Rubber toe and heel is abrasion resistant.
橡胶脚尖和脚跟是耐磨。
Abrasion resistant rubber toe guard for added protection.
耐磨橡胶，增加保护脚趾后卫。
They give tough, resilient coatings that are abrasion resistant.
它的坚韧特性提供了耐磨损性能。
Full-grain leather with impact and abrasion resistant PU shell for safety.
全粒面皮革与安全的影响和聚氨酯耐磨外壳。
An extremely strong, abrasion resistant nylon jacket is braided over a braided nylon core.
非常结实耐磨，尼龙芯外包裹尼龙制护套。
Therefore, impact abrasion resistant surfacing electrode of this kind was studied in this paper.
为此，进行了对此类抗冲击磨损堆焊焊条的研究。
The axle center adopts special abrasion resistant steel materials, which is firm, stable and durable.
轴心采用特殊耐磨钢材、牢固稳定、经久耐用。
The outer sheath of cables has high mechanical strength, good abrasion resistant and high polish degree.
电缆外护套机械强度高、耐磨性好，并且具有高光洁度。
This belt type has an excellent TPU cover material that is abrasion resistant and also resistant to premature wear.
此带式，具有优良的TPU覆盖材料，耐磨损和过早磨损也耐。
The surface and the adjusting media of the valve shaft are nitrogenized so that it is erosion and abrasion resistant.
阀杆经调质及表面氮化处理，有良好的抗腐蚀性及抗擦伤性。
With protective cover, the control cable enhances the abrasion resistant and insulation, which improves the reliability.
控制电缆带有保护套，增加了耐磨性能和绝缘性能，提高了可靠性。
BonTaoTM ARM (Abrasion Resistant Material) is more durable, which makes the line goes out through the guide more smoothly.
趣道t M抗磨损材质，更耐用，使出线更流畅。
Our general purpose conveyor belts have superior abrasion resistant covers that are available with high or low friction covers.
我们一般用途的传送带具有较高的耐磨性盖。
The high cycle rate of the valves, and the abrasive nature of the quartz powder require an abrasion resistant valve that will last.
由于阀门使用的高频率，以及石英粉末的研磨特性，都要求耐磨性很高的阀门才经受得起。
An adhesive abrasion resistant coatings with good washout resistance for hydraulic mechanical elements and equipment has been developed.
研制了一种应用于水力机械元件和设备的抗冲蚀磨损的胶粘耐磨涂层。
Applicable scope: overground and underground high stringent concrete project. And anti-freeze, impervious, abrasion resistant concrete project.
适用范围：应用于地上、地下高强度的混凝土工程及抗冻、抗渗、耐磨性要求的混凝土工程。
Applicable scope: overground and underground high stringent concrete project. And anti - freeze, impervious, abrasion resistant concrete project.
适用范围：应用于地上、地下高强度的混凝土工程及抗冻、抗渗、耐磨性要求的混凝土工程。
Our abrasion resistant ceramics performance is 266 times of manganese steel and 171.5 times of high-chromium cast iron calculated by weight loss.
根据磨损重量计算，我厂生产的耐磨陶瓷性能相当于锰钢的266倍，相当于高铬铸铁的171.5倍。
The application of abrasion resistant bead welding in bucket teeth of excavator, shovel bucket of excavator and bucket teeth of loader was presented.
介绍耐磨堆焊在挖掘机斗齿、挖土机挖斗、装载机斗齿上的应用。
The paper introduces a method of developing composite paint. The paint have good electric performance, enough abrasion resistant and certain intensity.
研制了一种抗锈蚀耐磨损复合导电涂料，该涂料具有较好的导电性、 耐磨性和一定的强度。
The results indicated the JME modified epoxy mortar was optimal material for erosion and abrasion resistant material for the repair of damaged composites.
JME改性环氧树脂砂浆是高速水流抗冲磨修补的理想材料。
In order to satisfy the service of heat-engine plant mill, a kind of abrasion resistant cast steel liner that has high strength and toughness was developed.
为了满足火电厂磨机的安全运行，开发了一种高强度、高韧性低合金耐磨铸钢衬板。
The room temperature cured abrasion resistant anticorrosive coatings is prepared with E-20 epoxy as binder and molybdenum disulfide and aluminum oxide as fillers.
以环氧E-20为基料，加入二硫化钼、氧化铝为填料的一种常温固化耐磨防腐涂层。
Abrasion resistant, scratch and bruise resistant: the wax is distributed in the coating to protect it and prevent scratches, abrasions and provides abrasion resistance.
耐磨、防刮伤、防擦伤：蜡分布在涂膜中借此保护涂膜、防止刮伤、擦伤并提供耐磨损性。
An abrasion resistant coatings on metal substrates, based on ceramics as aggregate and monobasic aluminum phosphate as binder, mixed with various fillers, has been developed.
研究了以陶瓷颗粒为骨料，磷酸二氢铝为基料，添加多种无机填料的金属用耐磨耐高温涂料。
The coating is abrasion resistant, anti-skid, oil resistant, chemical resistant, and washing-proof. It can be applied on wet surface construction and cured in room temperature.
该涂料可常温固化、耐磨、防滑、耐油、及耐一般化学药品腐蚀、耐洗刷，可湿面施工。
The abrasion resistant coatings are reviewed in terms of epoxy modified abrasion resistant coatings, ceramic abrasion resistant coatings and nano-scale abrasion resistant coatings.
从环氧树脂改性耐磨涂料、陶瓷耐磨涂料以及纳米技术在耐磨涂料中的应用等几方面对改性耐磨涂料进行综述。
It is foreseen a bright future applying the Spray Technology of SPUA in solving the problems of Abrasion resistant, resistant seepage and corrosion resistant of hydraulics projects.
实践证明这种技术对于解决水利水电工程中抗冲磨、抗渗及防腐蚀等方面具有广阔的应用前景。
The results show that the modified abrasion resistant medium chrome white cast iron can successfully be applied to slurry pumps which should work under medium or medium-high wear duties.
结果表明：经化学成分调整后中铬抗磨白口铸铁可成功用于生产中等或中等稍强磨损工况下使用的渣浆泵，成本低，耐磨性优良。
This paper introduces the size, seam form, moulding technology, the clamp part's selection, use and installation of super_high molecular weight polythene abrasion resistant lining board.
介绍超高分子量聚乙烯耐磨衬板的尺寸，砌缝的形式，成型工艺，紧固件的选用及其使用与安装。
应用推荐