Tighten the disc height adjusting screw.
压紧盘片，调整螺旋高度。
The high step moves from under the adjusting screw.
高点从调节螺钉下移动。
The high step moves from under the adjusting screw.
使高点从调节螺钉下移动。
The adjusting screw rests on the high step of the CAM.
调节螺钉落在凸轮高点上。
Heavy duty adjusting screw. Adjusting screw is both slotted and knurled.
重型调节螺丝。调节螺丝既有槽也有花纹边。
To lower the reduced pressure - turn the adjusting screw counterclockwise.
如果要降低水压，则逆时针方向旋转调节螺丝。
To clean or replace parts; shut off supply, loosen lock-nut and back off adjusting screw.
如果要清洗或更换部件，关闭供应管道，松开锁紧螺母，退出调节螺丝。
The upper end of the adjusting screw (7) is provided with a frustum-shaped valve needle (6).
所述调节螺杆(7)的上端具锥台形阀针(6)。
If the machine parts don't have adjusting screw caps, then it can be solved by turning the head covers.
如果机构是没有调整螺盖的，可用车削端盖的方法来解决。
Adjusting screw for outlet gas pressure is set on reducer; it can adjust working pressure for requirements.
减压器上设有出气压力调整螺钉，通过调整出气压力螺钉来调节喷气阀所需求的工作压力。
To raise the reduced pressure - slowly turn the adjusting screw clockwise until the system gauge indicates the pressure required.
如果要升高减少的水压，则慢慢顺时针方向旋转调节螺丝直到系统压力表指示达到所需压力为止。
The clutch is composed of a clutch body, a support bearing of the body, a steel ball seat, a steel ball, a guide column, a spring and an adjusting screw.
该离合器由离合器本体、本体支承轴承、钢珠座、钢珠、导柱、弹簧和调整螺钉组成。
It can be adjusted by the adjusting screw caps located on the head covers of both sides. Loose the locking screws beforehand, then re-tighten them after.
可通过两侧端盖上的调整螺盖来进行，调整前应松开紧定螺钉，调整后拧紧。
If valve clearance needs to be adjusted, loosen the locknut on rocker arm adjusting screw. Turn adjusting screw until feeler gauge slips with a slight drag.
如果气门间隙需要调节，松开摇臂调节螺丝上的防松螺母，转动调节螺丝直到测隙规滑动时稍带阻力为止。
The switch position of butterfly disc is limited by the adjusting screw pole on the worm gear transmission device. The indicating device displays the position of the valve switch.
蝶板的开关位置都由蜗轮传动装置上的调节螺杆限位，指示牌指示阀的开关位置。
The utility model can increase the swing assisting Angle and the swing assisting strength through adjusting the central adjusting screw bolt to meet the requirements of different patients.
它通过调节中心调节螺杆可增加助摆角度和助摆力量，以适应不同患者的需要。
The utility model relates to a super flat ruler which is composed of adjusting screw rods, a fixed support, a screw, a super flat plate, a super flat ruler, a horizontal scale and a bracket.
本实用新型涉及一种超平尺，它由：调整螺旋杆、固定托、螺钉、超平板、超平尺、水平标、支架构成。
Three types of adjustable turning rolls: manual lead screw adjusting, manual bolt shifting and electric sliding plate shifting.
三种可调式滚轮架：手动丝杆可调式、手动螺栓移位式和电动滑板移位式。
The squeezing stress between the valve end the screw for adjusting valve clearance must be taken into account in designing high speed valve train.
高速配气机构设计中一个不可忽视的薄弱环节是气门间隙调整螺钉头部的挤压疲劳。
This paper presents the customized equipment suitable to screw "adjusting bolt module" in "cover sheet assembly (preassembly)" for automobile assembling process.
介绍了一种自行研制的装配专机，适用于汽车“盖板总成(预装配)”中将“调整螺钉总成”拧进“盖板总成”的装配工序。
Cardboard size adjustment adopts screw roller adjusting system, one man operating, simple and fast.
纸板尺寸调节采用丝杆调整机构，一人操作，简易快速。
The sludge residence time in the screw press and thus the filtration time can be adjusted to individual requirements by adjusting the rotational speed of the screw shaft.
污泥停留在螺旋压力机的时间，（即）过滤的时间可以根据实际情况通过改变螺杆轴转的速调整。
Low table by adjusting the outlet pressure control screw.
调节螺钉落在凸轮高点上。
The screw fixing hole and the screw adjusting holes are tapered counter bores.
螺钉固定孔、螺钉调节孔为锥形沉孔。
By adjusting the screw speed of the twin-screw extruder, temperatures of different heating stages, the optimal processing conditions for grafting reactions are determined.
通过调整双螺杆挤出机的螺杆转速、不同加热段的温度，确定了接枝反应的最佳工艺条件。
The invention broadens the adjusting range of the axial pulsation intensity so as to better meet the demand of screw rod axial pulsation of the squeeze machine.
本发明扩大了轴向脉动强度的调节范围，从而可以更好地满足挤出机螺杆轴向振动的要求。
The utility model provides a novel supporting pulling device which is provided with a screw rod connected with the center of an adjusting supporting body through inner threaded holes.
本实用新型提供了一种新颖的顶拔器，它有一根螺杆与调节支承体的中心内螺孔联接。
The distal of the radius distal palmar anatomical steel plate is provided with two screw adjusting fixing holes, and the top end of the distal is provided with a screw fixing hole.
钢板远端设计有两个螺钉调节固定孔，远端顶端设计有一个螺钉固定孔。
Construction features and design method of hydraulic rope adjusting devices are presented according to defects existing in nut screw pair rope adjusting devices.
针对以往螺母丝杠副调绳装置所存在的缺陷，介绍了液压调绳装置的结构特点及设计方法。
Therefore, this method is not appropriate as a single-screw adjusting parameters means.
因此，这种方法不宜作为单螺杆泵调整参数的手段。
应用推荐