通过正交试验研究了磨削参数对船用螺旋桨叶片表面粗糙度的影响。
The effects of grinding parameters on surface roughness of Marine propeller blade were studied by using orthogonal test.
本文介绍一种利用离散正交多项式进行物体表面局部曲面拟合以检测物体的特征的方法。
In this paper a method of using discrete orthogonal polynomials to fitting local surface of object in order to detect characteristics of range images is presented.
本课题首先根据转谷氨酰胺酶修饰四种蛋白，测定其在不同条件下蛋白表面疏水性的变化趋势，并进行单因素及正交实验。
Four kinds of soy protein was modified by Transglutaminase, surface hydrophobicity of protein was measured under different conditions, and single factor and orthogonal experiments was determined.
在动力学研究中，建立了西索米星在D113（皖）树脂上的吸附表面有效扩散模型，利用正交配置法求解动力学模型。
The surface diffusion model were established to simulate the adsorption process of sisomicin on the exchange resin D113. The model was solved by orthogonal collocation method.
经典特征模理论提供了一套在导体表面形成加权正交系的特征电流，在无穷远球面上形成正交系的特征场。
The mode currents form a weighted orthogonal set over the conductor surface, and the mode fields form an orthogonal set over the sphere at infinity.
本文用正交设计法研究了臭氧气体对炭纤维表面的连续氧化处理的最佳工艺参数。
In this paper was studied optimum technology parameter of the oxidation treatment in succession of the ozone gas against the surface of carbon fibers with the method of rhombic design.
在已加工表面粗糙度研究领域引入回归正交分析，采用多元二次回归正交设计得到了数控车削参数与已加工表面粗糙度的回归预报模型。
At realm of surface roughness of machined surface, forecast mathematical model is set up by using quadratic regression orthogonal design between NC turning parameter and machined surface.
对受平面应力场的作用的正交异性板的表面应力，应变进行了实测研究。并对测试误差进行了分析。
The surface strain of the orthogonal plate is measured under the action of the planar stress field, and the error is analyzed.
为了使薄板表面的温度均匀分布，应用正交试验法对感应加热器的结构进行了优化。
To achieve a completely uniform temperature distribution on the thin strip surface, orthogonal experiment is used for optimizing the heater structure.
以镀层表面形貌和显微硬度为考核指标，采用正交试验法优选了脉冲镀银参数，采用优选的脉冲参数电镀与直流电镀的银镀层作了比较。
Acoording to the surface appearance and the microhardness of coating, the parameters of silver plating with pulse current are optimized by the orthorhombic experiment.
通过正交试验证明加工时间是影响去除量的主要因素，而磨料粒度对表面粗糙度影响较大。
Orthogonal experiment shows that the time is the main factor of removal rate and abrasive granularity is the crucial factor of surface roughness.
以此为基础，在国产CD 6140a型车床上对C3602铅黄铜进行了正交切削试验，分析了各因素水平对工件表面粗糙度的影响。
On this basis, the orthogonal test of leaded brass C3602 was made on the domestic lathe CD6140A and the influence of various factors and levels on surface roughness was analyzed.
通过正交原理设计试验及优化方法寻找最佳参数，对陶瓷表面化学镀工艺进行了研究。
This paper, with orthogonality designing the experiment and finding the parameters through optimizing method as well, mainly discusses the chemical plating technology on the ceramics.
研究了磷酸单酯反应型表面活性剂的合成工艺，通过正交设计实验确定了合成的最佳工艺条件。
The synthesis technology for mono-alkyl phosphate reactive surfactants was studied and the (optimum) conditions of preparation were determined on the basis of experimental results.
方法：以滴丸的硬度、外观、表面光滑度、水飞蓟宾的含量为评价指标，采用正交试验法研究滴丸成型的最佳工艺条件。
Methods: the optimum preparation condition were researched by orthogonal test according to the hardness of drop pills, appearance, smooth and the content of silybin.
通过正交实验优化了十二烷基葡萄糖苷（APG）的合成条件，测定了APG的表面化学性能，并探讨了APG在碱性介质中对铝的缓蚀作用．。
The conditions of synthesis of APG were optimized through orthogonal experiment. APG's surficial chemical properties were measured. APG's mitigatory effect on Aluminum was studied in base medium.
该方法利用半球谐基函数对入射光线正交化，利用两个半球上的笛卡儿积来定义物体表面的双向反射率分布函数。
This method USES the hemispherical harmonics basis to represent incoming radiance and USES the Cartesian product of two hemispheres to define the BRDFs.
运用两步法与正交试验得出磺酸系双子表面活性剂合成的优化条件。
By applying two-step method and orthogonal experiment method, the optimum operation condition for synthesizing sulfonic acid series Gemini surfactant was obtained.
同时用正交试验法研究了新型陶瓷刀具加工时的切削用量对表面质量的影响，初步得到了切削用量的优化方案。
With orthogonal experiment, the effect of the cutting parameters on the surface quality during uew-model ceramic tools cutting is researched, and a preliminary optimal pr...
利用正交试验方法研究了铸钢件的无熔剂表面合金化。
The surface alloying of steel castings without fusing agent was studied by means of orthogonal experiment design.
通过正交实验得出最佳反应条件，制得的超细氧化锌粉料经组分分析、结构分析表明，其粒径、纯度、比表面积和晶型均符合相关标准。
The powders were tested by chemical composition analysis and construction analysis. The size of the powder, the purity and the specific area were all better than those of standard.
根据正交试验，通过收率、比表面积及透射电镜表征分析得到了最佳纯化条件，以保证产品质量，降低制备成本。
Choice the best condition though the orthogonal experiments and analyzed of purification rate, BET data and TEM image. The quality was ensured and the cost of production was decreased.
实验结果表明，与正交投影模型相比，透视投影模型的三维表面测量效果显著提高。
The experimental result shows that the perspective model is quite suitable for the 3-d surface measurement, comparing with the orthographic projection model.
在优选实施例中，这些场分别正交于和平行于皮肤表面，并以时间上交替的顺序施加。
In a preferred embodiment, these field are orthogonal and parallel to the skin surface, respectively, and applied in a temporally alternating sequence.
以陶粒的比表面积和松散容重为考核指标，通过正交试验，确定了陶粒的最佳制作工艺参数。
The optimal production parameters were confirmed through orthogonal test by using specific surface area and loose bulk density as assessment indicators.
通过正交实验，得出在不同的刷镀工艺参数组合下镀层的耐磨性和耐腐蚀性，经过分析得出铜网表面最优刷镀工艺参数。
Based on orthogonal experiment, the wear ability and corrode-resisting of brush-plating coat under different brush-plating technology parameter combination are obtained.
通过正交实验，得出在不同的刷镀工艺参数组合下镀层的耐磨性和耐腐蚀性，经过分析得出铜网表面最优刷镀工艺参数。
Based on orthogonal experiment, the wear ability and corrode-resisting of brush-plating coat under different brush-plating technology parameter combination are obtained.
应用推荐