复合酶酶解条件的优化采用响应面法。
Optimum hydrolysis conditions of mulriple enzymes were investigated with response surface method.
采用响应面法设计优化实验。
Response surface methodology design was used to design and evaluate the experiment.
运用响应面法确定超声提取田基黄的最佳条件。
The optimal conditions for ultrasonic extraction of Hypericaceae were determined by response surface methodology.
利用响应面法对红花油的乙醇解反应进行了优化研究。
The ethanolysis of safflower oil was optimized through the response surface methodology.
采用响应面法优化超声波提取松茸菌丝体多糖的条件。
Response surface analysis methodology (RSM) was used for optimizing ultrasound-assisted extraction of Tricholoma matsutake mycelium polysaccharides.
提出了用二次序列响应面法分析重力坝可靠度的方法。
A method to analyze reliability of gravity DAMS using the second order sequence response surface method is described.
响应面法；
摘要：本文研究了响应面法优化柿叶总黄酮缓释微丸的载药量。
Abstract: Response surface methodology was applied to optimize the drug loading rate of persimmon leaf total flavonoids sustained release pellets.
本文应用响应面法并考虑各种不确定因素对桁架桥力学行为进行了研究。
Reponse Surface approach including uncertainty effects is applied to study the mechanical performance of truss Bridges.
以脱轨系数为依据判断列车能否正常行驶，采用响应面法求解失效概率。
Coefficient of derail is used to judge whether a train is in the normal running state or in derail state.
表明响应面法超声辅助提取优化磷脂脂肪酸工艺的研究方法简便、可靠。
The response surface methodology used for the optimization of ultrasonic-assisted extraction conditions of PLFAs from forest soil was simple and reliable.
实际的悬索桥颤振可靠度应该采用基于有限元法的改进响应面法进行计算。
The flutter reliability could be more accurately analyzed by using the proposed method based on a deterministic finite element method in which the limit state function is implicitly represented.
基于响应面法进行了二维混合压缩超燃冲压发动机进气道的多目标优化研究。
The uniform design and response surface methodology(RSM) are applied to the multi-objective optimization of a 2-D mixed compression scramjet inlet.
摘要 ： 利用单因素实验和响应面法优化康定鼠尾草中迷迭香酸提取工艺。
Abstract : The extraction technology for rosmarinic acid from Salvia prattii Hemsl. was optimized by single factor tests and response surface analysis.
结论：响应面法可在连续范围内进行分析，具有实验周期短，精密度高的优点。
Conclusion: Central composite design and response surface method can be used in continuous range analysis, with the short experimental cycle and, the advantages of high precision.
现有基本的结构可靠度计算方法可分为一次二阶矩法、蒙特卡罗法和响应面法。
The present usually reliability analysis method for engineering structures are Monte Carlo Simulate (MCS), First-order Second-moment method (FOSM) and reliability Surface method (RSM).
在单因素的基础上，利用响应面法对黑糯玉米发酵乳饮料的发酵条件进行了优化。
Based on single factor tests, the response surface methodology (RSM) was used to optimize the fermentation technological conditions for producing lactic beverage from black glutinous corn.
在单因素的基础上，利用响应面法对黑糯玉米发酵乳饮料的发酵条件进行了优化。
The response surface analysis(RSA) was used to optimize the technological conditions for fermentation of glutinous corn to make lactic beverage.
应用数据处理软件STAT51对实验数据进行处理，并用响应面法分析实验数据。
Experimental dat are proceeded by using data processing software STAT51 and is analyzed clearly by the response surface method.
试验表明，响应面法对太白贝母粗多糖提取条件的优化是可行的，可用于实际预测。
The results showed that the optimization process using response surface methodology was feasible. It can be used in practical forecasting.
以岩质边坡平面滑动破坏模式为例证明随机响应面法在边坡可靠度分析中的有效性。
An example of reliability analysis of rock slope stability with plane failure is presented to demonstrate the validity and capability of the proposed SRSM.
方法：以总多酚含量为指标，采用响应面法对主要工艺参数进行优化并得到回归模型。
Method: Response surface analysis was conducted for optimizing the main technical parameters with the content of total polyphenol as index, and received the regression model.
同其他模拟技术相比，在精度相同的情况下，神经网络响应面法可以大大减少模拟时间。
Compared with other simulation technique, neural network response surface method can greatly reduce the simulation time at the same precision level.
通过线性回归和相似因子法比较人工神经网络和基于二元二项式的响应面法的预测能力。
The regression equations and similar factors were used to compare the predicability of the ANN and response surface method based on the binomial equations.
在单因素试验基础上，利用二因素中心组合设计原理及响应面法分析建立二次回归模型。
Based on the results of single-factor experiments, a quadratic regression model was established with the help of two factors central composite experimental design and the response surface method.
经过神经网络响应面法的检验，证明TAA方法是一种实用而又有效的风险概率计算方法。
Verified by network response surface, TAA was improved to be an applied and valid method of calculating the risk occurrence probability.
然后以膳食纤维的持水性、得率为响应值，采用响应面法优化酶法提取麦麸膳食纤维的工艺。
Taking water holding capacity and yield as response values, extracting dietary fiber from wheat bran by enzyme method was optimized by response Surface Analysis.
采用响应面法建立了表示比吸能随材料参数而变化的曲面，和高次多项式拟合时的相对误差曲线。
Then the response surface method(RSM) is utilized to establish the response surfaces or curve of SEA vs. material parameters and the curves of relative error in high-order polynomial fitting.
探讨水解时间、盐酸浓度和水解温度对异黄酮水解率的影响，并通过响应面法确定最佳水解条件。
The effects of hydrolysis time, hydrolysis temperature and hydrochloric acid concentration on hydrolysis rate of Fructus Sophorae isoflavones were investigated.
分别采用蒙特卡罗法和响应面法计算了轮盘结构可靠度，并对其随机性的影响因素进行了灵敏度分析。
The disk structural reliability is calculated by use of Monte Carlo Simulation ( MCS ) techniques and Response Surface Method (RSM). The random variable sensitivity is also analyzed.
应用推荐