This article concludes the after-treatment process of linen fabric and the questions during the production.
总结了亚麻织物后整理工艺的制定措施以及在实际生产中所应该注意的问题。
The after-treatment process is easy for operation and the labor hardship is lower; and the purity of the product is high and the quality is better.
本发明提供的后处理工艺操作简便、工人劳动强度低，产品收率高、质量好。
The AFEX process is "dry to dry" : biomass starts as a mostly dry solid and is left dry after treatment, undiluted with water.
AFEX工艺是一种从“干原料到干产品”的过程，也就是说，原料本身基本上是干燥的固体物质，而处理之后还是干燥的，因为整个过程不许用水稀释。
Sampling should be performed after each step in the treatment process and from each point of use.
应在处理过程中的每个步骤之后以及每个用点处进行取样。
The basic process of surface treatment can be divided into three stages: pretreatment, middle after processing.
表面处理的基本过程大致分为三个阶段：前处理，中间处理和后处理。
After an analysis on the failure diagnosis of axial flow fans, the paper explains the process of the diagnosis and treatment plans.
文章通过对轴流式风机故障诊断的分析，论述了轴流风机的故障诊断过程和处理方案。
After that analyzes the framework of urban traffic emergency management system, proposes the process of urban traffic emergency incidents emergency treatment.
接着浅析浅析了城市交通应急管理系统的基本框架，阐述了突发事件城市交通应急处理的流程。
The micro flocculation direct filtration process is selected to treat the industrial wastewater from the power plant so that the wastewater after treatment can be reused as cooling water.
本实验选择微絮凝直接过滤技术处理电厂中的工业废水，使其经过处理后能被作为冷却水加以回用。
The systematic treatment process for rehabilitation after motor functional disorders was studied.
对运动性功能障碍后的康复治疗过程进行了系统的研究。
The first standard in GB8978-1996 can be attained after wastewater is treated with active phosphorus wastewater treatment process.
主动式黄磷废水处理工艺能使黄磷废水经处理后达到GB8978 1996规定的国家一级排放标准。
By depth filtration of suspended material in effluent after treatment using contact filtration process, the total Zn and Cd concentration in the effluent discharge can be dropped to 1.
通过接触过滤技术在冶金化工污水处理工艺中的应用，对处理后浓密废水所含悬浮物进行深度过滤，使处理后排放废水中的总锌、总镉浓度分别降到1。
Its operation shows that the process is rational in design and the clear water after treatment is colorless, odorless and limpid, reaching the state standard for acid waste water discharge.
根据运行情况，表明该工艺设计合理，处理后清水无色、无味、透明，达到国家酸性废水排放标准。
Research shows that HBV genotypes may and disease process, after infection clinical manifestations, prognosis and antiviral treatment response, and so closely related.
国内外研究表明，HBV基因型可能与疾病进程、感染后临床表现、预后和抗病毒治疗应答等密切相关。
Pellet coagulation is a new concept of water treatment technology and a new kind of water purification process proposed after thorough investigation.
结团凝聚是在对传统凝聚絮凝工艺进行了深入细致研究之后提出的水处理新概念和新工艺。
The deep sleep after the treatment immediately showed the strong impact of this health improving process.
理疗后的深度睡眠立刻显示出健康改善过程的巨大影响。
Process of biochemical wastewater treatment, general situation and operation after treatment of liquefied petroleum gas bulk plant are adumbrated.
文章简单介绍了液化石油气储灌场的废水生化处理的工艺流程、改造后的工程概况和操作运行。
The existing refinery wastewater treatment process was optimized by replacing the membrane bioreactor (MBR) after the contact oxidation tank.
对炼油废水处理场现有工艺进行流程优化，将MBR装置调整在接触氧化池之后运行。
After modification of the existing treatment process of petrochemical sludge, factors affecting the effect of centrifugal dewatering are analyzed to determine that the sludge treatment amount is 8.
独山子石化公司对原有石化污泥处理工艺进行了离心脱水技术改造，对影响离心脱水效果的因素进行了分析，确定了离心脱水法污泥处理量为8。
And after the treatment of this process, the supported Cu kieselguhr could be reused, or could be used as the effective catalysts in the organic oxidation reaction.
负载铜硅藻土在除钒处理后，可以再生，或作为有机催化氧化反应的有效催化剂。
After that, by analyzing the fault types and parameters of operation state for wastewater treatment on activated sludge process, a fuzzy expert system for fault diagnosis is designed in detail.
接下来，本文通过对活性污泥污水处理工艺的故障和运行参数的分析，对污水处理故障诊断模糊专家系统进行了详细设计。
This paper introduces the main restoring treatment plan, technical request and construction process after the plumb-line of dam safety monitoring system was broken in Feilaixia Hydro Project.
文中介绍了飞来峡大坝安全监测系统倒垂线断裂后主要的修复处理方案、技术要求和施工过程，为水利工程中类似问题提供参考。
In additions the paper qualitatively analyses the influence of residual stresses occurring after quenching and tempering and the process of heat treatment on the formation of the cracks.
此外，还定性分析了淬火、回火后残余应力的性质及热处理工艺过程对裂纹形成的影响。
Objective Application mini titanium board regular treatment condylar process fracture, observe the clinical effect after operation.
目的：应用微型钛板内固定治疗髁突骨折，观察手术后的临床效果。
The effect of different heat treatment process parameters on mechanical properties of LD10 alloy after forging was investigated.
研究了不同热处理工艺参数对LD 10合金锻造后力学性能的影响。
After the heat treatment process was improved on, factors inducing part to crack were decreased, the quenching of part became easy to operate and the heat treatment quality of part was ensured.
对热处理工艺改进后，减少了诱发零件开裂的因素，降低了淬火操作的难度，保证了该零件的热处理质量。
The effects of heat treatment process and different treat methods were studied and analyzed, and the mechanical properties before and after treatment were studied and analyzed as well.
研究并分析了热处理工艺及不同处理方式对试验结果的影响及力学性能在处理前后的变化。
Straightening of the shaft after heat treatment is a key process.
在轴杆类零件生产过程中，热处理后校直是一道关键工序。
In this process, under the mild reaction condition, the three wastes can not be produced with easy manipulation and after-treatment, and short reaction time.
合成反应条件温和，反应时间较短，操作简便，后处理过程简单，无三废产生。
After blender liner's low life was analyzed, a method is brought forward involved alloy ingredient and heat treatment process, according to material's performance and working condition.
本研究从工况材质两方面分析了搅拌机衬板使用寿命颇低的原因，针对工况对衬板材质性能的要求，在合金元素和热处理工艺两方面做出改进。
After blender liner's low life was analyzed, a method is brought forward involved alloy ingredient and heat treatment process, according to material's performance and working condition.
本研究从工况材质两方面分析了搅拌机衬板使用寿命颇低的原因，针对工况对衬板材质性能的要求，在合金元素和热处理工艺两方面做出改进。
应用推荐