The invention is usable for aluminium and aluminium alloy casting industry.
本发明适用于铝及铝合金铸造行业。
This lamp of outer covers adopt the aluminium alloy casting, the dense structure of water, aesthetic in appearance. The security is excellent.
该灯外壳采用铝合金浇铸，水密结构，外型美观，安全性好。
The paper describes the application of laser technology for aluminium alloy casting metal level automatic control and the effect in quantity of slab.
介绍激光技术在铝合金铸造过程中液位自动控制方面的应用，以及对提高扁锭质量的作用。
The hydrogen content and processing edge cracks was one of the important facts that effected the quality of 5005 aluminium alloy casting-rolling strips.
熔体质量和工艺裂边是影响5005合金铸轧产品质量的重要因素之一。
The service condition of aluminium alloy casting dies are analysed in this paper. The test of vacuum heat treatment process by high pressure gas quenching for the dies have been carried out.
分析了大、中型铝合金压铸模的工作条件，进行了真空高压气冷热处理工艺的试验研究，选出了适宜的工艺参数，并应用于生产。
About half of all aluminium castings are made using high-pressure die-casting (HPDC), in which a molten aluminium alloy is injected under pressure into a steel mould, or die.
大约有一半的铸铝工艺是高压模铸(HPDC)，在这种工艺中，通过压力将液态铝合金注入钢模，或模具。
Good quality aluminium-alloy shell casting I produced by pouring test.
通过热态浇注试验，得到了质量良好的铝合金壳体铸件。
The solid/liquid phase transformation of ZL201 aluminium alloy in near liquidus semi-continuous casting was simulated using multiscale simulation technique.
用多尺度模拟方法研究了近液相线半连续铸造中的ZL201合金的液/固相变。
A new kind of aluminium alloy with satisfactory resistivity and good casting properties and good mechanical properties for motor rotors with high torque and high slip is found.
为高转矩、高转差率的电机转子找到了一种既满足电阻率要求，又具有好的铸造性能和好的力学性能的铝合金配方。
From quality of melting metal, casting condition and casting equipment, the influence factors of crack in aluminium and its alloy slab ingot were analyzed, some suggestion have been drawn out.
从铝及铝合金的熔体质量、铸造条件和铸造设备三个方面，分析了对铝及铝合金扁锭裂纹影响的诸要素，并提出避免裂纹的措施。
The experiment results show that adding compound purification devices to the electromagnetic continuous casting technology can improve the qualities and properties of aluminium silicon alloy billets.
实验结果表明：在铝硅合金电磁连铸过程中加入复合净化装置是可以提高铝硅合金铸坯的质量及性能的。
Intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure Casting.
通过低压铸造后固溶处理的方法，获得了网状金属间化合物增强铝合金表面复合层。
Casting aluminium alloy ZL305A is a new shipbuilding material with high strength, good ageing stability, excellent corrosion resistance.
本文介绍研制的新型铸造铝合金zl305a是一种强度高，时效稳定性好，耐蚀性优良的船用新材料。
Continous casting and extrusion (CASTEX) technology is adopted to produce 6201 electric aluminium alloy rod.
采用连续铸挤工艺生产6201电工铝合金线材。
Failure analysis of parietal cracking in scavenging pump made of die casting aluminium alloy was carried out by means of metallographic examination, SEM analysis and so on.
借助金相显微镜、扫描电镜等分析手段，对压铸铝合金清洗泵腔壁断裂失效的原因进行了分析。
Large area crack appearing on the surface of the aluminium alloy bakeware casting dies causes its early failure.
某厂铝合金烤盘压铸模因模面出现大面积龟裂而早期失效。
This paper mainly introduces the research on the substitution of Aluminium bar by rare earth, magnesium and silica alloy on the process of chemical capping to rimmed steel during casting.
文中主要研究稀土镁硅合金替代铝条应用于沸腾钢浇注的化学封顶工艺。
The factors including of melting-casting process, extrusion process, die, and extrusion device resulting in the surface streaks of 6063 aluminium alloy profiles were analyzed.
从熔铸工艺、挤压工艺、模具、挤压设备等方面分析了6063铝合金型材在挤压过程中产生表面条纹的原因，并提出了相应的对策。
This paper introduces emphatically a kind of chemical treatment process prior to the coating on the die casting pieces of aluminium-silicon alloy and its film adhesion.
着重介绍一种简单实用的铝硅合金压铸件涂漆前化学处理工艺及其漆膜的结合性能。
The characteristics of melting and casting process of 1A20 aluminium alloy were summarized.
总结了1A20铝合金熔铸方面的一些特点。
The solidification process and Characteristic in horizontal Continuous Casting of aluminium alloy is simply and theoretically analyzed in this paper.
本文对铝合金水平式连铸机的凝固过程及特点作了简要的理论分析。
The fluid flow phenomena happened in the mould of continuous casting of aluminium alloy was studied by digital particle image velocimetry(DPIV) technology.
利用先进的数字粒子图像测速技术（DPIV）对铝合金板坯连铸过程中结晶器内的流场进行研究。
A metal flow system, for use in casting aluminium alloy using a pressure casting machine, is provided by a component of a die or mould assembly, for the machine, which defines a die cavity.
金属流动系统，在用压力铸造铸造机使用铝合金，是由一个模具或模具装配组件，为这台机器，它定义了一个死腔。
A metal flow system, for use in casting aluminium alloy using a pressure casting machine, is provided by a component of a die or mould assembly, for the machine, which defines a die cavity.
金属流动系统，在用压力铸造铸造机使用铝合金，是由一个模具或模具装配组件，为这台机器，它定义了一个死腔。
应用推荐