浇口设计要设定浇口的位置和形状。
The gate design will set the location and the shape of the gates.
浇口的速度是否影响模具的温度？
Does the gate velocity of the metal influence the die temperature?
浇口切除后只留下细小痕迹。
提出了一个分析浇口位置对熔接痕影响的方法。
This paper presents a method to explore the implications of gate location on weld lines.
对透明塑料罩壳注射模结构，采用点浇口进料。
For the injection mold structure of transparent plastic cover shell, point gate feeding is adopted.
热流系统的作用就是把材料送到模内的每一浇口。
The function of the Heat flow system is to sent materials to sprue gate.
浇道和浇口系统的设计必须能减少紊流的可能性。
The runner and gate system must be designed to reduce the possibility of turbulence.
浇注系统的平衡最终通过调整浇口的尺寸来达到。
Balance in the feed system is ultimately attained by adjustment of gate size.
注意在这个过程中柱销和潜伏式浇口之间被剪断。
Note that the peg is' sheared 'from the subsurface gate in tile process.
对喷嘴选择，直、横浇道及浇口设计等进行了分析。
Make analyses of selecting nozzle and designing sprue runner and gate and etc.
浇口：外部方向(铰链对面)。流向须爬过衬垫侧。
GATE: external direct (opposite side of the hinge). Flow direction should climb over the gasket side.
分析了浇口尺寸的重要性，指出浇口尺寸要容易修正。
It analyzed the importance of gate dimension and pointed out that the gate size must be easy to revise.
使用了倾斜浇口套，详细介绍了该模具的注射工艺条件。
Slanting gate cover is used, and the injection process conditions of this mold are introduced in details.
保压时间的确定以浇口冷凝为依据。通过产品称重来确定。
Holding time is determined by the solidification time of the gate. We decide it according to the weight.
针对一种圆筒形制品，设计了一种结构简单的点浇口成型模具。
For a kind of cylindrical plastic product, it designed one type of pin-point gate mould with simple structure.
预测可能存在的气泡位置及锁模力的大小，确定最佳浇口位置。
In order to obtain the best gate location addition, the position of air bubble and the clamp force were forecasted.
产品是平板件，很容易变形。我们需要找到一个合适的浇口位置；
The part is flat, easy to be deformed. We need to find a suitable gate location.
预测可能存在的熔接痕位置及锁模力的大小，确定最佳浇口位置。
In order to obtain the best gate location addition, the position of weld lines and the clamp force were forecasted.
成形品是由流入融化树脂的浇口、导入模槽的流道与产品部份所构成。
Molded into the melted resin from the gate, into the flow channel module slot part of the composition of the product.
针对一种圆筒形制品，设计了一种结构简单的点浇口成型模具结构。
In terms of a circular plastic product, a simple pin point gate mould was designed.
结果表明，正确地设置内浇口对减少摩托车箱体的缺陷有很大的作用。
The results prove that correct runner plays an important role in the decreasing of boxes'defects.
采用面向对象的数据库技术，建造了浇口类型与浇口位置咨询专家系统。
A consultation expert system about the gate's type and location is built by the method of Object-Oriented database technology.
没有充分了解客户对此零件的所有要求就不可能设计出良好的浇口体系。
It is not possible to design a good gating system without knowing as intimately as possible all the customer requirements for this part.
绝大部分汽车蓄电池板栅尺需要在顶部浇口部分和模具的中心冷却就可以。
On most automotive battery grids, cooling is required in the top gate area and in the center of the mold only.
在控制过程中融入了操作经验和专家知识，从而保证了浇口杯液位的稳定。
In control procedure operation experience and expert knowledge are merged, thus the level of the runner cup has been kept stable.
利用流动模拟结果，在流道布置及浇口尺寸确定后对分流道尺寸进行优化。
After the runner layout and gate size were decided, it could adjust runner size iteratively based on the of flow simulation results.
环形浇口。这种浇口的功能是和前一节讨论的浇口相同的，且有相同的注释。
The function of this gate is identical to that discussed in the previous section and the same comments apply.
介绍了推杆自动切断浇口机构在热固性塑料注射模中的具体结构、 模具工作过程。
The structure, operating principle and action of mechanism of automatic sprue cutting by ejector pin in thermosetting plastics injection mould was described.
预测可能存在的气泡、熔接痕的位置，确定最佳浇口位置，并在此基础上设计模具。
In order to obtain the best gate location addition, the position of air bubbles and weld lines were forecasted.
算例表明所提出的方法适用于注塑模浇口位置优化，并且有较好的计算效率和精度。
Numerical examples show that the method is suitable for designing optimal gate location and gives high efficiency and accuracy.
应用推荐