Adhesive strength, hardness and the thermal shock resistance of spraying coating were tested.
测试了喷涂层的结合强度、硬度以及抗热震性能。
The factors affecting the Adhesive strength between Silicone Rubble and Aluminum during the course of manufacture of new Hot Printing Plate were investigated.
研究了新型烫印版制备过程中影响硅橡胶与铝板之间粘结强度的因素。
The results show that the selection of second monomer has great effects on the adhesive strength. Good adhesion for PVC can be obtained if AM is used as the second monomer.
试验结果表明：第二单体的选择对粘接强度影响很大，以AM作为第二单体所得接枝共聚物对PVC具有优异的粘接性能。
The factors which influenced adhesive strength, curing speed of reactive polyurethane hot melt adhesive were studied.
考察了各因素对反应型聚氨酯热熔胶粘接强度、固化速度等性能的影响。
Wood floor adhesives should have properties of highly adhesive strength and good durability, water resistance and impact resistance.
木地板粘结剂应具有足够的粘结强度和良好耐久性、耐水性和抗冲击性能。
Two siloxane epoxy curing agents were synthesized, and the effects of the products on the adhesive strength, refractive index and transparence of epoxy adhesive were studied.
合成了两种硅氧烷环氧固化剂，并研究了它们对环氧树脂胶粘剂的粘接强度、折射率、透光性等方面的影响。
The content of PTFE powder filled in the epoxy adhesive can affect the impact strength, adhesive strength, hardness and dry-wear property of the adhesive.
介绍用聚四氟乙烯粉填充于环氧胶中，研究了粉的含量对冲击强度、粘接强度、硬度、干磨性能的影响。
The average reliability of defects classification is over 80%, and the estimation of adhesive strength is satisfactory.
胶接缺陷的平均识别率在80%以上，胶接强度的估计精度也令人满意。
The effect of polyvinyl acetals on its adhesive strength was investigated.
探讨了聚乙烯醇缩醛的粘接强度的影响。
The results of this paper have shown that it is successful for improvement on the water proof and adhesive strength of PVF with TDI.
研究表明甲苯二异氰酸酯对聚乙烯醇缩醛胶粘剂耐水性改性是可行的并且能提高胶粘剂的粘接强度。
The influence of the kinds of epoxy resin, the proportion of composite curing agent , and the content of accelerant on the adhesive strength and heat resistant properties of adhesive were discussed.
重点讨论了环氧树脂种类、复配合固化剂比例以及促进剂用量对胶粘剂粘接强度和耐热性能的影响。
The effect of kinds of polysiloxane coupling agents, different treatments on the adhesive strength has been investigated by using shear adhesive strength and SEM.
利用剪切粘接强度、SEM等方法，考察了有机硅烷偶联剂的种类和处理方法对丙烯酸酯类胶粘剂，粘接强度的影响。
Three typical manifestations of wafer bonding strength were introduced as tensile strength, shear strength and adhesive strength.
介绍了三种典型的圆片键合强度表现形式：抗拉强度、剪切强度和粘接强度。
Nanometer coat and coating material has good wearing resistance, anti - aging performance, high adhesive strength and wonderful electric, light, magnet and heat characteristics.
纳米涂层、纳米涂料具有良好的耐磨性、抗老化性、高粘接强度以及奇特的电、光、磁、热等性能。
The adhesive strength of the acid film was stronger than that of the alkali film.
碱性镀层的结合强度优越于酸性镀层。
The soil adhesive strength is mainly composed of capillary pressure and viscous resistance of the water film, which are affected by the nature of solid surface.
土壤粘附强度主要由毛细管作用力和界面水膜粘滞力构成，固体表面性质对其产生影响。
The viscosity, bulk and adhesive strength were tested.
测试了胶粘剂的本体强度、粘接强度和粘度。
A new method was explored to make a new type bioactive graded coating on titanium alloy for medical use and to improve its adhesive strength and stability.
本工作的目的是探索制备钛合金表面生物活性梯度涂层的新方法，提高涂层的结合强度及稳定性。
It is studied that the main influence factors on adhesive strength of CR adhesives, including mixed rubber, solvent, resin etc.
前言：研究了影响氯丁胶粘剂拉伸强度主要因素，探讨了混炼胶、溶剂、树脂等对氯丁胶粘剂拉伸粘接强度的影响。
The result showed that this adhesive has advantage of high initial adhesive strength, good low temperature storage stability and low cost.
结果显示：该胶具有初粘性强，良好的低温储存稳定性及成本低廉等优点。
Dielectric barrier discharge (DBD) can be applied to modify polymer surface to improve its wettability and adhesive strength.
介质阻挡放电(DBD)处理聚合物表面可有效提高其亲水性和结合强度。
The adhesive strength of the films to the substrates, diamond-coated tool wear and surface roughness of the workpiece were further studied by turning glass fiber reinforced plastic cylindrical bars.
通过玻璃纤维增强塑料的车削试验，研究了薄膜与基体之间的附着强度、涂层刀具的磨损和加工工件的表面粗糙度。
The effects of coupling agent, filler and toughening agent on adhesive strength were also studied.
还研究了偶联剂、填料和增韧剂等对粘接强度的影响。
The results showed that the influence of UV light on adhesive property was great, and protection can slow the deterioration of adhesive strength of CFRP and concrete.
结果表明，紫外线对CFRP与混凝土的拉伸剪切强度影响较大，防护能有效缓减CFRP与混凝土的正拉粘结性能在紫外线作用下的劣化。
Testing the setting time, flexural strength, compressive strength, water retention, adhesive strength of gypsum with the adhesive agents.
对掺加粘结剂的脱硫石膏的凝结时间、压折强度、保水性能、剪切粘结强度的测试。
The results show that the adhesive strength between the SRP and the PVC and the mechanical properties of the PVC/SRP composites are improved after the SRP was treated with plasma.
结果表明，胶粉等离子体改性后，不仅提高了胶粉与PVC之间的粘接强度，而且提高了PVC/SRP复合材料的力学性能。
It was proved that high velocity arc spraying Ni-Al coating is one of best intermediate coatings with high adhesive strength and fine structure.
高速电弧喷涂镍铝涂层结合强度高，涂层组织致密，是优良的打底涂层。
This resin is a kind of perfect adhesive which has high adhesive strength and good thermal resistance, can resist corrosion from all organic solvents and can resist acid and alkali.
该树脂是一种粘结强度高、耐热性好、能抵抗所有有机溶剂的腐蚀、能耐酸碱的理想粘结剂。
After the carbon fiber's surface treated, the interfacial adhesive strength of the composites increased greatly and the effect of treating with acetone is better than that with heat.
碳纤维布经过表面处理后与聚苯硫醚的粘接强度大大提高，其中用丙酮浸泡的效果好于高温热处理；
Stable spraying process and uniform and compact coating with high adhesive strength can be obtained by using the expert controller.
研制的等离子喷涂专家控制器可实现对常用喷涂粉末的稳定喷涂并获得均匀致密和高结合强度的等离子涂层。
应用推荐