指出了国内外硫化促进剂的发展趋势。
The worldwide developing trends of rubber vulcanization accelerator were presented.
综述硫化促进剂CZ的合成工艺及应用技术进展。
The recent advances of vulcanization accelerator CZ are reviewed with emphasis on the synthetic technology and application with 13 references.
本文叙述了国内外硫化促进剂的现状和发展趋势。
The present situation and development trend of vulcanization accelerator at home and abroad were reviewed.
要约本发明涉及橡胶硫化促进剂m生产过程中的脱水方法。
The invention relates to a dehydration method during production of rubber vulcanization accelerator m.
目前，橡胶硫化促进剂m的生产方法主要采用苯胺法(即高压法)。
At present, the vulcanization promoter m production method mainly USES the aniline process (i. e, high-pressured law).
用途：用途：用于合成表面活性剂，硫化促进剂，酸性气体吸收剂。
Uses: used for synthesis of surface active agent, vulcanization accelerator, acid gas absorbent.
介绍了橡胶硫化促进剂TBBS及其原料叔丁胺合成方法及开发现状。
The synthesis and developing current situation of rubber accelerator TBBS and its material tertiary butyl amine were introduced.
由异丁烯二聚物与苯酚合成的辛基酚是制造橡胶工业的硫化促进剂所必需的原料。
The octylphenoi synthesized from dimer of isobutene and phenol is indispensable to the vulcanizing agents in rubber industry.
不溶性硫磺是一种性能优异的橡胶硫化剂和硫化促进剂，主要用于钢丝子午线轮胎的生产。
Insoluble sulfur is a high performance vulcanizing agent of the rubber and vulcanizing accelerator, which is mainly used to produce steel radial-ply tire.
采用促进剂DM和二环己胺为原料，以氨气为缚酸剂，用甲醇做溶剂合成橡胶硫化促进剂DZ。
This paper studied the synthesis of rubber accelerator DZ by rubber accelerator DM, dicyclohexyl amine and ammonia in the solvent of methanol.
前言：硫化促进剂nobs纯度的测定方法有三种：电位滴定法、指示剂滴定法和液相色谱法。
There are three purity measuring methods of vulcanizing accelerator NOBS: potentiometric titration, indicator titration and liquid chromatography.
研究了新型硫化促进剂TBSI在丁苯橡胶中的硫化特性、贮存稳定性及其硫化胶的物理机械性能。
The vulcanization behavior, storage stability of novel cure accelerator TBSI in SBR 1500 and the mechanical properties of its vulcanizate were studied.
研究了预交联型CR溶胶组分的门尼粘度、凝胶组分所占比例以及硫化促进剂种类对其硫化后拉伸强度的影响。
The influence of the sol Mooney viscosity, the gel proportion and the accelerator type on the tensile strength of precrosslinked CR vulcanizate was studied.
之后，一样的，会有为数众多的硫化剂和促进剂。
Then, too, there are numerous vulcanizing and accelerating agents.
结果表明，TBSI用作NBR硫化过程促进剂时，焦烧时间长，硫化胶强度高，但硫化速度较慢。
The results showed that as the accelerant of NBR in vulcanization, TBSI had much more scorching resistant time and higher vulcanization degree, but lower vulcanization rate.
几种不同防焦剂在硫黄硫化天然橡胶共混胶料中，随着促进剂的品种和几种促进剂并用的变化，在硫化系统中的作用机理和大小是不同的。
A few Kinds of anti-scorcher in NR blend cured with sulphur have a different mechanism of effect along with the change of accelerator type and blend of accelerators in curing System.
对硫化剂双酚af，促进剂bpp在氟橡胶中的应用进行了研究。
The application of curing agent bisphenol-AF and accelerator BPP to fluorine rubber was investigated.
研究了促进剂的种类，促进剂并用及硫化温度等条件对平衡硫化体系(EC)硫化天然橡胶(NR)的影响。
Effects of different kinds of accelerators, blending ratio and cure temperature on natural rubber (NR) cured with equilibrium cure system (ec) were studied.
研究了双酚硫化体系的硫化剂双酚AF和促进剂BPP的变量对氟橡胶硫化特性和物理性能的影响。
This paper presents researches that AF and BPP's variables have impacts on F-rubber's sulfuration and physics properties.
研究了促进剂m与DM在NR中的硫化特性，并深入探讨了它们对胶料加工性能及物性影响的差异。
The vulcanization behaviour of m or DM containing NR compounds was studied and their effects on the processibility and physical properties were in detail respectively investigated.
研究了硫化剂双酚AF、促进剂BPP用量及硫化温度对氟橡胶硫化特性的影响。
The effect of the levels of bisphenol AF and BPP and the cure temperature on the cure characteristic of fluorine rubber was investigated.
促进剂M的活化能比DM低得多，说明其硫化速度对温度的依赖性小于DM。
The accelerator M gave larger plastication to NR than DM at lower temperature, but DM would give larger plastication than M as the temperature increased.
针对几种橡胶的不同硫化体系，探索了Vocol - s等量取代二硫代氨基甲酸盐类、秋兰姆类促进剂所产生的硫化参数、力学性能的变化。
The change of vulcanization parameters and mechanical properties produced by Vocol-s equivalently replaced DTCs, thiurams accelerator was studied in different curing systems of some rubbers.
探讨促进剂NA 22硫化体系和三嗪硫醇（包括硫化剂AF和TCY）硫化体系对二元共聚氯醚橡胶（CHC）性能的影响。
The effects of the accelerator NA-22 curing system and triazine-mercaptan(including curatives AF and TCY) curing system on the properties of epichlorohydrin binary copolymer(CHC) were investigated.
通过测试结果的分析和比较得出，对于未加硫黄和促进剂的混炼胶和硫化胶的炭黑分散度等级，其测定结果基本准确；
It was found from the analysis and comparison of the test results that the test results of carbon black dispersity grades for the mixes without sulfur and accelerator were basically correct;
生胶选用NR/BR并用，硫化体系选用后效性促进剂和高温稳定的不溶性硫黄，补强体系选用低结构新工艺炭黑，并添加胶易素T 78和增塑剂。
The formula consists of NR/BR blend, high temperature-stable insoluble sulfur and delayed action accelerator, new technology carbon black with low structure, Gum-easy T-78 and plasticizer.
生胶选用NR/BR并用，硫化体系选用后效性促进剂和高温稳定的不溶性硫黄，补强体系选用低结构新工艺炭黑，并添加胶易素T 78和增塑剂。
The formula consists of NR/BR blend, high temperature-stable insoluble sulfur and delayed action accelerator, new technology carbon black with low structure, Gum-easy T-78 and plasticizer.
应用推荐