介绍了汽车玻璃落模弯曲成形中回弹的机制，建立了有限元模型。
The spring-back mechanism in the drop bend-forming of automotive glass is introduced, and the finite element model is established.
对超越离合器关键传动件建立了有限元模型，进行了模态分析、强度分析。
Build finite element models for key transmission parts of overrunning clutch and analyze their mode and strength.
对结构和所受载荷都非常复杂的某大型组合管式反应塔建立了有限元模型。
A finite element model of large combined tubular reactor with complicate structure and loads was built up.
首先根据已知的试验数据建立了有限元模型，进而验证了有限元模型的可靠性。
First, a finite element model has been established. Then, the model has been validated against test results.
本文建立了有限元模型，对有檩屋盖和无檩屋盖钢结构厂房进行了静力和动力方面的分析研究。
The paper presents static and dynamic analysis of steel-structure factory with steel purlin roof and factory with roof without purlin.
提出了嵌入形状记忆合金丝和压电陶瓷片作为联合变形驱动器的二元智能结构，并建立了有限元模型。
A hybrid smart structure integrated with shape memory alloy slims and piezoelectric ceramic patches as united actuators, was presented and modeled by finite element methods.
介绍了液压成型技术的优点、现状及其工艺特点，以某汽车仪表板梁液压成型为例建立了有限元模型。
Firstly, advantages, application status and technological traits of tube hydroforming technology are introduced in this paper, and FEM models of instrument panel beam hydroforming are built.
根据正交切削特点建立了有限元模型，应用弹塑性力学讨论了切削变形区的弹、塑性阶段的应力、应变状态。
Establish finite element model, and use elastic - plastic mechanics to discuss stress-stain state of elastic and plastic deformation in cutting zone.
针对某重型卧式车床主轴下沉问题，基于Ansys软件对其主轴系建立了有限元模型，对主轴系静态性能进行了分析。
In order to look for the reason of a main shaft sinkage in a heavy-duty horizontal lath, a finite element model for the lath's main shaft system is established based on ANSYS.
以高速立式加工中心主轴箱为研究对象，针对其结构特点，利用ANSYSWorkbench平台建立了有限元模型。
The headstock of high-speed vertical machining center is taken as the object of study the finite element model is established based on structural features taking advantage of ANSYS Workbench.
通过对接触网刚性悬挂的模型的假设在ANSYS软件中建立了有限元模型，经模态分析计算得到了接触网刚性悬挂固有频率。
The ANSYS software is used to carry out the mode analyzing calculation and obtain the inherent frequency of the overhead rigid suspension catenary.
基于盘式刹车在下钻过程中的制动特性，建立了水冷式刹车盘下钻过程中循环制动的有限元分析模型。
Based on the brake characteristic of water-cooling disc brakes during going down, the FEM model of thermal analysis during cycle braking is established.
对304不锈钢进行了恒定温度下多种载荷的小冲孔蠕变试验，在此基础上建立了304不锈钢小冲孔蠕变试样的有限元模型。
The finite element model was established based on the small punch creep test of SS304 steel specimen in the condition of constant temperature and different loads.
采用ANSYS有限元分析软件，建立了由南京昊中建筑设备租赁有限公司提供的型号为QTZ40塔机的有限元模型。
The element mode of QTZ40 tower crane was founded by the software of ANSYS, which was produced by the Wuzhong Architecture Equipment Lease limited Company in Nanjing city.
将吊臂截面作为整体考虑，建立了吊臂结构局部稳定性计算的参数化有限元模型和参数优化模型。
Considering the boom cross section as a whole, a parametric finite element model and a parametric optimization model for local stability calculation of a boom structure were established.
建立了滑动轴承油膜的有限元模型，分析了油膜对船舶轴系轴承反力的影响。
The finite element model of the oil films was established. The influence of oil films on the reactions of marine shaft system was analyzed.
本文应用有限元方法，建立了横流式农用清选风机内部的气体流动数值模拟模型。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ANSYS有限元分析软件计算了负重轮的应力应变分布。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
结合大型有限元软件ANSYS，建立了筏形基础地基相互作用体系的全三维有限元模型。
Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.
建立了滑动轴承油膜的有限元模型，分析了油膜对船舶轴系轴承反力的影响。
It is analyzed for the influence of oil films on the reactions of Marine shaft system by establishing the finite element model of the oil films.
建立了热过程的数学模型，并采用有限元等数值方法模拟其热过程。
A mathematical model for thermal process is established and the process is simulated by numerical methods such as finite element method etc.
本文将理论、软件工具和实验有机结合起来，建立了合适、正确的这种特殊结构的有限元模型。
This paper integrated the theory, software with the experiment and established a reasonable, proper FEA model.
基于支承法兰盘的结构特征，通过目标函数的建立、设计变量的选取以及约束条件的确定建立了优化设计的有限元模型，并对法兰盘进行了静力分析。
Based on the structural characteristics of bearing flange, the optimization model is established according to the objective function, design variables and constraints, and make a static analysis.
在考虑这一特点的基础上，建立了套管应力计算的力学及有限元模型。
Based on this point, the mechanics and finite element models for casing stress calculation are established.
利用ANSYS软件建立了剑杆织机机架的有限元模型。
The FEM model of rapier loom frame is established with ANSYS software.
在此基础上，建立了火炮整体的有限元模型。
On this basis, the finite model of the whole gun has been established.
在此基础上，建立了火炮整体的有限元模型。
On this basis, the finite model of the whole gun has been established.
应用推荐