表面可以改变您的创作之前，通过研磨，喷砂，抛光，抛丸或具有覆盖。
The surface can be changed before your creation by grinding, sandblasting, polishing, shot blasting or with an overlay.
便携式研磨工具应装有安全防护装置，这样不仅可防止工人接触运转的砂轮表面，而且他们也不会被破裂时飞溅的碎片击中。
Portable grinding tools need to be equipped with safety guards to protect workers not only from the moving wheel surface, but also from flying fragments in case of breakage.
锥度研磨：研磨锥度表面的工艺，很大程度上依赖于蓝图的设计规范。
TAPER GRIND: Grinding process which produces angled surfaces, may be intentional or unintentional depending on blueprint specifications.
分析了不同加工参数对被加工内圆表面粗糙度和研磨量的影响。
Effect of different machining parameters upon the inner surface roughness and the removal rate was analyzed.
用砂纸打磨或研磨金属表面，准备涂层，并采用静电方法，喷枪或其他涂装设备，漆刷金属表面。
Sand or grind metal surfaces to prepare for coating, and paint metal surfaces using electrostatic method, spray gun or other painting equipment.
也就是你可以研磨材质或表面涂层的一小部分并且让它们恢复成原本看起来的表面外观吗。
As in, can you abrade small particles of the material or surface coating and leave behind an original looking surface.
探讨了固着磨料研磨中磨料尺寸、研磨压力和研磨速度等研磨参数对工件已加工表面残余应力的影响规律。
The effect of some lapping parameters, such as: abrasives size, lapping pressure and lapping speed, on the residual stress at surface of work-pieces was discussed.
所有传动轴、辊材质均为优质钢，高精度动平衡校正，镀硬铬、表面研磨。
All the tra mi ion axle and rollers are made of high-quality steel with high-precision dynamic balance, plated with rigid chrome and grinded surface.
保护所有零件表面避免损害，如有刮伤须研磨。
Protect all machined and lapped mating surfaces from damage.
研究光纤端面研磨时高质量表面的形成机理已成为提高光纤连接器质量和制造效率的重要课题。
The study on high quality surface formation mechanism in lapping of optical fiber end-face has become an important topic about improving performances of optical fiber connectors.
磁性研磨是一种利用磁场中的磁性磨料对具有相对运动的工件表面进行光整加工的新技术。
The magnetic abrasive finishing is a new technology used to process the surface of work piece by the relative motion with magnetic abrasive in the magnetic field.
也就是说粗研时增大研磨压力可减小工件已加工表面粗糙度值。
It means that in rough lapping the value of machined surface roughness can be reduced with lapping pressure increasing.
在硅片研磨过程中，由于应力的积累和剧烈的机械作用，硅片表面损伤严重，碎片率增加。
In the process of wafer polishing, the wafer surface could be damaged badly and fragment rate will increase sharply, because of the accumulation of stress and the mechanical action.
讨论了化学研磨原理及金属哑光表面控制。
The principles of chemical grinding and the control of matt metal surface were discussed.
本文研究了在热丝CVD方法生长金刚石薄膜中，基片表面的研磨处理对金刚石成核密度以及生长膜结构的影响。
The effect of substrate surface pre-polishing on nucleation of diamond and structure of diamond thin films by HFCVD has been studied.
若不锈钢表面有发纹加工时，请沿着研磨方向清洗。
If the stainless steel surface of the hair pattern processing, please follow the direction of abrasive cleaning.
浮法玻璃板、片及表面研磨或抛光玻璃板、片，不论是否有吸收、发射或非反射层，但未经其他加工。
Float glass and surface ground or polished glass, in sheets, whether or not having an ab - sorbent, reflecting or non-reflecting layer, but not otherwise worked.
修饰与改性方法包括形成包敷层和金属层、表面氧化、机械研磨以及掺杂等方法。
The methods of modification included the surface covering of graphite with a layer of disorganized carbon or a film of appropriate metal, surface oxidation, mechanical grinding and doping.
印刷棍表面研磨，度硬铬，平衡校正，运转平稳。
The surface of the printing roller is grinded and chrome plate, counter poise emendation, Steady operation.
论文采用单因素方法，对弹性浮动加工系统中研磨盘的转速、弹性系数对加工的表面质量的影响进行了研究。
In this paper, the effects of lapping speed and elastic coefficient on the quality of diamond surface are discussed.
无须使用车床就可以研磨棒材表面的操作。
An operation whereby the surface of a bar is ground without using a lathe.
分析了W -CMP的机理，抛光液对W材料表面具有化学腐蚀和机械研磨的双重作用，对抛光速率有着重要的影响。
The mechanism of W-CMP was analyzed, the slurry makes a dual function of chemical erosion and mechanical lapping, has an important influence on the polishing rate.
由于物流管道内表面磁力研磨的特殊性，管道及励磁机构都不宜作高速旋转运动。
Due to the special capability of the inner surface magnetic finishing, long tubes and excitation setup can not rotate quickly.
粉末涂料是一种颜料和干粉末树脂的细研磨粉粒的混合物，是一种当今使用的最新表面处理技术。
Power coatings, the mixture of fine milling powders of pigment and dry power of resins, are the latest technology for surface treatment currently used today.
表面经过精密研磨以精确配置阀瓣。
The surfaces are precision ground to fit accurately with the disc.
利用永久磁体及磁性磨料对零件表面进行研磨，是磁力研磨中的一种新方法。
To grinding part surfaces with permanent magnet and magnetic grains is a new method of magnetic grinding.
本文从砂带，研磨方法，试样表面状况三个方面，分析了试样研磨对铜合金主要元素测试结果的影响。
This paper analyses that grinding of sample influence testing result of main element in copper alloy from three respect, emery cloth, grinding method, surface condition of sample.
本文从砂带，研磨方法，试样表面状况三个方面，分析了试样研磨对铜合金主要元素测试结果的影响。
This paper analyses that grinding of sample influence testing result of main element in copper alloy from three respect, emery cloth, grinding method, surface condition of sample.
应用推荐