研究了短切高模碳纤维增强碳复合材料和碳基体材料气孔率对材料力学性能的影响。
Effects of porosity on the material performance of chopped high modulus carbon fiber reinforced carbon composites and carbon materials were studied.
利用自行设计的一套净成形真空液相压渗工艺装置制备了净成形碳纤维增强铝基复合材料。
A near net shaped carbon fiber reinforced Al composite was prepared by a new vacuum squeeze casting process.
着重探讨了碳纤维长度与掺量、水灰比、龄期及成型工艺对碳纤维增强水泥基复合材料导电性的影响。
Influence of length and amount of carbon fiber, water cement ratio, curing age and moulding technology on electrical resistivity of carbon fiber cement composite were discussed experimentally.
研究了碳纤维增强复合材料用湿法成型工艺、基体配方的性能和使用期。
The wet winding process for carbon fiber reinforced composites, the properties and service life of the resin matrix are studied.
本文对碳纤维增强铸型尼龙（CF/MC 尼龙）复合材料在不同吸湿介质中的吸湿行为进行了研究。
Tests are conducted to study the moisture absorption behavior of carbon fiber reinforced monomer casting nylon(CF/MC nylon)composites in four kinds of media.
根据均匀设计原理，对碳纤维增强铜基复合材料的磨损试验参数予以科学排列，不仅减少了试验次数，而且提高了试验数据统计结果的可靠性。
The friction and wear tests of the self lubricating bearing made of carbon fiber reinforced copper matrix composite materials are arranged by uniform design that can greatly reduce the test duration.
本文通过对碳纤维增强银、铜复合材料物理性能的测定证实了复合材料的烧结工艺对其物理性能存在显著影响。
The physical properties of carbon fibre reinforced silver and copper composites were measured to prove the effect of sintering processing on the properties of composites.
本文综述了碳纤维增强镁基复合材料的各种制备工艺方法，指出了它们各自的适用范围。
The preparation technology of carbon fiber reinforced magnesium matrix composites is described. After comparisons of some preparation methods, their applicable domains are pointed out respectively.
研究了三种不同界面结合状态(机械结合、溶解结合、反应结合)的碳纤维增强铜复合材料的界面结构及其对复合材料弯曲强度的影响。
Interface characteristics of carbon fiber reinforced copper matrix composite materials with various interface states and their effect on the flexural strength of the composites had been studied.
以碳纤维增强聚四氟乙烯（CF/PTFE）复合材料弯曲强度试验结果作为依据，开展CF/PTFE复合材料界面应力的研究工作。
The flexural strength of carbon fiber reinforced Polytetrafluoroethylene(CF/PTFE) composite increases with the increase of carbon fiber content both in modified and unmodified CF/PTFE composite.
对不连续碳纤维增强ZA - 12合金基复合材料的挤压铸造工艺进行了研究。
Fabrication technique of discontinuous carbon fibers reinforced ZA-12 alloy matrix composite was studied.
讨论了碳纤维的导热性与碳纤维增强复合材料导热性之间的关系和碳纤维增强复合材料导热各向异性问题。
The relationship between thermal conductivity of carbon fibers and thermal conductivity of carbon fiber reinforced composites and the problem of anisotropy of carbon fiber reinf...
纳米碳纤维在树脂基复合材料中具有更好的增强效果。
The effect of carbon nanofiber reinforcing polymer-based composites is better than the common carbon fiber.
本文介绍了的碳纤维增强复合材料的性能，简述了增强机理、成型工艺及其应用领域和发展趋势。
In this paper the properties of composites have been introduced. At the same time, the reinforced mechanism, processes, appliance and development have also been described.
结果表明，该方法可以很好地用于碳纤维增强复合材料的湿膨胀系数的试验测定。
The results showed that the method presented here can be used for the determining of CME of composite materials.
本文对金属基复合材料用增强碳纤维的涂层技术研究作了综述。
This paper summarizes the studies about carbon fibre coatings for fabrica_ ting metal-matrix-composites.
本文用SEM和ESCA技术研究了碳纤维增强PEK - C复合材料中纤维和基体间的界面及其复合材料的断裂界面形态。
Interfaces between fibre and matrix in carbon fibre reinforced PEK-C composites and morphology of fracture interfaces of the composites are studied with SEM and ESCA techniques in this paper.
用扫描电镜观察了用不同种类碳纤维增强的酚醛树脂复合材料的烧蚀样品，并对其微观结构进行了比较。
The ablated samples of the phenolic resin-composite reinforced by various kinds of carbon fibres have been observed with SEM, their micro-structures have been compared with each other.
碳纤维增强复合材料(CFRP)由于轻质高强，在大跨领域有着很好的应用前景。
Due to the lightweight and high strength of Carbon Fiber Reinforced Polymer (CFRP), it has good application future in large span structures.
随着材料科学、结构力学的飞速发展，碳纤维增强复合材料(CFRP)越来越多地应用于航空产品中。
Carbon fiber reinforced polymer (CFRP) is widely used for making leaf joint and cartridge receiver with the development of material science and structural mechanics.
目的通过对医用连续碳纤维增强聚烯烃复合材料的生物力学测试，了解其作为硬组织修复材料的力学性能。
Objective The purpose of this study is to evaluate biomechanical character of continuous carbon-fiber reinforced polyolefin composites as hard tissue repair material.
研究了铺层参数及纤维表面处理对芳纶纤维、碳纤维混杂增强环氧复合材料（简称混杂复合材料）纵向拉伸性能的影响。
The effect of stacking parameters and fiber surface treatment on the longitudinal tensile properties of F-12/CF hybrid epoxy composites had been studied.
讨论了碳纤维的导热性与碳纤维增强复合材料导热性之间的关系和碳纤维增强复合材料导热各向异性问题。
The relationship between thermal conductivity of carbon fibers and thermal conductivity of carbon fiber reinforced composites and the problem of an...
碳纤维增强树脂基复合材料是生产轻型飞机或大型航模的重要材料。
Carbon fiber reinforced plastic (CFRP) is an important kind of composite materials to produce light aircraft or large model aircraft.
本文介绍了金属基复合材料中常用增强物——碳纤维的结构及性能，特别总结讨论了碳纤维与常用金属的结合类型。
The paper deals with the structure and performance of carbon fibre used in MMCs and especially the reaction between it and some metals.
结果表明，挤压铸造法是制造不连续碳纤维增强锌合金复合材料的简便、有效方法。
Experimental results show that discontinuous carbon fibers reinforced ZA-12 alloy matrix Composite can be fabricated availably by squeeze casting.
结果表明，挤压铸造法是制造不连续碳纤维增强锌合金复合材料的简便、有效方法。
Experimental results show that discontinuous carbon fibers reinforced ZA-12 alloy matrix Composite can be fabricated availably by squeeze casting.
应用推荐