半固态金属加工是近年来金属加工技术研究的热点。
Semi-solid metal forming is a hot research point of the metal processing technology in recent years.
该软件能分析半固态金属金相组织中的固相组分及晶粒尺寸。
The software can be used for analyzing solid fraction and grain size in microstructure of semi solid metal.
介绍了半固态金属加工中使用的电加热炉的温度采集与控制系统。
The temperature collect and control system for electric heating furnace in Semi-Solid Metal Processing is introduced.
半固态金属成形技术的关键是制备非枝晶结构的半固态金属材料。
For semi solid metal forming, it is crucial to produce semi solid metal materials that have non dendritic structure.
结合半固态成形技术与微成形技术，探讨半固态金属的微成形性能。
This paper combines the technology of semisolid forming and micro-forming to discuss the micro-formability of semisolid alloy.
揭示了半固态金属成形过程中应变率和变形量对液相偏析影响的规律。
The effects of strain rate and engineering strain on liquid phase segregation in the process of semi-solid metal forming have been revealed in this paper.
半固态材料流变特性研究是半固态金属加工技术研究的重要组成部分。
The research on the rheological behaviour of the semisolid metal is the fundamental for the understanding and development of the semisolid metal processing technology.
半固态金属成形技术作为一项新兴的金属成形技术，是一种具有巨大发展潜力的加工技术。
Semi-solid metal forming technology is a new metal forming technology and it is a forming technology with enormous developmental potentiality.
半固态金属成形技术具有许多优点，被专家们称为21世纪新兴的金属制造关键技术之一。
Semi-solid metal technology is characterized by many advantages and believed as the key metal manufacture technology in 21 century by specialist.
半固态金属成形技术具有许多优点，被专家们称为2 1世纪新兴的金属制造关键技术之一。
There were many advantages in semi solid metal forming technology. Specialist believed it would become the key metal manufacture technology in 21 century.
试验表明，在半固态金属加工模具内表面用静态法制备陶瓷涂层，将显著提高模具的使用寿命。
The results show that the ceramic coating on semi-solid forging mould can improve the service life of the mould remarkably.
半固态金属具有良好的流动性，易于通过普通加工方法制成产品，并且具有加工温度低，产品质量高等优点。
Semi-Solid Metal shows good flowable behaviour so that it could be manufactured easily by general working methods, and it also has some advantages such as low working temperature, high quality etc.
半固态金属加工技术被认为是21世纪最具有发展前途的近净成形技术之一，其关键环节是半固态浆料的制备。
Semisolid metal processing technology is regarded as one of the near-net shape forming technologies with wide application in 21 century, and the preparation of semi-solid slurry is the key technique.
研究结果表明，适当的感应加热工艺能满足金属半固态成形技术中的二次加热的技术要求。
Result of research shows that proper technology of induction heating satisfies the technologic request in semi-solid metal forming.
半固态加工是金属材料成形领域中的一种新工艺。
Semi solid forming is one of new types of material processing.
半固态成形具有加工温度低，变形抗力小的特点，为高效低能实现金属近净成形提供了现实可能。
Due to the special properties of semi-solid metal, it provides a possibility for metal near net shaping with high efficiency and low consumption.
在所有半固态镁合金试验中，水淬试样的晶粒密度都大于重力铸造的金属型试样的晶粒密度。这表明在半固态成型过程中，晶粒有很强的长大合并的趋势。
The density of the quenchinching samples was higher than that of the metal-mould ones and the grains were much easier to grow and merge in the shaping of the semi-solid alloys.
新工艺为金属基复合材料压力下浸渗半固态模锻成形一体化工艺奠定了研究基础。
It establishes the study foundation for metal matrix composites prepared by infiltration-stamp forging in semi-solid state integral technology.
金属半固态成形作为21世纪一种近净成形新技术，愈来愈引起人们的广泛关注。
Semi solid metal forming as a new near net shape technology in 21 century generally attracts people's attention.
半固态加工是金属材料成形领域中的一种新工艺。本文分析了铝合金半固态成形技术的现状及发展趋向。
Semi-solid forming is one of new types of material processing. This paper analyses the present and the future of this new forming technology.
介绍了AZ 91d镁合金表面金属涂层处理技术的新进展以及半固态处理技术在AZ 91d镁合金上应用的新进展。
Metallic coating as a newest surface treatment technology and the semi-solid casting technology in terms of processing methods were briefly introduced, too.
采用旋转磁场型电磁搅拌器对搅拌坩埚中的金属液体进行连续的电磁搅拌，制备出初生相或先析出相为球状或近球状的半固态流变浆料；
Rotational electromagnetic stirrer is employed for continuously stirring the liquid cast iron and steel to produce the rheological slurries suspended sphere or near sphere primary particles.
本发明的方法和装置可满足短流程制备无氧化、质量良好的金属半固态浆料，同时可实现金属液的准确定量和温度控制。
The method and the device can realize short-flow preparation of non-oxidation and good-quality metal semisolid size, as well as the accurate quantification and temperature control of molten metal.
本发明涉及一种金属材料的半固态加工的方法和相应的装置，属于金属加工的近终成形技术领域。
The invention relates to a semisolid processing method of metal materials and a corresponding device and belongs to the technical field of near-net shaping of metal finishing.
试验证明，模糊控制技术的应用提高了该装置的温度控制效果，实现了良好稳定的铝金属半固态浆料微观组织控制作用。
The practical application verifies that fuzzy control can improve the temperature-control efficiency of the apparatus, realizing the ideal control for microstructure of semis...
试验证明，模糊控制技术的应用提高了该装置的温度控制效果，实现了良好稳定的铝金属半固态浆料微观组织控制作用。
The practical application verifies that fuzzy control can improve the temperature-control efficiency of the apparatus, realizing the ideal control for microstructure of semis...
应用推荐