介绍了一种功能薄膜微细图形制备新方法—化学修饰溶胶-凝胶法。
A new way called chemically modified sol-gel method for preparing patterned functional films is introduced.
结果表明，溶胶-凝胶法红磷微胶囊整理的棉织物具有良好的阻燃效果和耐久性，但白度和断裂强力有一定程度的下降。
Results showed that the treated cotton fabric had good flame retardancy and durability, but its whiteness and tensile strength decreased to some extent.
用溶胶-凝胶法和浸渍-提拉法工艺，在玻璃表面上制备了均匀、透明的钇离子(Y3 +)掺杂二氧化钛纳米薄膜。
Homogeneous and transparent thin nanostructured titania films doped by Y3 + were prepared on glass substrates by sol gel processing and dip coating technique.
应用溶胶—凝胶法的基本原理，进行了丝绒在酸性染料染色中的固色研究。
The fixation of acid dyes on velour was studied according to the basic principle of sol-gel.
并对溶胶凝胶法在橡胶增强、光学仪器、功能化涂层以及其它领域中的应用进行了具体的讨论。
We discussed in detail on the usage of sol-gel process in rubber reinforcing, optical materials, functional coatings and other field.
以人发为生物模板，用溶胶-凝胶法对人发的表皮结构进行了复制。
The structure of hair was replicated via a sol-gel process using human hair as the template.
采用以无机盐为基础的新型溶胶凝胶法合成了NA SICON 快离子导体材料。
Solid electrolyte NASICON (sodium super ionic conductor) was synthesized by new sol gel method in which inorganic salts were used as raw material.
溶胶—凝胶法是一种在较低温度下即可得到希望的化合物的新方法。
Sol Gel method is a new method with which desired chemical compounds can be obtained at lower temperature.
采用溶胶-凝胶法，按化学配比将锂元素掺入铬酸镧中制得粉末。
Li-doped lanthanum chromite powders in stoichiometric proportions were prepared by sol-gel process.
目的：探讨利用溶胶凝胶法进行纳米硅涂层表面改性对玻璃渗透氧化铝陶瓷粘结强度的影响。
Objective: Aim of this study was to evaluate the effect of silica coating with sol-gel process on bonding strength between glass infiltrated alumina ceramic and resin luting cement.
采用溶胶-凝胶法在玻璃表面制备出透明的憎水性纳米复合薄膜。
Transparent nano composite film on the surface of glass of hydrophobic property is prepared with sol-gel processing.
对该玻璃表面黑化，采用了离子交换氢还原法、玻璃中掺杂着色离子法、表面涂覆法以及溶胶凝胶法。
The glass surface is blackened by use of ion exchange hydrogen reduction method, doping coloration ion method, surface coating method and collosol-gelling method.
采用化学处理、溶胶-凝胶法，制备了金属多孔催化载体材料。
Porous metal catalytic carrier was prepared with chemical treatment and sol-gel technology.
利用溶胶-凝胶法合成了固载离子液体的介孔分子筛。
The mesoporous molecular sieves supported with ionic liquid were prepared by sol-gel method.
经过试验分析，得出了玻璃表面涂覆法和溶胶凝胶法是使玻璃表面黑化的可行途径。
It is found that the glass surface coating method and the collosol-gelling method are feasible for the blackening of glass surface.
与其它方法相比，溶胶-凝胶法有着极大的优势。
Compared with other methods, the sol-gel method has great advantage.
目的探讨溶胶-凝胶沉积钛法中热处理过程对烤瓷用镍铬合金表面钛涂层的影响。
Objective To study the effect of heat treatment with sol-gel method on the surface of Ni-Cr alloy for PFM after ti coating.
实验结果表明：利用柠檬酸盐溶胶凝胶法可以合成颗粒粒径在30 ~ 70纳米的无铅ptc陶瓷粉体。
The results showed that the lead-free PTC composites which had the size distribution of 30 ~ 70nm could be prepared by citrate sol-gel method.
应用化学共沉淀法和溶胶-凝胶法制备了钇铁石榴石(YIG)多晶粉体。
The powders of YIG crystal have been prepared by coprecipitation method and sol-gel (method).
以常规试剂为原料，采用溶胶-凝胶法合成了NASICON固体电解质材料，并以该合成材料为基础，制备了小型固体电解质型CO2传感器。
NASICON was synthesized by using normal reagents as raw material and sol-gel process. Based on the resulted material, the solid electrolyte CO2 sensor was prepared.
综述了溶胶-凝胶自燃烧法在制备材料中的应用现状。
And it is summarizes the present situation of preparing materials by auto-combustion of citrate gels.
陶瓷薄膜的制备技术多种多样，如物理气相沉积、化学气相沉积、高温烧结和“溶胶-凝胶”法等。
There are many techniques for fabricating ceramic films such as PVD, CVD, high-temperature sintering and sol-gel method.
本论文采用溶胶-凝胶法、浸渍法和涂抹法制备了碳烟氧化催化剂。
In this paper, we adopted the sol-gel, dipping and smear methods to prepare the soot oxidation catalysts.
首先采用溶胶-凝胶法制备镍催化剂，在此基础上用化学气相沉积法高产率地制备了碳纳米管。
The catalyst was first produced by sol-gel method and the carbon nanotubes were high yield synthesized by the catalytic chemical vapor decomposition method.
探讨了加入柠檬酸对溶胶-凝胶法合成铬锡红色料的影响。
In this paper, the influence of chrome-tin pink pigment synthesized are mainly researched by sol-gel method with citric acid.
运用浸渍法、溶胶凝胶法和表面包覆法制备了多种的备选固体催化剂。
For the synthesis of MEC, the novel heterogeneous catalysts have been prepared by dipping, sol-gel and surface-coating technique.
本发明采用的方法为溶胶-凝胶和真空冷冻干燥法。
The method of the invention comprises a sol-gel process and a vacuum freezing drying process.
为了获得高性能的微波吸收材料，釆用柠檬酸盐溶胶-凝胶法来制备掺杂有金属离子的纳米六角晶型铁氧体。
This study adopted the citrate Sol-gel method to prepare the nanophase hexagonal ferrite with doping metal to get high performance microwave materials.
为了获得高性能的微波吸收材料，釆用柠檬酸盐溶胶-凝胶法来制备掺杂有金属离子的纳米六角晶型铁氧体。
This study adopted the citrate Sol-gel method to prepare the nanophase hexagonal ferrite with doping metal to get high performance microwave materials.
应用推荐