If the whole single ac servo control system is accomplish, farther research is must.
完成整个单芯片交流伺服控制系统尚需进行进一步的研究。
This article takes TMS320F2812 as a core, adopting fuzzy PI control method to design an AC servo control system.
本文就以TMS320F 2812为核心，以模糊pi控制策略设计交流伺服系统。
This paper introduces an AC servo control system based on the design of CPLD and analogue controller integration.
交流伺服控制系统的组成本文所设计的交流伺服控制系统是用于数控机床上的进给驱动系统。
The purpose of this paper is researching intelligent two-axis AC servo control system based on CAN BUS in the background of rotary scream printing .
本课题的目的是研究以圆网印花为工程背景的基于CAN总线的智能双轴交流伺服控制系统。
At present, ac servo control system has widely applied in automation area, for example NC machine, steel rolling equipment, paper making equipment and weave machine etc.
目前，交流伺服控制系统已经广泛应用于数控机床、轧钢设备、造纸设备、纺织设备等自动化领域。
Adopting ac servo motor as the driving device, can the dc servo motor and a high precision, high performance as the half closed loop or closed loop control system.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
This paper presents an AC servo system based on fuzzy neural variable structure control.
本文提出了一种基于模糊神经变结构控制的交流伺服系统。
The results of experiments show that the ac servo system based on fuzzy control has quick response speed, high steady accuracy and good robustness.
实验结果表明基于模糊控制的交流伺服系统具有较快的响应速度、较高的稳态精度和较强的鲁棒性。
The results of experiments show that ac servo system based on fuzzy PID control has quick response speed, high steady accuracy and good robustness.
实验结果表明，基于模糊pid控制的交流伺服系统具有响应速度快、稳态精度高和鲁棒性强等特点。
The results of experiments show that AC servo system based on integral partition PID control has quick response speed and h.
实验结果表明，基于积分分离PID控制的交流伺服系统具有响应速度快、稳态精度高等特点。
Aim at technics and control of build-up standard machine, particular introduced the appliance of Siemens SIMODRIVE 611a ac servo system in build-up standard machine.
针对机械比对力机的工艺和控制要求，详细介绍了西门子SIMODRIVE 611a交流伺服驱动系统在机械比对力机上的应用。
Adopting ac servo motor as a drive device, can and dc servo motor as a high precision, high performance and a half closed loop or closed loop control system.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
This article introduced emphatically the control strategy, position detection and identification, drive technique as well as main circuit of permanent magnet Ac servo system.
重点介绍了永磁交流伺服系统的控制策略，位置检测和辨识、主电路和驱动技术等关键技术。
A cascaded slide mode control scheme is designed for permanent magnetic synchronous machine ac servo system.
针对永磁同步电机交流伺服系统，提出了串级滑模控制方案。
FUZZY controller with a correcting factor is utilized to control a ship based radar stabilizing plant servo system consisting of a MCS 51 family single chip computer and ac servo units.
以MCS -51系列单片机和交流伺服装置组成的舰载雷达稳定平台伺服系统为对象，采用带修正因子的FUZZY控制器对其进行控制。
The hardware and software design of three_dimensional control system in the laser inner carver is introduced, also transmission mechanism ac servo drive has been given account.
介绍了激光内雕机中三维控制系统硬件和软件的设计，并对传动机构交流伺服驱动进行了论述。
This paper presents a sliding mode variable structure control (SMVSC) method based on fuzzy self-learning for a direct-drive AC Lin ear servo system.
针对直接驱动直线式交流伺服系统，提出了一种基于模糊自学习的滑模变结构控制方案。
For digitized AC servo system, it needs software to support it's closed-loop control. Its control quality is decided by the program of control computation directly.
数字化的交流伺服系统是靠软件完成控制计算来支持闭环控制的，它的控制计算程序直接决定了系统的控制质量。
In the meantime, by using an AC servo motor as the driving parts and based on the MPC02 motion control card, the open control system was formed.
同时采用交流伺服电机作为驱动元件，基于MPC02运动控制卡作为上位控制单元构建了开放式控制系统。
The whole project design of the AC servo motor control system based on TMS320F2812 is introduced.
介绍了基于TMS320F2812交流伺服电机控制系统的整体方案设计。
In this paper a new control strategy suited for AC servo system of permanent magnet AC motor is introduced.
本文介绍了一种适用于正弦波永磁同步伺服系统的控制策略。
A global sliding model variable structure control scheme based on artificial neuron compensation for a direct drive AC permanent magnet linear servo system are presented in this paper.
针对直接驱动的交流永磁直线伺服系统，提出一种基于神经元补偿控制的全程滑模变结构控制策略。
For AC servo system of permanent magnet synchronous motor (PMSM), the position servo controller was constructed with direct torque control and self-adjusting PI control based on Fuzzy inferences.
在永磁同步电机交流伺服系统中，采用直接转矩控制及模糊自适应PI控制构成位置伺服控制器。
The article introduced the composition, the main characteristics and the control principle of the ac servo motor control system as well as points for attention in the system debugging process.
介绍交流伺服电机控制系统的组成、主要特性、控制原理及在系统调试过程中应注意的事项。
And after the discrete mathematic model for stability analysis and design a set of military reinforcement machine load of embedded system with ac servo device combined with the dynamic control system.
并对离散化后的数学模型进行稳定性分析，设计了一套以军用加固机加载嵌入式系统与交流伺服装置相结合随动控制系统。
Permanent ac servo motor control system of lockstitch sewing machine is introduced.
介绍了一种用于电脑全自动工业平缝机的永磁交流伺服电机及其控制系统。
The paper designs and analyzes the compound control principle of the AC servo system. To against the shortage of the common FZ-PID controller, a complex controller with fuzzy switch is proposed.
设计与分析了交流伺服系统FZ - PID的复合控制原理，针对阀值切换所存在的缺陷提出了一种基于模糊规则切换的复合控制器。
To improve the tracking performance of ac servo-system, PFC-PID cascade control strategy is presented by combining the PFC with PID control.
为了提高交流伺服系统的跟踪性能，将预测函数控制(pfc)和PID控制相结合，提出了一种PF C - PID串级控制策略。
The software and hardware of a digital AC servo system using a digital controller DMC300A as the control center is designed. This method to obtain some important parameters is proposed.
论述了以数字控制器DMC300A为核心的数字式交流伺服系统的硬件和软件设计，对设计过程中所涉及到的重要参数给出了设定方法。
The software and hardware of a digital AC servo system using a digital controller DMC300A as the control center is designed. This method to obtain some important parameters is proposed.
论述了以数字控制器DMC300A为核心的数字式交流伺服系统的硬件和软件设计，对设计过程中所涉及到的重要参数给出了设定方法。
应用推荐