Feedback is used in control, but it is just limited to adaptive process.
在其中使要用到反馈的，但反馈仅限在自适应过程本身采用。
Various forms of process control, including statistical process control, run by run and adaptive control, and real-time feedback control, are covered.
各种形式的过程控制，包括统计过程控制，通过运行和自适应控制运行，并实时反馈控制，上述内容都将包括在本课程的探讨范围内。
Based on the theory of Complexity Adaptive System (CAS), the process of a kind of infectious disease, SARS, from its breakout to tending stable under certain control, is investigated.
以复杂适应性系统理论为基本的指导思想，考察了传染病非典型性肺炎(SARS)的爆发流行以及受到控制趋于稳定的过程。
The identification method can be used in adaptive control of process and industrial instrumentation.
该辨识方法可以在过程和仪器的自适应控制中采用。
Present a kind of application of recursive identification and adaptive control to sulfuric acid process.
论述了硫酸生产过程的递推辩识与自适应控制的一种应用。
Adaptive fuzzy control is studied and used to control constrained milling process for constant cutting force. The experiment shows that the control method proposed useful.
讨论了自适应模糊控制的实现方法，并研究了其在有约束的恒力铣削加工过程中的应用。加工实验表明这种方法简单实用。
This paper proposes a method of using neural network model reference adaptive controller to control machining process.
本文提出了用神经网络模型参考自适应控制器对加工过程进行控制的方法。
Active noise control (ANC) is a new high technology integrated with acoustic, adaptive control and digital signal process and it has become the research focus center of noise control.
主动噪声控制是集声学、自适应控制及数字信号处理等技术为一体的高新技术，已成为国内外噪声控制界的研究热点。
In view of a kind of typical time-varying parameters of the actual industrial process, based on the model reference adaptive control (MRAC) theory, presents a new adaptive control plan.
针对一类典型的参数时变的实际工业过程，基于模型参考自适应控制(MRAC)理论，提出了一种新的自适应控制方案。
Based on the analysis of self-adaptive fuzzy control and the influence of PID control parameter changes, the rules of fuzzy adjustment of PID parameters in a dynamic process is put forward.
在分析自适应模糊控制及PID参数变化对系统性能影响的基础上，提出在动态过程中对PID参数进行整定。
Based on the analysis of self-adaptive fuzzy control and the influence of PID control parameter changes, the rules of fuzzy adjustment of PID parameters in a dynamic process are put forward.
在分析自适应模糊控制及PID参数变化对系统性能影响的基础上，提出在动态过程中对PID参数进行整定。
Link quality analysis (LQA) is a key measurement process in adaptive frequency hopping (AFH) communication systems and results in adaptive frequency and power control.
信道质量评估是自适应跳频通信的关键技术，其实时评估结果为自适应频率控制和自适应功率控制提供依据。
Presents a control method of biochemistry process with intelligent control adaptive predictive system.
介绍了一种生物化学产品生产过程的组合模型控制方法。
The algorithm guarantees the network system robustness during the whole control process and USES RBF neural network as adaptive law to eliminate the effect from the disturbance of UDP flow.
该算法保证网络系统在整个控制过程中的鲁棒性，并且使用RBF神经网络作为自适应律来消除UD P流干扰对系统的影响。
The adaptive feedforward control technology, which is implemented in the stretch reducing process of seamless pipe wall thickness at Baosteel Tubing Plant, is introduced.
介绍了宝钢分公司钢管厂在无缝钢管张减过程壁厚控制中实现的前馈自适应控制技术。
The simulation results show that the rule-adaptive fuzzy control has better static and dynamic performances, and follows filling curves very well and ADAPTS to the changes of process parameters.
仿真结果表明，规则自适应模糊控制具有较好的动态和静态性能，不但具有很好的工艺曲线跟踪性能，而且对过程参数的变化有很强的适应性。
A adaptive control interpolation algorithm based on motion detection is presented to process de-interlacing.
对去隔行处理采用基于运动检测的自适应控制内插算法。
Adaptive computer control is used to mitigate the nonideal features inherent in the optical source and in the spectrum modulation process.
自适应计算机控制用于减轻在光源和频谱调制过程中固有的非理想特性。
According to the requirement of smelting process for electrode control system, a fuzzy adaptive PID controller is presented and has been applied to practical control of e...
本文针对冶炼工艺对电极控制系统的要求，提出了一种模糊自适应PID控制方法，并成功地应用于电极的实际控制。
According to the requirement of smelting process for electrode control system, a fuzzy adaptive PID controller is presented and has been applied to practical control of electrode suc...
本文针对冶炼工艺对电极控制系统的要求，提出了一种模糊自适应PID控制方法，并成功地应用于电极的实际控制。
The ways of founding the characteristic line equation for adaptive incremental bending is feasible to realize numerical control of the bending process.
自适应增量弯曲特征线方程的建立思想，对于实现零件数控弯曲成形过程是可行的。
Simulation results show that the designed system is of fast response, non-overshoot and it is more effective than the conventional adaptive control of machining process based on neural network.
仿真结果表明，该系统响应快，无超调，比传统的加工过程神经网络自适应控制具有更好的控制效果。
The strategy and the process of design are expounded. The model of fuzzy adaptive control which used in hot blast stove is established.
详细阐述了热风炉燃烧控制系统的设计思想及设计步骤：建立了热风炉模糊自适应控制模型；
The adaptive process extenuates the influence of parameter uncertainty, and the robustness of the dynamic sliding mode control inhibits the influence of unknown dynamics and measurement noise.
用自适应过程减小参数不确定性的影响，并通过动态滑模控制器的高鲁棒性抑制机器人模型中的未知非线性动力学及测量噪声等的影响。
The keys to adaptive control with optimization of machining operations are modeling of cutting process and selecting of real time optimal strategy.
机械加工最优自适应控制的关键在于自适应加工模型的建立和实时优化策略的制定。
Injection moulding filling and holding process close loop PID and model reference adaptive control are presented. Discussion about parameter selection for filling and holding control is made.
本文采用PID及模型参考自适应控制对注塑机注射及保压阶段进行闭环控制，并分析讨论了注射保压阶段控制参数的选取。
Combining information entropy, wavelet analysis with neural network, an adaptive control system and an adaptive control algorithm are presented for machining process based on wavelet neural network.
把信息熵、小波分析和神经网络相结合，提出了基于小波神经网络的加工过程自适应控制系统度其自适应拉制算法。
Combining information entropy, wavelet analysis with neural network, an adaptive control system and an adaptive control algorithm are presented for machining process based on wavelet neural network.
把信息熵、小波分析和神经网络相结合，提出了基于小波神经网络的加工过程自适应控制系统度其自适应拉制算法。
应用推荐