通道开关网络和信号调理电路。
Universal switch network and signal modulate circuit are designed.
对传感器的工作原理进行了分析，并设计了传感器的信号调理电路。
Its operating principle is analyzed. The signal processing circuit of magnetic sensor is designed, too.
用DAC芯片程控信号调理电路的放大倍数，提高了系统的测量范围。
By changing the amplification multiple through DAC signals, the measurement range of the system is improved.
系统硬件包括压力传感器平板阵、信号调理电路、信号采集板以及计算机系统。
The hardware of this system includes pressure transducer board array, signal modulation circuit, signal capture board and PC.
在硬件电路设计中，信号调理电路和数据采集卡是整个系统测量精度的关键环节。
During the hardware circuit design, the signal conditioning circuit and the DAQ card is important to whole system's accuracy.
包括信号传感电路、信号调理电路、数据处理电路、人机接口及通信接口电路等。
This system is expanded with signal sensor, signal regulating circuit, data sampling circuit, communication module and human-machine interface.
根据待测信号的特点，选用超低噪声、低漂移元器件，设计了相应的信号调理电路。
Based on the features of signals to be measured, the corresponding signal conditioning circuits are designed with the components of ultra-low noise and low distortion.
该系统由水泵试验台、传感器、信号调理电路、数据采集卡、计算机处理几个部分组成。
This system consists of: pump test bed, sensors, signal processing circuit, data-collecting card, computer processing.
重量传感器输出的信号经信号调理电路输入6024E的模拟通道，经计算机分析处理；
The signal output from the weight sensor is transmitted to one of the analog channels of PCI-6024E board by conditioning circuit.
具体设计内容包括：设计具有输入阻抗大、高增益和高共模抑制比的脑电信号调理电路；
The main design work as follow: the former disposal circuits were designed, and the circuit possesses very high input resistance, common-mode rejection and voltage gain;
介绍了电动跑步机的测量原理与信号调理电路，给出了心率算法，并提出了软件设计思路。
This paper introduces the measuring principles and signal conditioning circuit of the electric runner, and puts forward the algorithm of heart rate some ideas on software design.
数据采集部分主要由信号调理电路、抗干扰滤波电路、模数转换电路及串行通信电路等组成。
The data acquisition is composed by signal adjusting circuit, anti-jamming filter circuit, AD converter circuit and a RS232 serial communication circuit.
所设计的电路简单、新颖、实用。可广泛用于模拟电子电路，特别是传感器的信号调理电路中。
The designed circuit is simple and novel and practical, and it can be used (extensively) in (analogue) circuits, special in signal condition circuits of sensor.
触发信号调理电路主要包括触发源选择，耦合类型选择，触发放大器和触发比较器等组成部分。
How to turn the signals into acceptable trigger pulse is the task of the trigger circuit, which includes trigger source choice circuit, coupling types choice circuit, trigger amplifier and comparator.
重点叙述了控制器的硬件系统构成，包括信号调理电路、脱扣控制电路和GPRS通信模块电路。
Focus on the controller hardware system structure, Including signal regulate circuit, tripping control circuit and GPRS communication module circuit.
设计出传感器输入输出信号调理电路和试验台架液压激振系统、磁流变阻尼器控制器的功率放大电路。
Design the signal adjust circuit for sensor, and the power amplification circuit for the hydraulic pressure system of test platform and the controller of magnetorheological dampers.
介绍了本课题中采用的电子鼻硬件系统的三个组成部分――传感器阵列、信号调理电路和数据采集卡。
Then the three key parts of electronic nose: sensors array, signal amplification circuit and AD board are also introduced.
音频检测系统主要由脉冲激励装置、音频传感器、信号调理电路、数据采集卡和微型计算机等部分组成。
The audio frequency inspection system is mainly composed of the impulse excitation device, acoustic sensor, signal conditioning circuits, data acquisition card and micro-computer and so on.
系统由8051单片机、16位模数转换器MAX1177、存储器、信号调理电路和串口电路等构成。
The system is composed of 8051MCU, 16bits A/D MAX1177, memory, signal condition circuit and serial interface.
本文以隔离的热电阻温度变送器信号调理电路为例给出了适用于其它传感器的隔离的变送器信号调理电路。
An isolated transducers signal conditioning circuit for other transducers is proposed taking isolated signal conditioning circuit for thermistor temperature transducers for example.
介绍ad698型线性位移差分变压器(LVDT)专用信号调理电路，应用ad698可简化电路的设计。
Signal conditioning circuit AD698 for Linear Variable Differential Transformer (LVDT) is introduced, and the application of this circuit can greatly simplify the circuit design.
最后进行的功能测试，包括信号调理电路测试，LCD显示测试，GPS信号收发测试，行驶状态数据测试等。
Lastly, some functional tests are taken, such as signal regulation circuit test, LCD display test, GPS signal receiving and sending test, steering data test.
本文介绍了便携式激光准直仪的工作原理，分析了激光器、PS D信号调理电路及数据采集处理系统的设计。
The principle of portable laser collimator is introduced in this paper and its laser device, PSD signal processing circuits data acquisition are analysed in detail.
基于该数学模型，优化设计了高可靠性、高稳定性的信号调理电路，并在聚焦元件自动测量系统中得到了实际应用。
Based on this mathematics model, the optimum signal-processing circuit, having high reliability and high stability, is designed and applied to the automatic measurement system of the focusing units.
数据采集系统包括信号调理电路、DSK接口电路、RS- 485通信接口电路、系统时钟电路及电源电路等。
The data acquisition system consists of the signal conditioning circuit, DSK interfacing circuit, RS-485 communication interfacing circuit, system clock circuit, the power circuit, and so on.
硬件部分包括各传感器信号调理电路模块以及由AD 574a, 89c 52,8255 A等构成的主板模块。
Its hardware interface includes sensor signal condition circuits and the motherboard constructed by AD574A, 89c52, 8255a, etc.
AD 10465是一款内置信号调理电路模块的全通道adc解决方案，提供改进的动态性能和完全匹配的通道间性能。
The AD10465 is a full channel ADC solution with on-module signal conditioning for improved dynamic performance and fully matched channel-to-channel performance.
本文针对该传感器进行了特性测试，并通过实验研究确定了喷油泵内齿条与传感器位置的物理零点，最后对传感器的信号调理电路进行了设计。
So it is the key to choice the sensor. The characteristics of sensor is tested. This paper adjusts the physical zero point between rack and sensor. The circuit of signal adjusting is design.
该数据采集系统采用TI公司的TMS320 LF 2407 A芯片为主控制器，另外设计了相应的外围信号调理电路、存储模块、通信模块等。
The data acquisition system adopted TMS320LF2407A chip of ti as main controller, in addition, designed peripheral signal processing circuit, memory module, communication module and so on.
该数据采集系统采用TI公司的TMS320 LF 2407 A芯片为主控制器，另外设计了相应的外围信号调理电路、存储模块、通信模块等。
The data acquisition system adopted TMS320LF2407A chip of ti as main controller, in addition, designed peripheral signal processing circuit, memory module, communication module and so on.
应用推荐