本文描述逆热传导有限元方法及其应用。
The inverse heat conduction finite element method and its application are described.
利用有限元方法分析验算了机座和转子的强度。
Analysing and calculating the strength of generator frame and rotor with finite element method.
作者阐述并分析了有限差分方法和有限元方法。
Authors described and analyzed the finite difference method and finite element method.
目前国内外普遍运用有限元方法研究船体的总纵强度。
It was universal to study ship's longitudinal strength by using the finite element-method.
最终选取连续介质有限元方法对实际工程进行数值模拟。
Finally, applied continuous medium finite element method to proceed numerical simulation to practice project.
用有限元方法分析了其反射相位特性及表面波传输特性。
The reflection phase property and surface wave dispersion are analyzed using finite element method.
但目前的特征有限元方法大多是对拟线性标量方程给出。
However, the mostly existed characteristic methods are the schemes for the quasilinear scalar equations.
采用有限元方法模拟了基桩负摩阻力随着固结时间的变化。
Change of negative friction in pile with consolidation time is simulated by finite element method.
通过引入有限元方法，混合分析法可适用于结构可靠度问题。
By introducing the FEM, the mixed method is extended to perform finite element reliability analysis.
为应用随机有限元方法对随机渗流进行分析提供了理论依据。
This provides a foundation for the analysis of the stochastic seepage with stochastic finite element method.
利用有限元方法对该结构内部的应力场和位移场进行了研究。
Finite element method is used to study stress and place moving field inside the structure and electric measure method is utilized to verify the result of calculation.
指出了有限元方法在金属切削模拟中的可行性和存在的问题。
Finally the feasibility and problems of FEM simulations in metal cutting were pointed out.
自适应有限元方法在实际工程问题的分析中有重要的应用价值。
Self adaptive finite element method has its important application value in the analysis of practical engineering problems.
初步探索了利用有限元方法进行汽车室内噪声优化的基本方法。
This paper develops the way of optimizing vehicle interior noise while the finite element method is employed.
最后，用有限元方法对隅撑—支撑框架的耗能性能进行了分析。
At last, energy-dissipation of the KBF has been analyzed with the finite element method.
这提供了一个计算机模型，在良好的基础，特别是在有限元方法。
This provides a good grounding in computer modelling and in the finite element method, in particular.
用三维非线性动态有限元方法研究了地震的动态触发的可能机制。
Three dimensional nonlinear FEM is adopted to study the mechanism and the dynamic process of earthquake triggering.
强度折减有限元方法分析边坡的关键问题是临界破坏状态的确定。
The key of strength reduction method is how to define the critical failure state of slope.
有限元方法凭借其优越性，在扬声器设计中起着越来越重要的作用。
Finite element method has become more and more important in the loudspeaker design because of its advantages.
用整体动力有限元方法分析桩周土及桩间距对桩基地震反应的影响。
The influence of seismic response on piles due to pile-surrounding soil and spacing between adjacent piles was studied with the method of whole dynamic finite element under the seismic condition.
本文采用有限元方法，分析单层对称褶皱作用和一个天然倒转褶皱的变形过程。
Symmetrical folding of a single layer and folding process of an overfold are analyzed by using the finite element method.
采用平面应变有限元方法，对土体运动作用下的被动桩桩土相互作用进行分析。
The pile-soil interaction behavior of passive pile under soft soil movement action was analyzed using plain strain finite element analysis including the plasticity and large strain of soil.
本文应用有限元方法，建立了横流式农用清选风机内部的气体流动数值模拟模型。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
采用有限元方法，建立适于冷弯截面受弯构件性能分析的非线性有限元分析模型。
It is also presented a finite element analytical model suitable for non-linear analysis of HFB flexural members.
应用有限元方法对某多缸内燃机机体在活塞推力作用下的结构动力响应进行了分析。
The structural dynamic response of a certain multi? cylinder internal combustion engine block is analyzed applying finite element method.
用有限元方法计算了铝热离心法制备不锈钢内衬复合钢管过程中的残余热应力分布。
The thermal stress distribution of the stainless steel lined composite steel pipe prepared by centrifugal-SHS process was calculated by the finite element method under thermoelastic assumption.
应用有限元方法分析了在爆炸载荷作用下地下圆形结构与土介质的动力相互作用问题。
In the paper, the problem of interaction between soil media and an underground round structure to explosive loading is studied by FEM.
在有限元方法的数值计算中使用应变空间表述的加-卸载准则和本构方程也是很方便的。
In numerical computation by the finite element method it is also convenient to use the loading-unloading criteria and the constitutive equations formulated in strain space.
基于展开镜结构工作原理，运用有限元方法分析了展开式反射镜单元的裸镜及其支撑方案。
Based on the deployable structure of a mirror and the operation principle, the finite element method was used to analyze the unit naked mirror and some different mirror support schemes.
基于展开镜结构工作原理，运用有限元方法分析了展开式反射镜单元的裸镜及其支撑方案。
Based on the deployable structure of a mirror and the operation principle, the finite element method was used to analyze the unit naked mirror and some different mirror support schemes.
应用推荐