主要分析了二段生物接触氧化法处理机理及其主要工艺参数设计；
This paper analyses the wastewater treatment's mechanism of two-stage biological contact oxidation process and the design for its main process parameters.
系统主要功能包括：通用铸造工艺参数设计、实用冒口设计、浇注系统设计等。
This system consists of the common casting process parameter design module, the practical riser design module, the gating system design module, and soon.
通过误差逆传播(BP)网络实现了逆映射，建立了工艺参数设计的神经网络模块。
The inverse mapping is achieved through BP network, and neural network modul is constructed for designing process parameters.
介绍注射模冷却模拟技术的基本原理及在注射模冷却系统和工艺参数设计中的应用。
The basic principle of cooling simulation technology and its application in the injection mold cooling system and the design of the processing parameters are introduced.
该方法在机械扩径工艺参数设计方面的应用结果表明，其优化效果好于非稳健优化设计方法。
A robust optimization designing method for the technical parameters of plastic forming processes based on quality control is proposed in this paper.
本文提出了一种进行工艺参数设计的新的试验方法，它的主要优点是，提高了产品性能的稳定性。
This paper proposes a new experiment method for designing technology parameters. Its main goodness is that it will improve the steadiness of the products character.
在所研究理论模型及工艺流程分析的基础上，开发了动力压井工艺参数设计软件，并进行了实例验证。
Based on the research and analysis of the theoretical model and construction process, it developed dynamic kill software, and the example is verified.
在UG造型软件基础上开发了铸造工艺CAD系统，包括工艺参数设计、冒口设计和浇注系统设计等模块。
The CAD system of casting process, including processing parameters, riser and gating system design modules, has been developed based on UG molding software.
采用集成基于事例推理，模糊推理，模糊神经网络(FNN)等多种人工智能推理技术，建立了铝合金电阻点焊工艺参数设计系统。
A process parameters design system of resistance spot welding of aluminum alloys integrating case based reasoning, fuzzy inference and fuzzy neutral network (FNN) was developed.
叙述了把电路模拟与实际工艺结合起来的参数提取程序的设计。
The design of parameter extraction program based on the circuits simulation combined with practical technology is also introduced.
所得结果有助于工艺参数的优化设计。
All the results are helpful for process parameter optimal design.
本文描述了在设备上进行HIP致密化机制研究、HIP工艺参数的设计与选择、包套的研究等工作的必要性和可行性。
This paper describes the necessity and feasibility for studying HIP densification mechanism, designing and optimizing process parameters and capsules using this equipment.
介绍了柳州市文昌综合楼空调系统水源热泵取水工程的工艺流程、设计参数及特点。
The process flow, design parameters and characteristics of intake works of water-source heat pump for air-conditioning system in Wenchang Mansion in Liuzhou City were introduced.
需要通过对公路施工技术的管理工作保障施工过程工艺技术参数符合设计要求，保障公路施工质量。
Through the management of security construction process technology parameters on the highway construction technology meets the design requirements, guarantee the quality of highway construction.
结果表明为了得到理想的制品外观和性能，需要对挤出螺杆、加工工艺参数、型坯设计和拉伸比进行改进。
The results showed to produce product with perfect appearance and property, modifications of screw, processing parameter, parison design and stretch ratio should be made.
为此，利用正交试验设计方法对九7区注汽工艺参数进行了敏感性分析和优化。
Therefore, steam injection parameters for Nine-7 Block were analyzed and optimized using orthogonal experiment design.
文中对该工艺的设计基础、结构参数及工艺参数、工艺特点及效能进行了较详尽的分析。
In the paper author have analysed the basic design, the structure and best parameter, the characteristics and efficiency of this technology with more detail.
本文介绍了注塑模具CAE，论述了用计算机优化制造工艺和模具设计参数的方法。
This paper introduced the CAE for injection molding, discussed the methods to optimize manufacturing technology and parameter of mould design with computer.
数值结果对捏合盘的设计和工艺参数的选择有一定的指导意义。
Numerical results are of great significance for guiding of kneading disc design and processing parameter selection.
本文介绍了电晕处理技术的设计要点、工艺参数及经济效益。
This paper mainly introduces the design essentials, technological parameters and applications of the technique.
通过对甲基异丁基酮生产装置精馏系统的优化模拟，得到了整个流程的工艺设计参数。
Process design parameters for the whole flow sheet of rectification system in the methyl isobutyl ketone (MIBK) production facility are obtained through optimized simulation.
铸件浇注系统和工艺参数的设计是否合理在很大程度上决定了铸件的质量。
Whether the design of gating system and process parameters is reasonable or not, they decide the quality of a casting in a great extent.
吸丝带是烟厂吸附法输送烟丝的主要部件，易耗、成本高。本文介绍了自行设计、研制的吸丝带，其工艺流程、工艺参数及机械设计情况。
This paper introduces a cut tobacco adsorbed conveyer belt for high speed cigarette machine which is designed and developed by oneself, and its technological process and parameter, mechanism design.
目的为大型DAT - IAT工艺在寒冷地区应用提供设计参数和运行管理经验，促进该工艺的推广应用。
The purpose of the article is to supply designing parameter and running experience about great DAT-IAT craft applied in cold area and promote application of the craft.
阐述了三种处理模式的原理和工艺设计参数。
The principle and technique design parameters of every model were expounded.
说明用神经网络模型描述微囊制作参数与性能之间的关系，用遗传算法优化微囊制作工艺参数，能设计出性能最佳的微囊制作工艺参数。
The optimum process parameters could be obtained using ANN model to describe relationships between process parameters and performance and GA to optimize process parameters.
结果表明，为了得到理想的制品外观和性能，需要对挤出螺杆、加工工艺参数、型坯设计和拉伸比进行改进。
The results show that the optimal bottle performance requires modified screw, processing parameter, parison design and stretch ratio.
通过对涂层梯度设计与工艺参数的控制，实现涂层成分梯度与结构梯度的分布。
Gradient condition of constituent and density in coatings have been achievement by a coating design and process control.
描述了田口方法在钼材料性能研究中的应用，并详细给出了材料研究中热等静压工艺参数的设计过程。
The application of Taguchi Methods in the study of molybdenum property is described. And the processes of HIP parameter design are given in detail.
介绍了日本目前石油化工废气处理技术的几种代表性工艺。简单叙述了工艺流程、设计参数以及处理效果。
In this paper, several kinds of technology for waste gas treatment of petroleum and petrochemicals in Japan were introduced, including flow chart, design parameters and effects etc.
应用推荐