本文所研究的陶瓷复合装甲由铝合金、玻璃纤维增强复合材料(玻璃钢)、抗弹陶瓷三种材料复合而成。
The ceramic composite armor related to this thesis is composed of aluminum alloy, glass fiber reinforced composite and engineering ceramics.
改进了以浆液料作为旋转成型的物料，用于制备短玻璃纤维增强聚丙烯复合材料的新工艺。
An aqueous slurry was developed as a sort of raw materials in rotational moulding for the preparation of short glass fiber reinforced polypropylene composites.
综述玻璃纤维增强热塑性树脂基复合材料及其界面优化的国内外研究现状。
This paper reviews the recent research achievement of glass fiber reinforced thermoplastic resin-matrix composites at home and abroad.
高强度玻璃纤维是高级复合材料的重要增强材料之一。
High strength glass fiber is one of the more important reinforcing material of advanced composites.
本文考察了玻璃纤维增强聚氯乙烯复合材料（GF／PVC）中玻璃纤维的表面处理及加入量对力学性能的影响。
The effects of surface treatment and weight loading of glass-fiberon mechanical and thermol properties of fiber reinforced PVC composite (GF/RPVC)are presented in this paper.
叙述了用玻璃纤维增强的环氧树脂复合材料等来复制古代大型天文简仪龙柱的工艺试验和制作过程。
This paper describes the technological test and the making process of the Abridged Armilla with the ancient large astronomy in epoxy-glassfiber reinforced composites, etc.
文章利用玻璃纤维编织一种新型双轴向增强纬编间隔织物，并制作了该种结构的织物增强复合材料。
A new kind of biaxial spacer weft-knitted fabric was knitted using glass fiber, and then its reinforced composite was manufactured.
研究结果表明，将光固化技术用于制备玻璃纤维增强树脂基复合材料是完全可能的；
The result showed that it is possible to prepare glass fiber reinforced composites with light-cured technology.
为了满足传感器的使用要求，本文以玻璃纤维增强环氧树脂基复合材料薄膜作为传感器应变片的基底材料。
A study of milled glass fiber reinforced composites used as the strain gage backing material is present in this paper, which made it suitable more well for the demands of load cell.
以abs树脂及其中间体为主要原料，利用短玻璃纤维对其进行增强改性。实验从配方研究入手，着重探讨了玻璃纤维和基体树脂对复合材料性能的影响。
ABS resin and its intermediate was reinforced by short glass fibers. Starting with recipe research, influences of glass fibers and matrix resin on the composite were discussed.
[4]郑吉良，孙勇，彭明军。单向玻璃纤维增强树脂基体复合材料拉伸失效机理[J]。航空材料学报，2015,35 (4)：45 -54。
ZHENG J l, SUN y, PENG m J. Tensile failure mechanism for resin matrix composites reinforced by unidirectional glass fiber [J]. Journal of Aeronautical Materials, 2015, 35 (4) : 45-54.
再以预处理后的新酚树脂为基体、乙炔炭黑为导电填料、玻璃纤维织物为增强材料制备了导电复合材料；
The modified xylok resin was subsequently blended with glass cloth and acetylene black to generate a new conductive composite.
研制高性能的玻璃纤维增强聚丙烯复合材料的关键是提高非极性的聚丙烯和极性的玻璃纤维的界面粘结强度。
The key point to prepare glass fiber re-enforced polypropylene composite(PP/GF)is to improve the interfacial strength of non-polar polypropylene and polar glass fiber.
本文综述了玻璃纤维增强聚丙烯复合材料结晶情况，界面横晶的产生，横晶对材料力学性能的影响以及控制方法。
In this study, the occurrence of the interfacial transcrystallization towards composites 'mechanical performance and the controlling method of the transcrystallization are investigated.
结果表明 ，高硅氧玻璃纤维布增强聚四氟乙烯复合材料在上述因素影响下 ，其介电常数在 2 .90～ 3.30的范围内变化 ，其中环境湿度是主要的影响因素。
The results showed that its dielectric constant changes in the scope of 2.90 to 3.30 under the influence of the factors mentioned above, among which the environmental humidity is a dominant one.
采用聚烯烃增韧与玻璃纤维共混，在保持复合材料拉伸强度和模量的同时，较大地提高了冲击强度，获得了综合力学性能优异的纤维增强聚酰胺材料。
Composites with well general mechanical properties, such as unchanged tensile strength and modulus and higher impact strength were obtained by adopting technologies of polyolefin and glass-fiber.
采用聚烯烃增韧与玻璃纤维共混，在保持复合材料拉伸强度和模量的同时，较大地提高了冲击强度，获得了综合力学性能优异的纤维增强聚酰胺材料。
Composites with well general mechanical properties, such as unchanged tensile strength and modulus and higher impact strength were obtained by adopting technologies of polyolefin and glass-fiber.
应用推荐