用黏土模具来浇铸青铜塑像。
对材料和浇铸工艺应作适当选择。
The materials and casting procedure should be chosen properly.
采用可达到要求厚度的浇铸参数。
最近他们已学会了浇铸轻型水泥船。
匹配上下铸模，做好浇铸金属的准备。
从而得到最合适的浇铸参数。
浇铸阿马·托比浇铸梯恩梯较易爆炸。
Amatols in the form of cast charges detonate more readily than TNT in the same form.
塑料衬垫和混凝土被一个步骤浇铸完成。
The plastic liner is casted together with the concrete in one step.
如果你是驱车前往，你可以从水泥浇铸的通村公路进入。
If you are driven to, you can cast from the cement through the village road into the.
生产太阳能电池的第一步是把硅浇铸成硅锭，之后切为晶片。
The first step in making solar cells is to shape silicon into ingots and then slice it into wafers.
应分析精度对模型尺寸的要求，采用了精密浇铸的方法制作模型。
According to the accuracy requirements of the analysis with the model dimension, we use the precision casting method to make the models.
隧道加深一米需要1天的时间，而浇铸混凝土墙壁和拱顶需要3天多的时间。
The tunnel deepening for 1 meter takes one day. Three days more - for concrete casting of the walls and the arch.
推进剂的浇铸是通过从浇铸锅到发动机壳体的“插管”来进行的。
Casting the propellant is done through the "bayonets" from the casting pot to the case.
液体的浇铸聚氨酯材料可机加工，并在过程中精确控制配方和温度。
Liquid castable polyurethane materials can be machine processed and dispensed with precise control over ingredient proportions and temperature levels.
这种混凝土浇铸在高处，灵活有时后张，产生光滑、一致的大块表层。
Cast on big heights, flexible, sometimes post tension, this type of concrete gives this smooth, unified, massive skin.
研究表明，电磁制动的控制效果与浇铸速度、水口角度和磁通量密度有关。
The research showed that the control result of electromagnetic brake was related to casting speed, mould Angle and magnetic flux density.
保持节能计划的灵活性。要记住，任何成功的节能计划不是象浇铸混凝土一样！
Maintain flexibility in your energy plan. Remember successful energy plans are NOT cast in concrete!
水池中间是两个供水生植物生长的浇铸的罐，并提供阴凉和来自太阳的舒适感。
Located in the center of it are two concrete cast POTS for water plants to grow and provide shade and comfort from the sun.
我希望能与身边的孩子一样，与邻居和学校的孩子一样，由同一个模子浇铸而成。
I wanted to be cut to the pattern of the kids around me, in the neighborhood, at school.
单价包括在开展任何工作之前进行的制定确切的穿透定位、支撑浇铸之类的费用。
UNIT PRICES include fees like establishing the. Exact positioning of penetrations, cast in supports and the like before any work is carried out.
单价包括在开展任何工作之前进行的制定确切的穿透定位、支撑浇铸之类的费用。
UNIT PRICES include for establishing the. Exact positioning of penetrations, cast in supports and the like before any work is carried out.
聚氨酯材料这种特殊的特性，使其可被浇铸成客户需求的任何形状或大小的产品。
This exceptional characteristic of polyurethane permits custom moulds of virtually any shape or size.
缸体是由灰铸铁或含有镍或铬的合金铸铁整体铸造而成的。有的缸体由铝浇铸而成。
The block is cast in one piece from gray iron or iron alloyed with other metals, such as nickel or chromium. Some blocks are cast from aluminum.
根据该条例，安全信息必须永久性地浇铸在轮胎上，而不得写在可移动或去除的标签上。
Under the regulation, safety information had to be permanently molded into the tire, rather than disclosed on a removable label.
扶手由浇铸聚氨酯泡沫制成，带有完整的涂层以便于清洗，能够承受乙醇或漂白的消毒。
The padded arm is constructed of molded urethane foam with an integral coating that cleans easily and withstands disinfection with alcohol or bleach.
在绝热条件下通过活化阴离子共聚制备十二内酰胺改性浇铸尼龙，对其力学性能进行了研究。
Cast nylon modified with laurolactam was prepared by activated anionic copolymerization under the adiabatic condition. Its mechanical properties were studied.
利用铸型尼龙（MC尼龙）静态浇铸的原理，通过阴离子聚合制得了玻纤、粉煤灰增强MC尼龙。
MC nylon reinforced by glass fiber and flyash was prepared based on the principle of static casting of MC nylon.
利用铸型尼龙（MC尼龙）静态浇铸的原理，通过阴离子聚合制得了玻纤、粉煤灰增强MC尼龙。
MC nylon reinforced by glass fiber and flyash was prepared based on the principle of static casting of MC nylon.
应用推荐