拉妮,我打算印出更多的三维打印机。
我八岁的时候,警察砸掉了父亲的三维打印机。
这种加工工艺叫作加层制造法,其工作原理有些类似三维打印机。
The process is called Additive Layer Manufacturing, and it works somewhat like a 3-D printer.
同时,三维打印机被用于制造一些老机器的稀缺零部件。
And printers are being used to create some rare parts for old machines.
研究小组利用三维打印机,使模具铸造鱼的硅橡胶配件。
The team used a 3d printer to make the molds for casting the fish's silicone rubber parts.
已有的三维打印机也被称做快速成型机,可以一层一层地构建出结构。
Existing 3-D printers, also called rapid prototyping machines, build structures layer by layer.
菲尔顿的研究员们开始使用三维打印机制造出用于测试风洞的一部分原型。
The researchers at Filton began using 3d printers to produce prototype parts for wind-tunnel testing.
CAD软件和三维打印机具有基本上成为一个“复位”按钮的真实世界。
CAD software and 3-d printers have essentially become a "reset" button for the real world.
现在,低成本的三维打印机获得了更广阔的市场,包括小型企业和个人都可以使用。
Now, lower-cost printers are available to a much wider market, including small businesses and individuals.
今年1月,跨国科技公司惠普同意销售Stratasys公司制造的三维打印机。
In January, the global technology company Hewlett-Packard agreed to sell 3-d printers manufactured by Stratasys.
在10分钟的经验捕获风扇,稍后传送到高分辨率三维打印机以创建一个塑像的图像。
The 10-minute experience captures an image of the fan, which is later sent to a high-resolution 3d printer to create a figurine.
早期的三维打印机应用范围有限,高昂的成本和有限的应用范围也意味着三维打印机的市场很小。
Early printers were limited. High cost and limited USES meant the 3-d printer market was small.
这台搅拌机也是用三维打印机生成的,因此只能用上一个月,然后我就需要打印出新的轴承部件和其他的移动部件。
It was made out of printed parts, so it would only last a month before I'd need to print new bearings and other moving parts.
而另一关注:让一个具有悬垂一个产品是一个三维打印机是一个挑战,因为它依赖于总是有一层的基础上。
And another concern: Making a product that has an overhang is a challenge with a 3d printer because it relies on always having a layer to build on.
如果东西卖得确实很好,他就可以大规模生产了——不论是使用传统的大规模生产还是大型的三维打印机生产。
If things go really well, he could scale up-with conventional mass production or an enormous 3d print run.
一家专门研究该领域的公司管理者,特里·沃勒斯称,现在,三维打印机生产出的产品中,超过20%为成品而非产品原型。
More than 20% of the output of 3d printers is now final products rather than prototypes, according to Terry Wohlers, who runs a research firm specialising in the field.
他们了解到,使用热或激光来熔化塑料三维打印机消耗的估计50至100倍的电能比注射成型,使相同的重量的目的。
They learned that 3D printers that use heat or a laser to melt plastic consumed an estimated 50 to 100 times more electrical energy than injection molding to make an object of the same weight.
几年前,要用三维打印机制造装饰灯罩看起来似乎是不可能完成的任务,但现在它已经成为了一个产业,并且拥有许多有竞争力的公司,销量上千。
Only a few years ago making decorative lampshades with 3d printers seemed to be a highly unlikely business, but it has become an industry with many competing firms and sales volumes in the thousands.
当然,家庭使用的三维打印机也有不足,使用桌面三维打印机制能制作出五立方英寸(12立方厘米)大小的产品;不足工业用三维打印机能够制作的产品尺寸的六分之一。
There are drawbacks, of course. The size of products that can be made using a desktop 3D printer is usually limited to something that can fit within a five-inch (12.7cm) cube.
一家名为organovo的公司已经开发出首台商用的三维生物打印机,该设备按细胞进行器官定制。
A company called Organovo has developed the first commercial 3-d bio printer that builds custom organs cell-by-cell.
美国科学家正在努力研制可打印三维立体器官管状组织的台式打印机,如果可能,希望这种打印机甚至能打印出整个器官。
Scientists are turning to desktop printers in an effort to produce three dimensional tubes of living tissue and possibly even entire organs.
涉及正在研制的三维立体打印机的成形技术,提供了一种解决喷头堵塞方法。
In the essay, the forming technology is concerned and provides a method to solve the jet problem.
本文讨论了细胞打印的生物学基础,并从器官三维建模、细胞打印机开发、连续堆积细胞和生物材料制造三维器官的方法等三个方面探讨了细胞打印研究现状。
The study discusses the biological basic of cell sprinting and the status of cells printing in three aspects which are organ 3D modeling, developing of cell printer and methods of cell and b…
本文讨论了细胞打印的生物学基础,并从器官三维建模、细胞打印机开发、连续堆积细胞和生物材料制造三维器官的方法等三个方面探讨了细胞打印研究现状。
The study discusses the biological basic of cell sprinting and the status of cells printing in three aspects which are organ 3D modeling, developing of cell printer and methods of cell and b…
应用推荐