Study on abrasive wear resistance of boronized layer eutecticumed with laser;
对马氏体细晶粒高强度钢的冲击磨损性能进行了研究。
The abrasive wear resistance of the coating reduced when WC content was more than 25%.
当粉芯中WC质量分数超过25%后，涂层的耐磨性有所下降；
The user can input, store, inquire and print the data of abrasive wear resistance materials by AWRMDS.
通过AWRMDS，用户可以输入、存储、查询和打印耐磨料磨损材料数据。
Bainite has higher abrasive wear resistance than tempered martensite with equal or higher hardness in hard abrasion, but in reverse in soft abrasion.
下贝氏体组织在高应力磨料磨损下比相同硬度，或稍高硬度的回火马氏体组织具有较高的耐磨性，但在低应力磨损下表现为不利的作用。
The impact abrasive wear resistance of materials and its fatigue wear mechanism under the conditions of quartz and coal as abrasive had been investigated.
研究了石英和煤两种磨料条件下材料的冲击磨料磨损耐磨性及其疲劳磨损机制。
The influence of carbon in martensitic matrix (by use different austenizing temperature) on two body abrasive and impact-abrasive wear resistance of ductile iron is studied.
针对马氏体球铁，研究了马氏体基体不同含碳量（不同奥氏体化温度）对两体磨损和冲击磨料磨损耐磨性的影响。
The reason for abrasive wear resistance enhancement of bionics smooth surface made by Laser Carving Technology is grain super-refining strengthening, hardening, effect of dowel pin and bionics.
激光雕刻仿生非光滑表面耐磨性提高的原因是：晶粒超细化，硬度提高，桩钉效应和仿生效应。
Aluminum Oxide Specific gravity 2.4 Moh hardness 3. More a filler than an abrasive. Tends to fade, but has good wear resistance. Will polish the opposing surface.
氢氧化铝比重2.4莫氏硬度3。比磨料加得更多的填充物。有衰退趋势，但耐磨性好。将抛光对偶。
When WC content is more then 50%, spray-fusing technological property becomes worse, hardness of sprayed coating and low-stress abrasive particle wear resistance are weaken.
当w（WC）大于50%时，WC的加入使喷熔工艺性能变得极差，喷熔层的硬度和耐低应力磨粒磨损性能降低。
The wear resistance of casting composite medium manganese steel has been studied under the condition of impact abrasive wear.
研究了铸造复合中锰奥氏体钢在冲击磨料磨损条件下的耐磨性能。
The results show that the abrasive wear loss is mainly controlled by micro-cutting and microcracking. The wear resistance may be determined by the combination of strength and toughness.
结果表明，材料的磨料磨损主要由显微切削和显微裂纹两个因素控制，材料的耐磨性由其强度与韧性的配合所决定。
The results show that the alloy possesses fine and uniform microstructure and excellent wear resistance in which slide and abrasive wear are dominant in the wear behavior.
研究结果表明：半固态挤压成形合金具有细小、均匀的微观组织和良好的耐磨性，磨损失效形式以滑动和磨粒磨损为主。
Experiments were carried out upon the hardening and toughening, wear resistance and abrasive behaviour of the low alloyed high carbon wear resistant cast steel.
对所研制的高碳低合金耐磨钢的强韧化、耐磨性及磨损行为进行了研究。
Based on abrasive wear theory and combined recent and ancient samples, the essential of the sharpness, wear resistance, sharpened-ability and self-sharpening performance of cutter were discussed.
以磨料磨损原理为指导，结合古今实例，讨论锋利刀片之锋利性、耐磨性、利磨性和自磨锐等问题的实质，给出明确定义，澄清一些模糊概念。
The abrasive resistance of the coating prepared by the paint disclosed by the invention is obviously improved; the degree of wear of the coating is reduced when the coating is worn;
由本发明公开的涂料制备的涂层的耐磨性得到了显著提高，能降低涂层在受到磨擦时的磨损程度；
The abrasive resistance of the coating prepared by the paint disclosed by the invention is obviously improved; the degree of wear of the coating is reduced when the coating is worn;
由本发明公开的涂料制备的涂层的耐磨性得到了显著提高，能降低涂层在受到磨擦时的磨损程度；
应用推荐