In this paper, the microstructure and properties of new type Mg-Al-Zn alloys were mainly studied.
本文着重研究了新型镁铝锌合金的组织及性能。
The composition and forming mechanism of black strips on Al-Zn-Mg-Cu hot rolled plates were studied.
研究了热轧高锌合金板材表面黑条缺陷的成分、产生机理及消除方法。
The properties and section corrosion features of steel sheet coated with Al-Zn alloy plating were analyzed.
介绍了覆铝锌板的镀层性能特征以及切口的腐蚀状况。
The adherence characteristics have been investigated by measurement of adherence strength of Al-Zn alloy coated steel enamel samples.
通过对覆铝锌钢板搪瓷样品的密着测试，研究了搪瓷的密着性能。
Since its special microstructure, the corrosion-resistant performance of Al-Zn steel sheet is 2~6 times better than that of the traditional galvanized steel sheet.
由于其独特的微观结构，镀铝锌钢板的防腐能力比镀锌钢板高2～6倍。
Metallic elements such as Fe, Cu, al, Pb, Na, Zn, Sn and Cd etc. would influence the stability of grape wine.
影响葡萄酒稳定性的金属元素有铁、铜、铝、铅、钠、锌、锡和镉等。
The high al, Zn base alloy conical gear with straight tooth in squeezing casting can ensure an accuracy of tooth face.
利用挤压铸造技术生产高铝锌基合金直齿圆锥齿轮，齿面精度能够得到保证。
ChimgMing has engaged with metal manufacturing for more than three decades, main business is producing Die Casting parts of al, Zn, mg and precision metal parts.
我司从事金属零件的生产已三十多年，现主营铝、锌、镁压铸件和五金精密零配件。
The results show that the wear resistance of built up welding surface of Zn based al alloys are better than that of matrix under the same conditions.
结果表明，在相同条件下，锌铝合金堆焊层的耐磨性高于同种材料母材的耐磨性。
The ultrasonic dilution mechanism was analyzed through studying the fabrication process of the Zn-Al alloy matrix composites by high-intensity ultrasonic dilution of XD composites.
对高能超声稀释原位反应烧结块制备锌铝合金基复合材料过程进行了研究，简要分析了超声稀释机理。
The squeezing casting of Zn-Al alloy merges the advantage of casting and forging and has the broad development under the situation of more and more high demand to casting quality.
锌铝合金挤压铸造结合了挤压铸造和锌铝合金的优点，在当今对铸件质量要求越来越高的形势下，具有广阔的发展前景。
Based on Zinc and Zn-Al alloy mechanical plating, a new Zn-Ni alloy mechanical plating process is developed through adjusting type and dosage of activators and promoters.
在机械镀锌、锌铝工艺的基础上，通过调整活化剂和促进剂的种类及用量，研制开发了机械镀锌镍合金工艺。
The study of mechanical performance and manufacturing process of ZA series Zn-Al alloy are discussed in detail.
本文较详细论述了ZA系列锌铝合金力学，物理性能，制造工艺的研究。
The mold structure and making technology of using high-intensity Zn-Al alloys in squeeze casting is simple, reliable, low cost, having good economic benefits.
挤压铸造高强度锌铝合金齿轮模具结构、制造工艺简便可靠，生产成本低，经济效益高。
The Zn-Al alloy has many advantages, such as good mechanical property, strong antifriction property, processable property, small density, low melting point, affluent raw material, low cost and so on.
高铝锌基合金具有优良的力学性能、耐摩性能、机加工性能、以及密度小、熔点低、原材料来源丰富和成本低等优点。
The protection length of the Zn-Al alloy anode of 15.
经计算，锌铝合金阳极的保护距离为15 。
This product is made of fine carbon structural steel with its surface coated by rare-earth Zn-AL alloy.
该产品采用优质碳素结构钢，表面镀稀土锌铝合金制造而成。
The mold structure and making technology of using high-intensity Zn-Al alloys in squeeze casting is simple, reliable, low cost and also having good economic benefits.
挤压铸造高强度锌铝合金齿轮模具结构、制造工艺简便可靠，生产成本低，经济效益高。
The white corrosion products on hot dip Zn al alloy coating exposed to seawater in dynamic aerated immersion were investigated by means of XRD and TEM.
采用XRD和TEM对热浸锌铝合金镀层在动态充气海水全浸试验时所形成的白色腐蚀产物进行了研究。
By using this new process, Zn-Ni and Zn-Al-Ni alloy coatings with different proportions on steel substrate are obtained.
利用该工艺在钢基表面上得到了不同配比的锌镍以及锌铝镍合金镀层。
The influence of mixed refining agent on the microstructure and mechanical properties of four different Al-containing high aluminum Zn-based alloys at room temperature was studied.
研究了混合细化剂对四种不同铝含量的高铝锌合金室温下组织和力学性能的影响。
Zn base, Al base, and Mg base anodes, auxiliary anodes, reference electrode materials and etc.
锌阳极、铝阳极、镁阳极、辅助阳极材料、参比电极材料等。
There is abnormal bottom shrinkage in Zn Al alloy castings and top riser has little effect on them.
锌铝系合金铸造时出现反常的底部缩孔，而用一般上置式冒口对此类缩孔的补缩效果甚微。
This product is made of fine carbon structural steel with its surface coated by rare-earth Zn-Al alloy.
该产品采用优质碳素结构钢，表面镀稀土铝合金制造而成。
The features in the surface structure of Zn-Al (5%Al) hot dip galvanized sheet and their origins are analyzed.
主要分析了含铝约5%的锌铝合金热镀锌钢板的表面结构特征，并对其结构特征的形成原因进行了分析。
Usually, excellent Superplasticity of Zn-Al eutectoid alloy could be obtained by pre-deformation (rolling or forging).
锌铝共析合金具有良好的超塑性，但通常需要经过预变形(轧制或锻压)来得到。
The results showed that both pre eutectic Zn rich phase and Al rich phase have the same features of instantaneous nucleation but have different characteristic growth.
结果表明，先共晶富锌相和先共晶富铝相都具有瞬时形核特点，但生长规律不同。
Organic-inorganic granular fertilizer made of chicken manure powder plus N, P, K chemical fertilizers and microelements B, Zn, Mn, et al.
利用鸡粪为主体原料配以N、P、K化学肥料和硼、锌、锰等微量元素制成便于贮藏、运输和使用的有机-无机颗粒肥。
Organic-inorganic granular fertilizer made of chicken manure powder plus N, P, K chemical fertilizers and microelements B, Zn, Mn, et al.
利用鸡粪为主体原料配以N、P、K化学肥料和硼、锌、锰等微量元素制成便于贮藏、运输和使用的有机-无机颗粒肥。
应用推荐