Lead used as an alloying element in steel.
钢铁中用作合金元素的铅。
An alloying element that is used in stainless steel to deter corrosion.
不锈钢中的一种合金元素，具有抗腐蚀特性。
Brass is a kind of copper alloy which USES zinc as the main alloying element.
黄铜是以锌为主要合金元素的铜合金。
A similar technique is to "glue" the small percentage of alloying element onto the iron powder.
另一种类似的技术是把小百分比的合金元素“粘合”到铁微粒上。
The interfacial diffusion of alloying element is important to microstructure, microhardness and interfacial bonding strength.
合金元素在界面两侧的扩散是影响材料显微组织、显微硬度及界面结合强度的关键。
In this paper, the influence of alloying element on the oxidation resistance and wettability of low tin solders is investigated.
研究了合金元素对含稀土低锡钎料抗氧化性和氧化前后润湿性能的变化。
Magnetic stainless steels that have a low carbon content and contain chromium as the main alloying element, usually between 13% and 17%.
有磁性的不锈钢碳含量较低，铬是其中主要的合金元素，通常含量为13%到17%。
The interfacial diffusion of alloying element is an important factor to microstructure, apparent hardness and interfacial bond strength.
元素在界面两侧的扩散是影响材料显微组织、表观硬度及界面结合强度的关键。
It is shown that the microstructures, alloying element distribution and magnetic conductivity of P tude remarkably differ from those of s tube.
结果表明，两种渗碳管的组织、合金元素分布及导磁性存在着显著差别。
The effect of alloying element on the graphitization was analyzed on the basis of thermodynamics. Deformation can accelerate the rate of graphitization.
从热力学角度分析了元素对石墨化的影响，得出变形可促进石墨的形成。
The effects of alloying element phosphorus on microstructure and properties of sintered compacts of short cast iron fibres has been studied in this pa-per.
研究了合金元素磷对铸铁短纤维烧结体显微组织和性能的影响。
After tempering treatment at different conditions, the tempering stability of Fe-base hardfacing layer containing multiple alloying element was investigated.
研究了高碳高铬铸铁型硬质合金堆焊层在不同热处理工艺条件下的组织、硬度与耐磨性。
In the condition of industrial production, orthogonal test and slab rolling comparison test were had by adding different rare earth element and alloying element.
在工业生产条件下，通过添加不同的稀土元素和合金元素进行正交试验及板坯轧制对比试验。
Chromium can improve the oxidation resistance and corrosion resistance of steel, so it is an important alloying element in stainless steel and heat-resistant steel.
铬又能进步钢的抗氧化性和耐腐蚀性，因此是不锈钢，耐热钢的重要合金元素。
Copper is the principal alloying element of aluminium alloy. Accurate and quick determination of its content is very important for research and production of aluminum alloy.
铜是铝合金中的主要合金元素，准确、快速测定其含量对科研与生产具有重要意义。
The present results confirmed that the composition and properties of a deoxidation product are mainly determined by the affinity between the alloying element used and oxygen.
上述结果肯定了脱氧产物的成份和性质，主要取决于所加合金元素与氧的亲和力。
The experimental results show that alloying element content influence the austenitic stability of stainless steel. The lower the element content, the poorer the austenitic stability.
研究结果表明：不锈钢丝合金元素对316 l奥氏体的稳定性有显著影响。
In regard to non wear resistance of the white iron shot in the practical application process, alloy iron shot have been produced by means of adding alloying element and proper heat treatment.
针对白口铁丸在实际应用过程中不耐磨易破碎的现象，在白口铸铁中通过添加合金元素及适当热处理等手段生产合金铁丸。
This paper has investigated the influence of alloying element Nb on structure and properties of the soft nitriding layer by means of experiments of the matrix steels containing Nb and Nbfree.
通过含铌与不含铌基体钢气体软氮化工艺对比实验，初步探索了合金元素铌对基体钢软氮化渗层组织与性能的影响。
The experimental results show that the alloying element content of a hardened steel and its hardness have a remarkable influence on the tool life. The hardened carbon steel has the best machinability.
研究结果表明，淬火钢的合金元素含量和硬度对刀具的耐用度均有明显的影响，淬火碳钢的可加工性最好；
According to the production practice and advanced technology at home and abroad, alloying process of Si element is discussed in respect of Si characteristic in aluminium alloy.
针对铝合金元素硅的特点，结合生产实际和目前国内外先进技术，对元素硅的添加工艺进行了探讨。
The effect of multi element alloying on the microstructure and properties as cast of high chromium white cast iron has been studed.
本文研究了多元合金对高铬白口铸铁铸态组织和性能的影响。
The results show that rare earth element La helps to improve the microstructure of nitrided layers by way of micro alloying effect which is dependent on its permeation into the nitrided layers.
试验结果表明，含镧的氮化层的韧性和抗冲蚀磨损性能明显优于普通氮化层。
It elucidates the construction of fuse element and its materials, the location of alloy of eutectic alloying effect (M-effect), kind of sand filled and choice of cartridge material.
阐述当前这种熔断器熔体的结构和材料，冶金效应合金的布置，填料的种类以及外壳的选用。
It elucidates the construction of fuse element and its materials, the location of alloy of eutectic alloying effect (M-effect), kind of sand filled and choice of cartridge material.
阐述当前这种熔断器熔体的结构和材料，冶金效应合金的布置，填料的种类以及外壳的选用。
应用推荐