Abstract: Through hardness testing, metallographic microscope analysis, and other means, the origination of crack failure of the aluminum alloy die casting die was analyzed.
摘要：通过硬度测试、金相组织观察，研究分析了铝合金压铸模具发生早期龟裂失效的原因。
Although space of slider depth in aluminum alloy die casting mold are larger than the minimum values proposed by several handbooks, sometimes they are too small for pulling core.
尽管铝合金压铸模的滑块宽度间隙大于一些手册推荐的最小间隙，抽芯卡滞仍然时有发生。
The advantages of housing parts with aluminum alloy substituting for zinc alloy have been described, focusing on the operation and key points of design of the aluminum alloy die casting die.
分析了箱体零件由锌合金改铝合金的优点，论述了模具的工作过程和设计要点。
Company has mold, injection molding, metal, aluminum alloy die-casting and other ancillary works.
公司下设有模具、注塑、五金、铝合金压铸等配套厂。
Shell aluminum alloy die-casting molding, high strength, high voltage electrostatic powder coating, corrosion resistance.
外壳铝合金压铸成型，强度高，表面高压静电粉末喷涂，耐腐蚀。
An aluminum silicon die cast alloy having a very low iron content and relatively high strontium content that prevents soldering to dies into die casting process.
一种铝硅模铸合金，具有非常低的铁含量和相对较高的锶含量，用来防止在模铸过程中焊接在模具上。
Material: high quality aluminum alloy die-casting molding, high-pressure cast aluminum lamp body. Pure silicone seal, tempered glass.
材料：优质的铝合金压铸成型，高压铸铝灯体。纯硅胶密封圈，钢化玻璃。
The hot dip aluminum has been carried out to research the formation and dissolution of the intermetallic layer between die casting die and aluminum alloy.
为了研究压铸模与铝合金金属间化合物的形成与分解过程，进行了热浸铝试验。
Ltd. is specialized in the production of zinc alloy and aluminum die casting, casting machining, die casting mold development and design, and die casting product assembly.
乐清市红烨通讯有限公司是专业从事锌合金和铝合金压铸生产，铸件加工，压铸模具开发与设计以及压铸件成品组装等。
The structural characteristics of aluminum alloy cover was analyzed, and the design of pouring system and die-casting die structure were introduced.
分析了铝合金端盖压铸件结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
Our company provides a package deal, including product research-and-development, mold design, aluminum gravity casting, die-casting, T6 heat treatment of aluminum alloy and machining.
公司提供产品研发、模具设计、铝合金重力铸造、压铸、铝合金T6处理、机械加工等整套生产工艺流程服务。
CAE analysis and orthogonal design are applied in aluminum alloy housing die-casting process optimization design.
采用CAE方法和正交分析法对铝合金支架压铸件的压铸工艺进行了优化设计。
The structural characteristics of the aluminum alloy tap part were analyzed, and the design of pouring system and die-casting die structure were introduced.
分析了铝合金水龙头零件的结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
The die construction, running principle and features, technological process flow, technique parameters and product performance of aluminum alloy integral naves by gravity die casting are described.
阐述了金属型铸造摩托车铝合金整体车轮的模具结构、工作原理及特点、铸造工艺流程、工艺参数及产品性能。
According to the enhancing service life of aluminum alloy die-casting part of the automobile gear box, carried on the failure analysis.
本文就提高汽车齿轮箱铝合金压铸件使用寿命，进行了失效分析。
Systematically analysed aluminum alloy wheel product structure and characteristic of mold design, and the advantage and feasibility of aluminum alloy wheel low pressure die casting technology.
系统分析了铝合金轮毂产品的构造和模具设计特点，并对铝合金轮毂低压铸造工艺的优越性和可行性进行了系统分析。
To customize various aluminum alloy die-casting needed, aluminum alloy extrusion product.
为客户量身定做所需要的各种铝合金压铸、铝合金挤出产品。
The die casting die with special structure for aluminum alloy thin disk was designed, and the structure features and operating principle of the die were described.
设计了一种特殊结构的铝合金薄圆盘压铸模，论述了模具结构特点和工作原理。该模具采用中心浇道，形成铸件通孔的型芯兼作分流锥。
Aiming at the structure features and technological requirements for EA111 aluminum alloy oil tank, an available design plan for die casting die was described.
针对EA111油底壳铝合金压铸件的结构特点及工艺要求，介绍了一种切实可行的压铸模设计方案。
Numerical simulation technology has been carried out to analyze the filling process of an aluminum alloy wheel produced by low pressure die casting.
利用数值模拟技术，对低压铸造铝合金车轮的流动、充型过程进行了分析。
Charactristics: Lampholder is made from die-casting strength aluminum alloy and the body from special alloy materials and the reflector from PC.
特点：该灯具灯座采用强力压铸铝合金制作，灯体采用专用合金材料，反光罩采用聚碳酸酯材料。
Production experiment shown that RE carbon-nitride improved the life casting die for aluminum alloy by t…
生产应用表明，该工艺处理铝合金压铸模使用寿命提高两倍。
The results show that the shape of the connecting rod of ADC12 aluminum alloy can be obtained by die casting, but its mechanical properties are very poor.
结果表明，利用压铸工艺虽然能实现ADC12铝合金连杆的成形，但成形零件的力学性能却较低。
Shanghai Shunfu Die-Casting Co. , Ltd. , located in No. 7955, Jinda Road, Feng Xian District of Shanghai, is specialized in production of aluminum alloy and zinc alloy die-casting parts.
上海舜富压铸制造有限公司，坐落于上海市奉贤区金大公路7955号，是一家中德合资企业，专业生产铝合金压铸件和锌合金压铸件。
Being a special die casting factory for aluminum alloy under the Shenzhen Glitter General Electric Co.
深圳高力特通用电气有限公司压铸厂是专业的铝合金压铸生产企业。
Frame structure is made of high quality aluminum alloy die-casting molding, beautiful appearance and strong.
抢救车主要框架结构采用优质铝合金压铸成型，外形美观坚固。
Frame structure is made of high quality aluminum alloy die-casting molding, beautiful appearance and strong.
抢救车主要框架结构采用优质铝合金压铸成型，外形美观坚固。
应用推荐