阐述了基于特征和约束的参数化驱动技术建立图形库的方法。
This paper presents the method of establishing graphics library driven by the features and constraints parameterization technique.
介绍了电站锅炉空气动力场的冷态模化的基本相似模化原理、试验控制参数的计算方法及相关的测量技术。
Present the basic similarity simulation principle followed in cold simulation of power plant boiler dynamic field, way of calculating test control parameters and associated measuring techniques.
该文介绍了运用参数化设计技术进行离心风机CAD系统软件设计的方法。
This paper discusses the method of parameter design technology in developing TLT Blower CAD system.
基于约束的参数化几何造型技术是一种新型、快速的造型方法。
Parametric geometry modeling technique based on constraint is a kind of new typed rapid method of modeling.
论述了参数化设计技术的基本概念，对预应力钢束设计的方法进行了分析研究。
In this paper, the basic concept of parametric design technology is described, and the design method of prestressed tendons is analyzed.
介绍了应用ads技术在卷板机设计中有关设计计算与参数化绘图融为一体的方法和步骤。
The paper introduces the method and procedure of using ADS technology to combine design calculation and parametric plotting as one unit during designing the roller bending machine.
最后系统采用参数化技术以及零部件拼装的方法绘制设备整体结构装配图，给出了参数化绘图的方法以及消隐的实现。
At last the system completes the assembly drawing of equipments using the parameterized technology and the method of parts scrabbling. The parameterized drawing and hiding are realized.
对链传动CAD系统中采用的参数化求解方法、基于特征语义的设计以及基于CASE的推理技术的理论及其实现进行了论述。
Parametric solving method, feature semantics design and CASE based reasoning technique applied in chain transmission CAD system is presented in the paper.
本文将网络化信息发布技术应用于CAD系统的零件设计，提出了通过网络化参数驱动建立三维模型的新方法。
In this dissertation, networked information releasing technology was applied to part design in CAD system, brought forward a new three dimensional modeling method by networked parameter drive.
基于参数化技术的目标跟踪方法包括两方面：基于目标运动参数的跟踪方法和基于目标图像信息的跟踪方法。
Target tracking based on parameterized technique covers two aspects, that is, tracking methods based on motion parameter or based on image information.
在系统中有两个关键技术，即非参数化采样方法和灵活的线条画模板。
There are two key elements in this system, a non-parametric sampling method and a flexible sketch model.
本文研究了UG的参数化建模技术，对基于特征和基于草图两种建模方法作了详细论述。
The paper studies in detail parametric modeling methods provided by UG, which are respectively called method based on feature and that based on sketch.
本文阐述了机械CAD系统开发过程中的关键技术：参数化图形库的建立方法及其建立后的图形库的管理。
A key technique for the development of CAD system is described: the building method of parametric graph library and its management.
提出了一种基于CATIA参数化和智能化技术实现自动装配的方法。
An automatic assembly method based on CATIA parameterized and intelligent technology was proposed.
讨论了减小动态误差、多通道协调加载、数字化参数设置和控制、自动加载、多机通讯等技术的实现方法。
The method to decrease dynamic error, load coordinately and automatically, digitize in control, communicate with other computer is discussed.
本文对沙漠化经济损失货币估值的程序、指标体系、方法和技术参数等进行了分析与探讨。
In this paper, the program, criteria system, methods and indices of evaluation of economic loss of sandy desertification have been introduced to readers.
研究利用参数化有限元技术分析复合材料层合结构力学性能和结构可靠度的方法，并基于ANSYS软件平台开发相应的参数化有限元程序。
Parametric FEM technique is used to analyze the mechanical performance and structural reliability of composite laminate structures. The parametric FEM code based on ANSYS is given.
由于先进的电脑设计技术为建筑设计提供了新的方法，人们对参数化设计的兴趣日益提升。
We have seen a growing interest in parametric design as it offers a new approach to architecture based on advanced computational design techniques.
利用参数化技术完成了标准件模型的建立，通过用户自定义特征的方法建立开孔特征，并实现了二者的关联。
The models of each standard part could be created based on parametric method, and the pocket feature related to the standard part could be created with UDF (user defined feature) method.
研究了产品模块划分、模块组合、模块化设计和管理技术及零部件参数化设计方法。
Product module partition, module combination, modularization design, management technology and parts parameter were investigated.
基于RF I信号的窄带性质，简要综述了抑制rfi技术的参数化方法。
Based on the narrowband property of RFI, the parametric methods of RFI suppression are discussed.
提出了基于图形理解的智能型参数化建库工具的研究思想及实现方法，实现了约束图形的建立自动识别及求解等关键技术。
This paper presents a kind of research idea and realizing method of Lib making Tool of Parametric Graphic Method based on constraints.
介绍基于UG参数化技术的二次开发方法，对二次开发中的接口技术进行了探讨，并给出了程序示例。
The methods of secondary development for UG based on parameterized technology were introduced. The interface technology in secondary development was discussed, and a typical example was given.
在分析当前三维参数化设计技术的基础上，结合CAD系统、参数化思想和层次型数据表技术，提出了一种产品级的参数化变型设计方法。
Having analyzed 3d parameterized design technique, a product-level parameterized variant design method was presented based on CAD system, parametric thinking and hierarchical table in database.
提出一种基于逆向工程技术建立髋臼软骨参数化曲面模型的新方法。
In this paper, we present a novel parametric surfaces intersection algorithm based on discrete surfels.
研究基于知识工程（KBE）技术实现参数化设计的两个基本内容：一、引用知识工程的方法创建模型实例；
The paper mainly studied the following contents:(1)Researched the basic contents in parametric design on KBE technique: the first, create models of the parts using of the KBE technique;
对基于CATIA的三维参数化建模方法及其技术进行了研究，详细地阐述了三维参数化建模的基本方法和一般步骤。
A study is carried out upon three-dimensional parametric modeling method and its technology based on CATIA, the basic method and general steps of 3-d parametric modeling are expounded in detail.
系统采用三层结构模型，应用对象设计方法、参数化驱动技术实现。
This system is applying the three level mode and according the need of the designing object, has made realized of the technology of datum drive.
系统采用三层结构模型，应用对象设计方法、参数化驱动技术实现。
This system is applying the three level mode and according the need of the designing object, has made realized of the technology of datum drive.
应用推荐