Home after entry in wear slippers, best reduce sand dust abrasion on the surface of a landscape stone.
住家最好入门后换穿拖鞋，减少砂粒尘土磨损景观石表面之机会。
It has a rolled, rigidized surface which gives it a high modulus of rupture and compressive strength as well as high abrasion and hot gas erosion resistance.
它具有滚压刚化表面，不仅断裂模数大、耐压强度高，而且具备良好的抗磨损和抗热气腐蚀能力。
The file hard (60rc) high strength aluminum alloy tube provides a smooth corrosion free sealing surface and excellent abrasion resistance.
文件的硬(60rc)高强度铝合金管提供了一个平稳无腐蚀密封面和良好的耐磨性。
New environment-friendly water-based varnish: excluding ketones, volatile organic compounds were very low; durability and good abrasion resistance, surface hardness of up to 2H.
新型环保水性清漆：不含酮，有机挥发物含量极低；耐久性和抗磨损性好，表面硬度可达2H。
The surface roughness in mill machining relates to quiver of work piece, principal axis's eccentricity, cutter abrasion, cutter distortion and other physical or geometry factors.
铣削加工表面粗糙度的形成与铣刀和工件振动、主轴偏心、刀具磨损、刀具变形等物理和几何因素有关。
It is put out that the injector and extruder are strengthened on the surface by laser surface alloy to improve its high temperature abrasion and lengthen life of the injector.
提出了采用激光表面合金化的方法对注塑机和挤出机螺杆表面进行强化，以提高其抗高温粘着磨损性能，延长注塑机使用寿命。
The paper applies the technology of image processing and recognition to the detection of abnormal abrasion on the surface of cylinder liner.
论文把图像处理与识别技术直接应用到气缸套表面异常磨损检测中。
By considering the effects of gas velocity and particle circulating rate on the surface abrasion rate, an empirical equation is proposed.
实验结果揭示了气体流速和固体颗粒循环速率两个操作条件对磨损速率的影响规律。
By make experiment of plunger case surface abrasion hardness, in the last, adopt high strength engineering plastic to act as anti-abrasive material, make the success, get great result.
通过对柱塞的表面耐磨层进行各种试验，最后采用了高强度工程塑料进行压注试验，取得了成功，效果显著。
Also, severe biofouling, physical abrasion, and chemical etching of the glass may erode the sensing surface.
严重的玻璃生物淤积、理磨损和化学腐蚀可能影响感觉表面。
According to the surface abrasion form of cast iron seal ring, the author proposed that composite brush plating can effectively repair and strengthen the mating surface of cast iron seal ring.
根据铸铁密封环的表面磨损形式，提出采用复合刷镀技术可有效修复和强化铸铁密封环的配合面。
The file hard (60RC) high strength aluminum alloy lobe tube provides a smooth, corrosion-free abrasion-resistant sealing surface.
文件的硬（60RC）高强度铝合金叶管提供了一个平滑，无腐蚀耐磨密封面。
To prevent the leakage of power station boiler, the coating resistant to abrasion was prepared on the tube surface damaged by the power station boiler soot blowers.
为防止锅炉受热面泄漏，可在电站锅炉吹灰器吹损的管壁表面喷涂耐磨涂层。
Mechanical strength, machinability, surface corrosive and wear abrasion of a new type glass ceramic composed of fluorophlgopite Ca-mice were studied in this article.
研究了一种新型的钙云母为主相高强度的可切削玻璃陶瓷的力学性能、可加工性、表面耐腐蚀性、耐磨耗性。
Thesurface hardness, corrosion resistance, abrasion resistance and light fastness as well as the surface colour of metals can be improved through oxidizing and Colouring processing.
金属材料表面经氧化和着色后，可提高其表面硬度、耐蚀性、 耐磨性、耐光性和增加表面色彩。
The results show that the disabled parts are mostly focused on the coating, such as surface abrasion, cracking because of abrasion.
结果表明，损伤失效部位主要集中在涂层，形式包括表面磨损以及磨损引起的开裂。
Flat versions allow sediment and particles to sweep past the measurement surface, minimizing risks of abrasion, breakage and coating.
平面型允许沉淀物、微粒掠过测量面，并可把擦伤、损坏和镀膜的危险降到最小。
Excessive abrasion on the occlusive surface of artificial teeth in removable denture may lead to lower masticatory efficiency after being used a long time.
可摘义齿在长期使用后，常由于人造牙咬合面过度磨耗导致咬合接触不良、咀嚼效能降低。
On base of analysing theory of roller surface abrasion, new materials of welding agent are introduced.
在分析辊压机辊面磨损机理的基础上介绍了辊面堆焊修复的新材料。
B. characteristics: nylon coating, surface gloss good, adhesion, high abrasion resistance, resistant to moisture, corrosion resistance, ageing resistance.
特性：尼龙涂层，表面光泽度好，附着力强，耐磨，耐潮湿，耐锈蚀，耐老化。
Through permeability resistance test, sulfate corrosion test and abrasion resistance test, the relationship of construction techniques, concrete surface quality and durability was reached.
通过混凝土抗渗性试验、抗硫酸盐腐蚀试验和耐磨性试验，得出施工工艺和混凝土表面质量与混凝土耐久性的关系。
In order to improve the abrasion-resistant on the casting surface, this paper has studied surface alloy-reinforced composites.
为了提高铸件表面的耐磨性，本文研究了合金增强表面耐磨复合材料。
In order to improve the abrasion-resistant on the casting surface, the low-Cr cast iron matrix composite reinforced by WC particles in sand mold was made in the experiment.
为了提高铸件表面的耐磨性，实验以低铬铸铁为基体，WC颗粒为增强体，制备出颗粒增强表面耐磨复合材料。
According to the difference of action parameter on surface, silt abrasion appearance registers as wedging, relieving, ploughing, and cutting, etc.
根据颗粒对表面作用的不同，磨损形貌表现为冲击、铲削、犁耕及切削等类型。
The invention provides a sinter oil-containing bearing that inhibits self abrasion and shaft abrasion even under the high surface pressure and manufacturing method thereof.
本发明提供一种，即使在高面压条件下，仍可以抑制轴承自身的磨损以及抑制轴磨损的烧结含油轴承及其制造方法。
The splinted shaft is made of alloy and the surface is specially treated, its abrasion performance and fatigue strength is enhanced.
花键轴采用合金材料进行特殊表面处理，提高了耐磨性及疲劳强度。
The splinted shaft is made of alloy and the surface is specially treated, its abrasion performance and fatigue strength is enhanced.
花键轴采用合金材料进行特殊表面处理，提高了耐磨性及疲劳强度。
应用推荐