处理后采用TR240便携式表面粗糙度仪测定表面粗糙度。
The surface roughness was measured by TR240 mobile surface roughness meter.
用三坐标表面粗糙度仪测量了磨损体积，利用脉冲电位评价磨损产生的新生面与磨损表面的关系。
The wear volume was measured with 3D measuring instruments and the relationship between the fresh surface that fretting wear produces and worn surface was evaluated with the potential pulse method.
用三坐标表面粗糙度仪测量了磨损体积，利用脉冲电位评价磨损产生的新生面与磨损表面的关系。
The wear volume was measured with 3D measuring instrument and the relationship between the fresh surface fretting wear produces and lost surface was evaluated with the potential pulse method.
分别使用显微硬度仪、金相显微镜、表面粗糙度仪、铜库仑计以及螺旋测微仪等测试镀层相关性能。
The effects of current density on the performance of Ni and its alloy coatings were researched detailedly.
计算机控制测量，即时给出表面粗糙度参数，测量结果与计量用WYKO轮廓仪比对，结果吻合。
The surface roughness parameters can be measured in the time by a computer. Compared with metrological WYKO profiler, the measured results are consistent.
针对双光纤f—p干涉仪测量高精度表面粗糙度的原理，提出波长的空间扫描方法，并对其构成进行了分析。
The space scan method of wavelength is put forward for the principle of the dual FFPI sensor measuring precise surface roughness, and its basic construction is discussed.
针对测量领域深孔表面粗糙度测量存在的问题，研制了一种便携式微控表面粗糙度检测仪。
As for the problem of surface roughness measure of deep hole in measure field, developed a kind of portable micro-control surface roughness instrument.
在2201型表面粗糙度检查仪原有的电子设备基础上，提出从软、硬件两方面对表面粗糙度检查仪进行微机化改造。
Based on original electronic equipment of surface roughness measuring instrument Model 2201, the instrument is computerized from both software and hardware.
其次，使用由FFT快速傅立叶分析仪、激光传感器等组成的检测系统，进行了激光传感器对木材表面粗糙度定量测量方法的研究和木材表面缺陷识别的研究。
Secondly, laser sensor quantitative measure wood surface roughness method and wood surface defect recognition are studied by the test system consisting of FFT analyzer, laser sensor etc.
本文所述的交互式绘制零件图软件不用编写程序可描绘任意图形，标注尺寸及公差，书写字符及画表面粗糙度符号，并可起到数字化仪的鼠标器作用。
This software can plot freely, draw any figure, mark dimension and tolerance, write symbols and draw surface-roughness symbols. It can also function as a mouse in digitalizer.
一种新型的、用于在线测量表面粗糙度的激光外差干涉仪已研制完成。
A novel laser heterodyne interferometer used for on-line measuring surface roughness has been developed.
从而，扩大了只用于测量单参数的表面粗糙度检查仪的使用功能，以满足表面粗糙度国家标准所规定的评定参数的要求。
By this method, the function of the instrument is extended and can satisfy the requirement of the surface roughness national standard. The program flow chart is given.
用三维形貌仪测量工件的表面粗糙度，并对数值进行分析，结果表明磨牙冠的加工符合设计要求。
The surface roughness of workpiece was measured with 3d Profiler. The test results show that the surface roughness is consistent with design requirements.
用三维形貌仪测量工件的表面粗糙度，并对数值进行分析，结果表明磨牙冠的加工符合设计要求。
The surface roughness of workpiece was measured with 3d Profiler. The test results show that the surface roughness is consistent with design requirements.
应用推荐