The author analyzes common ways to inspect the air throttle position sensors of linear variable resistor 'switching and decoding.
对线性可变电阻型、开关型、编码型节气门位置传感器常用的检修方法进行分析和探讨。
It is discovered through experiments that there is bad effect in the movement when it opens wide the air throttle recirculation thus controls circulates the gate to open again below 30%;
试验发现运行中开大再循环风门的不良影响从而控制再循环门开度在30%以下；
Enough air-found mixture can seep around the throttle value and through the idle system to maintain the dieseling.
足够的空气发现混合可以渗透周围的节流阀值和通过怠速系统来维持柴油。
It also minimises the pumping losses caused by no longer having to "throttle" (ie, strangle) the air flowing into the cylinders in order to control the engine speed.
这样还把由于不必再为了控制引擎转速来抑制空气流入引起的抽吸效应的能耗最小化。
Air enters the engine through the air cleaner and proceeds to the throttle plate.
空气通过空气滤清器进入发动机，并进入节气门。
Air inlet throttle valve with pneumatic actuator and positioner.
空气进气节流调节阀：带有气动定位和执行机构。
You control the amount of air that passes through the throttle plate and into the engine with the gas pedal.
通过油门踏板，你能控制经过节气门进入发动机的空气量。
Smooth operation of throttle linkage and throttle body air valve.
节流连杆和节流体空气阀的平稳操作。
The result showed that the dynamic characteristics of the air spring with auxiliary chamber are interrelated observably to the size of the throttle orifice.
研究结果表明：空气弹簧动态特性与节流孔孔口大小有着明显的关系。
The results show that shape of the air cell, properties of the material, volume of the appended gas chamber and diameter of the throttle hole are main factors affecting the dynamics of air springs.
结果表明，空气弹簧气囊外形及材料特性、附加气室容积和节流孔直径是影响空气弹簧性能的主要因素。
The Throttle body provides surfaces for mounting between the Motorcycle's air intake duct and the engine intake manifold.
风门表面留有安装摩托车进气管和发动机进气歧管的位置。
The intake snorkel, or the opening for the intake air to enter the system, must be large enough to ensure sufficient air is available to the engine under all conditions from idle to full throttle.
浸渍的摄入量，或者打开发动机进气空气进入系统，必须保证孔足够大以确保有足够的空气可以在引擎的所有条件从怠速到全油门。
Adding air pressure within the annular space between the housing and sleeve can throttle, or close the valve.
在阀体外壳和套管之间的环形空间内施加气压，即可实现阀门的节流和关闭功能。
An air duct will mount to the Throttle body assembly air intake snout. The snout lip dimensions are defined on the Throttle body assembly outline drawing.
气管加装在风门装配进气口上。进气口尺寸如风门装配轮廓图所示。
A component, such as an intake manifold or a throttle body, has an air passage.
一种部件，例如进气歧管或节气门本体，具有空气通道。
As a result, the mixture controlled by the throttle valve (11) contains partly air and partly vaporised fuel.
结果，由节气门(11)控制的混合物包含一部分空气，一部分汽化燃料。
The throttle valve will accordingly be wider open, for any particular power output, than it would be if it controlled only combustion air.
从而，对于任何特定功率输出， 节气门都比只由燃烧空气控制时的情形要开启得更大。
The throttle body is usually located between the air filter box and the intake manifold, and it is usually located near the mass airflow sensor.
节气门体之间通常是位于空气滤清器箱和进气歧管，通常是位于大规模气流传感器。冷空气摄入量和它如何运作的。
A throttle valve (11) controls the amount of air admitted to the combustion chamber.
节气门(11)控制进入燃烧室的空气量。
The air filter is usually located in the air stream to your throttle valve assembly and intake manifold.
空气滤清器通常位于空气流到你的节流阀总成和进气歧管。
So that, theoretical basis for the design of the multi-throttle air-lubricated hydrostatic slide guide is offered in this paper.
为表面复合节流方式的静压导轨的设计提供了一种理论计算方法。
Another advantage to having a cold air intake is improved throttle response and fuel economy in most cases.
另一个优点是有一个寒冷的进气改善燃油经济性的油门响应，大多数人都功亏一篑。
Throttle body. The throttle body is the part of the air intake system that controls the amount of air flowing into an engine's combustion chamber.
节气门体，同时就节气门体的进气系统的一部分，控制适当的气流流动到发动机的燃烧室。
The carrying capabilities under three active throttle modes of air inlet, air exhaust and air inlet-exhaust are given.
给出了进气、排气、进气-排气三种主动节流方式下的承载能力特性。
Throttle flange is used for throttle installation; it's welded on the main air intake pipe of engine to connect with throttle.
节气门安装法兰主要用于节气门的安装，节气门安装法兰焊接在发动机的进气总管上方以方便节气门和发动机的进气总管的连接。
Throttle flange is used for throttle installation; it's welded on the main air intake pipe of engine to connect with throttle.
节气门安装法兰主要用于节气门的安装，节气门安装法兰焊接在发动机的进气总管上方以方便节气门和发动机的进气总管的连接。
应用推荐