser beam is explained.
阐述了对激光器输出光束进行空间整形的必要性。
Developed a feeding nozzle which have four double-feeding pipes with co-axial shaping gas distributes on circle orientation of laser beam with uniformity and symmetry.
研制了一种在以激光束为中心轴的圆周方向均匀对称分布四个具有同轴汇聚气的双层送粉管的送粉喷嘴。
A practical result of the design and a fine quality laser beam after focusing and shaping are given out.
给出了一种实用的设计方案和获得了高质量的聚焦、整形光束。
As the simplest shaping pulse double pulse produced by a beam splitter is first used to ablate the sample.
使用分束片获得的双脉冲作为最简单的整形脉冲，首先被用来烧蚀样品。
Fiber coupling technique for high-power diode laser 2D arrays was introduced, such as beam-shaping, polarization multiplexing and wavelength multiplexing.
介绍了大功率半导体激光器二维阵列的光纤耦合技术，其中有整形耦合法、偏振合束法和波长合束法。
Fiber coupling technique for high-power diode laser 2D arrays was introduced, such as beam-shaping, polarization multiplexing and wavelength multiplexing.
介绍了大功率半导体激光器二维阵列的光纤耦合技术，其中有整形耦合法、偏振合束法和波长合束法。
应用推荐