研究了PVAL牌号、成型工艺、用量及水分对共混体系热塑性加工性能和拉伸性能的影响。
The effects of PVAL type, processing technology, PVAL content and water content on the thermoplastic process-ability and the tensile property were studied.
提出了等值线的新概念，论述了等值线在确定温热塑性加工规范方面的意义并进一步明确了研究应用的方向。
The importance of isopleth in determination of medium-temperature plastic working standard is discussed and the application trends of this investigation is further clarified.
一般而言，大多数热塑性材料具有较高的抗冲击强度、耐腐蚀性以及良好流动性使其容易加工而适于复杂成型设计。
In general, most of the thermoplastic materials offer high impact strength, corrosion resistance, and easy processing with good flow characteristics for molding complex designs.
自1958年以来，AMUT公司一直致力于生产热塑性塑料加工专用的挤出设备。
AMUT has been devoted to the manufacture of extrusion plants for processing thermoplastic materials even since 1958.
因此，热塑性精成形技术己成为机械零件加工极为重要又极有前途的新方法之一。
So thermo-plastic precision forming technology has developed into one of the very important and promising new method for mechanical parts machining.
通过对多种材料匹配的分析，分别选择热固性的环氧树脂和热塑性可机加工蜡作为工件材料和支撑材料。
Through analysis of various of match materials, hot-solidified epoxy colophony and thermoplastic and machinable wax are chosen as part material and support material.
热塑性工程塑料包装箱由于设计和加工工艺不当，在各种使用环境中易导致产品应力集中而开裂。
In some of usage environment, the engineering thermoplastics packaging case can cause stress concentration and cracking because of the bad design and processing technology.
综述了近年来热固、热塑性聚合物反应加工过程中的化学流变学模拟进展。
In this paper, the advances in chemorheological modeling of reactive processing for thermoplastics and thermosets were reviewed.
介绍了几种纤维增强热塑性塑料的回收方法及其影响回收加工后塑料力学性能的因素。
The recycling methods of the fiber-reinforced thermoplastics and the effect of recycling on the mechanical properties of reused materials are introduced.
聚乳酸是一种热塑性聚合物，具有良好的加工及应用性能。
As a thermoplastic polymer with good processability and application performance, PLA will be used very widely.
采用吸氧量法和热烘箱老化法对新型抗氧剂hd在热塑性弹性体s BS加工中的应用进行了研究。
A study was made on the application of new antioxidant HD to the SBS processing by oxygen adsorption and heat oven aging method.
介绍了一种利用激光作为热源使金属板料在无模具下发生热塑性变形的新的成形加工方法。
A new forming process which can make sheet metals thermoplastic deformation without dies through the use of a laser as a heat source was described.
木材经过化学改性可制备成易于加工且可生物降解的热塑性木材；
Woodiness materials is prepared to thermoplastic through chemical modification, which can easy machining and has biodegradability;
PELLETHANTPU热塑性聚氨酯弹性体有包括软、硬材质在内的丰富品种，并且可以采用从注塑、挤塑和吹塑等多种工艺进行加工。
PELLETHAN TPU thermoplastic polyurethane elastomers range from hard to soft and can be fabricated by a variety of methods from injection molding to extrusion to blow molding.
注射成型是热塑性塑料和一部分热固性塑料最主要的成型加工方法。
Injection molding is the mostly used processing technology for all thermoplastic materials and part of thermoset...
介绍了热塑性聚酯弹性体的合成、性能、加工和应用。
The synthesis, property, processing and application of thermoplastic polyester elastomer (TPEE) were introduced in this paper.
新型热塑性弹性体sebs具有生物相容性优良、无毒、环保及易加工等特点，正是用于制作输液器软管材料的极佳选择。
New thermoplastic elastic SEBS has the excellent properties of bio-availability, non-toxic, being green and easy to process. These excellent features make it good for medical infusion hose material.
热固性橡胶之性能，热塑性塑料之加工方法。
Performance of thermoset rubber but processed like thermoplastic.
这种档次的SantopreneTPV是剪切速率依赖型产品，可在常规热塑性注塑，挤出，吹塑，热成型或真空成型设备上加工。
This grade of Santoprene TPV is shear-dependent and can be processed on conventional thermoplastics equipment for injection molding, extrusion, blow molding, thermoforming or vacuum forming.
考察了高聚合度聚氯乙烯热塑性弹性体(H PV C - TPE)的基本力学性能、加工流变性能。
The fundamental mechanical property and processing rheological behaviour of HPVC TPE were investigated.
本文对热塑性复合材料用预浸料的结构及其在复合材料成型加工中的浸渍性能进行分析。
In this paper the structures and matrix impregnating behaviours during composites forming of intermediate materials by fiber mixing for thermoplastic composites were investigated.
它可以处理许多常规的热塑性塑料加工技术一样注塑和挤出。
It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.
这种高阻隔材料价格低廉，热塑性好，热加工性能优异，可重复使用。
The high barrier material is low in price, fine in thermoplasticity and excellent in hot working property and can be reused.
热塑性弹性体(TPE)具有优异的机械性能和可重复加工性能，已经广泛应用于汽车工业、电子等产品中，并一直保持良好的增长势头。
Thermoplastic elastomers (TPE) are widely used in automobile and electronic industry and are keeping the ever-increasing momentum for their superior mechanical properties and reprocessing ability.
它可以像许多传统的注塑成型和挤出的热塑性塑料加工技术处理。
It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.
本文回顾了热塑性树脂基纺织结构型复合材料的加工方法。
This paper reviews the manufacturing methods of textile structural thermoplastic composites.
含氮不锈钢的高温热塑性主要受热加工温度、钢中硫含量、氮含量等因素影响。
The hot ductility is influenced by hot worked temperature, sulfur content, nitrogen content and so on.
聚醚酰亚胺（PEI）是一种新型热塑性聚酰亚胺，具有很好的成型加工性能，可用一般热塑性塑料成型加工工艺和设备制造多种制品。
Polyether-imide (PEI)is a new amorphous thermoplastic polyimide. It has good processing behavior with typical thermoplastic processing and forming equipment to manufacture a lot of products.
聚醚酰亚胺（PEI）是一种新型热塑性聚酰亚胺，具有很好的成型加工性能，可用一般热塑性塑料成型加工工艺和设备制造多种制品。
Polyether-imide (PEI)is a new amorphous thermoplastic polyimide. It has good processing behavior with typical thermoplastic processing and forming equipment to manufacture a lot of products.
应用推荐