预备场是由有限元法提供的。
The initial guess field is provided by finite element method.
该法还可推广于模拟电荷法及有限元法中。
In addition, the annular elements may be extended into the FEM and the Charge Simulation Method.
比较了有限元法和刚体极限平衡法的优缺点。
It compares the rigid limit equilibrium method with the finite element method.
作为比较，我们用有限元法计算了同一问题。
By comparison, we calculate the same problem by finite element method.
到目前为止，随机有限元法的研究已基本成熟。
Up to now, the research of stochastic finite element is mature basically.
条分法和有限元法是土质边坡稳定分析的主要方法。
Slice method and finite element method are principal methods of soil slope stability analysis.
本文研究用有限元法计算桥梁涡激振动的时程响应。
This paper studies the calculation of vortex-induced responses of Bridges by finite element models.
阐述了用有限元法分析土壤切削问题的研究进展情况。
The up-to-date research progress of the finite element analysis of soil cutting is reviewed.
本文用有限元法计算了基底压力的变化对地基刚度的影响。
The effect of variation of base pressure upon foundation stiffness are calculated by means of finite element methods.
本文采用有限元法分析了板上芯片(COB)的热应力分布。
The finite element method was used for analysis of heat stress in chip on board (COB).
本文采用有限元法分析了板上芯片（COB）的热应力分布。
The finite element method was used for analysis of heat stress in chip on board(COB).
与有限元法和有限差分法相比，该方法具有更高的计算效率。
Compared with Finite Element Method and Finite Difference Method, Boundary Integral Equation Method is computationally more efficient.
运用有限元法对不同工况下平面薄膜反射镜的变形进行了计算。
By using finite element method, the deformations of flat membrane mirror have been calculated.
热弹塑性有限元法和固有应变法是焊接变形预测的两种主要数值方法。
Thermal-elastic-plastic and inherent strains FE methods are two means, which have been applied to the prediction of welding deformation.
采用大变形几何非线性有限元法分析强夯加固机理及其振动对环境影响。
The geometric nonlinear finite element method is used to analyze the impact mechanism of dynamic compaction.
在此基础上引入随机有限元法，对该桁架系统进行结构可靠性初探研究。
On the base of above research, stochastic finite element method was adopted to attempt to analyse reliability of the piezoelectric truss structure.
采用非线性有限元法，对深井巷道围岩应力及变形状态进行了数值计算。
With the non-line finite element method, the numberical value calculation on the stress and deformation of surrounding rock of deep mine roadways has been presented.
利用三维有限元法，模拟了电性各向异性倾斜沉积岩层的双侧向测井响应。
The response of dual laterolog in tilted anisotropic sedimentary formation was simulated with the three-dimensional finite element method.
介绍了有限元法在微型扬声器振膜模态分析以及声响应分析中的一些应用。
Some applications on fem in the micro loudspeaker modal analysis and the acoustic response simulation are introduced.
应用有限元法对辽河滩海油田大斜度定向井抽油杆柱受力进行了三维计算。
Using finite element analysis method, three-dimensional calculation is conducted for force summing on rod in high-inclination well of Liaohe tidal zone oilfield.
同经典的非线性有限元相比，插值系数有限元法是一种高效而经济的算法。
It has the same superconvergence as that classical finite element method, but more economic and efficient.
轧制分离力、轧制力矩以及沿轧辊表面的接触压力也通过有限元法进行评估。
The roll separating force, rolling torque and contact pressure along the surface of the rolls are also evaluated by means of the finite element method.
本文用三维弹塑性有限元法计算了含圆孔对称复合材料层板的层间应力分布。
In this paper, the interlaminar stress distributions of symmetric composite laminates with a hole are predicted by the three-dimensional elastoplastic finite element method.
按测量结果，确定了一个合理的边界条件，用有限元法模拟计算了沿轴场分布。
According to the measured results, a reasonable boundary condition can be set up and then the field distribution can be calculated by using the finite element method.
而本法与有限元法比较，具有程序简单，输入的原始数据少，内存需要量少等优点。
Comparing with finite element method, MWR has some advantages, such as simpler computer program, less input data and less computer storage requirements etc.
方法：用二维有限元法分析阻萌力减少前后下第一磨牙牙周组织内应力分布的变化。
Metbods: a two dimensional finite element model was built up to analyse the stress within the periodontal tissue of the first molar, with a reduced tooth eruption-resistant force.
通过实例计算表明，有限元法在计算精度上有了大大的提高，是一种较为完善的方法。
By some cases the finite element method has improvement at calculating precision by a long way, and it is a kind of comparatively perfect method.
研究了变形体虚功原理的理论和建立方法，并将其用于建立接触问题有限元法计算公式。
The theory of virtual work principles of deformable bodies and the technique to derive their expressions are studied and applied to contact problems to build FEM formulas.
将所得结果与有限元法所得结果进行了比较，发现efg法具有比有限元法更高的精度。
The results obtained by the EFG method are finally compared with those obtained by the finite element method, concluding that the former is of greater accuracy.
将所得结果与有限元法所得结果进行了比较，发现efg法具有比有限元法更高的精度。
The results obtained by the EFG method are finally compared with those obtained by the finite element method, concluding that the former is of greater accuracy.
应用推荐