这些方法和系统适用于各种用于对热处理钢例如剃刀刀片钢着色的氧化工艺。
These methods and systems are suitable for use in various oxidation processes for the coloration of heat treated steel, for example razor blade steel.
现在它已能生产高强度结构钢、弹簧钢、工具钢、可热处理钢、耐磨钢、硅钢和不锈钢。
It is currently used to produce high strength structural steel, spring steel, tool steel, heat treat steel, abrasion steel, silicon steel and stainless steel.
模具在生产中的使用寿命与模具用钢的性能水平、材质优劣、使用合理与否以及热处理工艺等等都有着密切的联系。
The used life of mould in production is closely relative to the feature level, material quality , fit use or not and the technics of heat treatment and so on .
含碳量变化的钢具有不同的临界温度，因此需要特殊的热处理。
A steel with varying carbon content and, consequently, different critical temperatures requires a special heat treatment.
钢的热处理工序包括硬化、回火、退火和表面硬化。
The procedures of heat treatment of steel include hardening tempering annealing and case hardening.
钢的热处理操作主要有三种，即：淬火，回火和退火。
There are three main operations in the heat treatment of steel: hardening, tempering and annealing.
钢的热处理操作主要有三种，即：淬火、回火和退火。
There are three main operations in the heat treatment of steel: hardening tempering and annealing.
建议对这种钢在渗氮前先机加工和热处理，因为渗氮后没有剥落并不需要更多的加工。
It is recommended that these steels be machined and heat-treated before nitriding, because there is no scale or further work necessary after this process.
钢的焊接CCT图，是正确选择焊接材料、确定最佳焊接工艺、消除焊接裂纹、制订焊后热处理规范的重要依据。
Welding CCT diagrams of steels are the basic to select welding material, determine the optimum welding technology, relieve welding cracks and lay down standard of past heat treatment.
本文结合内耗机理及部分实践提出了钢弹性体材料处理、热处理工艺对传感器滞后误差的影响分析。
This text analysed the influence of steel elastomer material, heat treatment craft to load cell lag error combining internal friction mechanism and practical experience.
采用焊接热模拟技术和显微分析方法，研究了回火焊道热处理对X80级管线钢焊接热影响区韧性的影响规律。
The effects of tempering weld-pass treatment on toughness of HAZ of X80 pipeline steel were studied by the technique of welding thermal simulation and the method of microscope analysis.
本文介绍国产A508-3钢在不同的淬火、回火和退火条件下的热处理实验的某些结果。
This paper presents some results of heat treatment experiments of A508-3 steel at different quenching, tempering and annealing conditions.
提出适合新型贝氏体钢的最佳热处理工艺。
The optimum heat treatment process is proposed for bainite steel.
采用AGA—782热像仪实际测定钢激光热处理表面温度场。
The actual surface temperature field during laser heat treatment has been measured by thermovision type AGA 782.
利用冲击疲劳试验，研究了稀土变质及热处理对低铬半钢抗冲击疲劳性能的影响。
The effect of re modification and heat treatment on impact fatigue property of low chromium cast semi steel was studied by means of impact fatigue test.
钢的碳氮共渗热处理工艺具有共渗温度低、可直接淬火等特点。
The heat treatment technology of carbo - nitriding of steel has the characteristic of lower treatment temperature and direct quenching.
钢的热处理有多少种操作方法？
How many operations are there in the heat treatment of steel?
由于渗氮钢的合金比例，它们比普通钢更强，也容易热处理。
Nitriding steels, by virtue of their alloying content, are stronger than ordinary steels and respond readily to heat treatment.
通过热处理可提高轨钢的强度及硬度，接触疲劳强度也随之提高。
Heat treatment can increase the tensile strength and the hardness of the rail steel, and the contact fatigue strength is also increased.
研究热处理对新型贝氏体钢的组织与力学性能的影响。
Influence of different heat treatment process on microstructure and properties of bainite steel has been investigated.
最后对工具钢合金化及热处理质量控制问题进行了介绍。
Finally on tool steel alloying and heat treatment quality control problems were introduced.
因此，对于塑料模具钢的制造工艺，特别是热处理工艺也是大不相同的。
Therefore, plastic mold steel manufacturing processes, in particular the heat treatment processes are different.
含钴高速钢采用特定的热处理工艺处理，可充分发挥材料的潜在性能，显著提高其强韧性。
Special heat treating process will bring latent properties of high speed steel with Co into full play and obviously improve its strength and toughness.
H 13钢芯棒毛坯在调质热处理后的校正工序中发生断裂，宏观断裂面出现萘状断口。
After quenching and tempering, material H13 steel core bar was broken during alignment There are naphthalene fractures on macroscopical fractures surface.
主要供化工、造船机械等工业焊接工艺作焊条预热、干燥或作不锈钢工作的热处理之用。
It is mainly for preheating, drying of welding process in the industries such as chemical industry, shipbuilding machinery etc, or the heat treatment of stainless steel work.
制备表面抗菌不锈钢的方法有化学热处理、磁控溅射、离子注入、溶胶-凝胶和化学沉积。
There are various methods to obtain antibacterial surface on stainless steels, such as chemical heat treatment, magnetron sputtering, ion implantation, Sol-Gel, and chemical deposition.
在通常所说的退火的热处理过程中，我们把钢加热到临界温度以上，再让它慢慢冷却。
In the process known AS annealing, we heat the steel above the critical temperature and permit it to cool very slowly.
在通常所说的退火的热处理过程中，我们把钢加热到临界温度以上，再让它慢慢冷却。
In the process known AS annealing, we heat the steel above the critical temperature and permit it to cool very slowly.
应用推荐