该模量值可用于相同成分和制造工艺的丁腈橡胶垫片的结构设计中。
This compressive modulus of elasticity can be applied to the design of the rubber gasket which contains the same chemical composition and is made by the similar fabrication way.
本文研究了弹性体不饱和聚酯的合成，并对有关性能和丁腈橡胶的并用进行了讨论。
The synthesis and properties of elastic unsaturated polyester were investigated and the use of the elastomer compounded with nitrile butadiene rubber was discussed.
本发明公开了一种废纸污泥复合填充剂及其制备方法和在丁腈橡胶制品中的应用。
The invention discloses a waste paper sludge composite filler and a preparation method thereof as well as application of the waste paper sludge composite filler to a nitrile rubber product.
介绍一种研制的新品炭黑在丁腈橡胶中的应用情况，结果表明这种炭黑可用于橡胶密封制品。
The paper introduced the applications of a new developed carbon black in NBR. Test results showed that this kind of carbon black can be used to manufacture rubber seals.
本发明提供了一种环保友好、成本低、应用范围广的CPE改性丁腈橡胶发泡材料的制备 方法。
The invention provides a CPE modified nitrile rubber forming material which has the advantages of environmental protection, low cost and wide application scope and a process for preparation.
笔者以垫片的压缩试验数据为基础，用分析推理的方法，确定出了丁腈橡胶垫片的压缩弹性模量。
The compressive modulus of Elasticity of the butanone rubber gasket are given, based on the compressive test Value of this type gasket, with the analysis and inference method by the authors.
采用序列法制备氢化丁腈橡胶（HNBR）/聚甲基丙烯酸酯互穿聚合物网络（IPN）阻尼材料。
Abstract :Sequential interpenetrating polymer networks(IPNs) based on hydrogenated nitrile rubber(HNBR) and various polyalkyl methacrylates were synthesized.
介绍了几种主要的特种丁腈橡胶的性能和用途，并对国内丁腈橡胶生产厂商和科研院所提出了一些建议。
In this paper, the characters and USES of several special grades of NBR were introduced, and some advice was given to manufacturer and institutes in the field of NBR.
丁腈橡胶是合成橡胶的重要品种，在中国每年约有二十万吨的市场，并以7%的年平均增长速度在增长。
NBR is an important species among all the synthetic rubber products, with an annual consumption of 200,000MT and an annual growth rate around 7% in China.
研究了在酚醛树脂中添加丁腈橡胶粉末对粘合剂的流动性、固化速度、弯曲强度和洛氏硬度等性能的影响。
We researched the effect of powder NBR on thermal properties and mechanical properties of phenolic resin, including the binder flowability, curing rate, bending strength and Rockwell hardness.
介绍以聚氯乙烯与丁腈橡胶共混生产聚氯乙烯空气胶管的生产工艺流程、性能与特点、研制数据及研制过程。
The process technology, property, characteristic, developing data and process about PVC gas tube, produced by mixing PVC with NBR rubber are introduced.
以硅酸钠改性粉煤灰作为补强剂，研究了其补强天然橡胶(NR)、丁腈橡胶(nbr)的工艺及产品的性能。
The artifactitious process and mechanical properties of nature rubber (NR) and nitrile-butadiene rubber (NBR) using the fly-ash modified with sodium silicate as strengthening agent were studied.
研究了O型丁腈橡胶密封圈中腈基含量对其耐润滑脂性能的影响，讨论了不同性能润滑脂对丁腈橡胶的溶胀作用机理。
The resistance to lubricating greases of some O-ring NBR seals was studied in this paper. The swelling of NBR in different lubricating greases were discussed.
结果表明，高羧基丁腈橡胶具有硬度、拉伸强度和定伸应力高，耐磨性好，压缩永久变形大，加工安全性较差等特点；
The results showed that the high carboxylated NBR featured high hardness, tensile strength and modulus, good abrasion resistance, but greater permanent set and poorer processing safety;
膏状氯丁橡胶不仅能改善氯丁橡胶的加工性能．也能改善丁腈橡胶的加工性能，尤其对高硬度的氯丁橡胶制品效果更佳。
The paste CR could not only improve the processibility of CR, but also that of NBR. It was more effective when used in NBR product with high hardness.
本文采用极性的丁腈橡胶与短碳纤维复合，探讨了碳纤维及碳黑含量对复合材料电性能影响，以及该材料电性能随温度的变化情况。
The effect of carbon fiber content, carbon black content and temperature on the electic conductivity of the composite was studied in this paper.
用液体丁腈橡胶、聚丁二烯、聚醚、硅橡胶、不饱和聚酯和多种乙烯基酯树脂为改性剂，研究了它们对DAIP树脂的增韧作用。
The toughening of DAIP resin with liquid nitrile-butadiene rubber, polybutadiene, polyether, silicone rubber, unsaturated polyester and vinyl resins was investigated.
结果表明金属活性助剂mca，在不同的硫化体系中可提高丁腈橡胶的拉伸强度、硬度，改善丁腈橡胶的耐热老化性能及压缩永久变形性能。
The results have shown that MCA can increase tensile strength and hardness of NBR and also improve the properties of resistance to heat aging and compression set of NBR as well.
本文通过丁腈橡胶(nbr - 40)、天然橡胶(NR)、三元乙丙橡胶(EPDM)等弹性体与HDPE共混，提高了HDPE的形状回复能力。
In this thesis elastomers such as nitrile rubber (NBR-40), natural rubber (NR) and ethylene propylene diene monomer (EPDM) are blended with HDPE to improve the shape recovery properties of HDPE.
通过氧化锌与甲基丙烯酸或丙烯酸的中和反应，在丁腈橡胶（NBR）中原位生成了甲基丙烯酸锌或丙烯酸锌，研究了过氧化物硫化NBR的力学性能和交联结构。
The in-situ preparation of zinc methylacrylate or zinc acrylate through mixing zinc oxide(ZnO) and methylacrylic acid (MAA)or acrylic acid(AA) in NBR rubber vulcanized with peroxide was studied.
通过氧化锌与甲基丙烯酸或丙烯酸的中和反应，在丁腈橡胶（NBR）中原位生成了甲基丙烯酸锌或丙烯酸锌，研究了过氧化物硫化NBR的力学性能和交联结构。
The in-situ preparation of zinc methylacrylate or zinc acrylate through mixing zinc oxide(ZnO) and methylacrylic acid (MAA)or acrylic acid(AA) in NBR rubber vulcanized with peroxide was studied.
应用推荐