With the fabricated preforms, the pressure casting process of porous aluminum alloy was studied.
利用所制备的预制块，研究了多孔铝合金的加压铸造工艺。
The coating behavior of aluminum alloy lost foam casting ( LFC) process has been investigated.
研究了铝合金消失模铸造过程中的涂料行为。
Shell aluminum alloy die-casting molding, high strength, high voltage electrostatic powder coating, corrosion resistance.
外壳铝合金压铸成型，强度高，表面高压静电粉末喷涂，耐腐蚀。
The short fiber reinforced aluminum silicon alloy gradual composites are manufactured by squeeze casting, and the structures and the wear resistance of the composites are studied.
采用挤压铸造技术制备短纤维增强铝硅合金梯度复合材料，研究了这类材料的凝固组织和耐磨性能。
The equipment, mould structure and processing of manufacturing aluminum alloy handle stems of bicycle using extrusion casting method are presented.
介绍了挤压铸造制造铝合金自行车把立管的设备结构及工艺流程。
Company has mold, injection molding, metal, aluminum alloy die-casting and other ancillary works.
公司下设有模具、注塑、五金、铝合金压铸等配套厂。
Material: high quality aluminum alloy die-casting molding, high-pressure cast aluminum lamp body. Pure silicone seal, tempered glass.
材料：优质的铝合金压铸成型，高压铸铝灯体。纯硅胶密封圈，钢化玻璃。
Shell made of high strength aluminum alloy casting off the surface after blast cleaning by high voltage electrostatic spray.
壳体采用高强度合金铝一次性压铸成型，表面经高速抛丸清理后高压静电喷塑。
It is suitable for roughing to finishing machining of heat-resistance alloy, ti alloy, casting iron and aluminum alloy.
适用于耐热合金、钛合金、铸铁和铝合金的粗加工到半精加工。
The coating behavior of aluminum alloy lost foam casting (LFC) process has been investigated.
研究了铝合金消失模铸造过程中的涂料行为。
The hot dip aluminum has been carried out to research the formation and dissolution of the intermetallic layer between die casting die and aluminum alloy.
为了研究压铸模与铝合金金属间化合物的形成与分解过程，进行了热浸铝试验。
Our company provides a package deal, including product research-and-development, mold design, aluminum gravity casting, die-casting, T6 heat treatment of aluminum alloy and machining.
公司提供产品研发、模具设计、铝合金重力铸造、压铸、铝合金T6处理、机械加工等整套生产工艺流程服务。
Origination of casting defects in aluminum alloy motorcycle damping cylinder in metal mould casting was analyzed.
分析了金属型铸造铝合金摩托车减震筒铸造缺陷的产生原因。
The structural characteristics of aluminum alloy cover was analyzed, and the design of pouring system and die-casting die structure were introduced.
分析了铝合金端盖压铸件结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
Numerical simulation of filling and solidification of large aluminum alloy support frame in indirect casting was conducted based on FDM.
基于有限差分法，对大型铝合金支架间接挤压铸造充型和凝固过程进行了数值模拟。
Studied the annealing institution of 3003-o aluminum alloy strip for drawing is researched, while the chemical composition and casting, hot rolling, the cold rolling, process were determined.
研究了深冲用3003-o铝合金带材合理的生产工艺，在化学成分和铸造、热轧、冷轧工艺确定的情况下，试验研究成品退火工艺制度。
The advantages of housing parts with aluminum alloy substituting for zinc alloy have been described, focusing on the operation and key points of design of the aluminum alloy die casting die.
分析了箱体零件由锌合金改铝合金的优点，论述了模具的工作过程和设计要点。
The structural characteristics of the aluminum alloy tap part were analyzed, and the design of pouring system and die-casting die structure were introduced.
分析了铝合金水龙头零件的结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
The die construction, running principle and features, technological process flow, technique parameters and product performance of aluminum alloy integral naves by gravity die casting are described.
阐述了金属型铸造摩托车铝合金整体车轮的模具结构、工作原理及特点、铸造工艺流程、工艺参数及产品性能。
Under traveling magnetic field, casting ZL102 aluminum alloy thin-section castings' best process is: using stainless steel as bottom mold, voltage is between 220v-235v.
最终得到移动磁场下铸造ZL 102薄壁件的最佳工艺条件为：不锈钢底模，电压为220v- 235v。
Feeding effect can be improved with qualified casting using side riser gating system for plate or heavy concave aluminum alloy casting.
对于平板类、厚大凹型类铝合金铸件，采用边侧冒口的浇注系统，能提高铸件的补缩效果，生产出合格铸件。
Residual stress distribution for engine cylinder body made of casting aluminum alloy was investigated completely using X-Ray nondestructive detection method.
利用X射线无损检测方法，对铸造铝合金制造的某发动机汽缸体的残余应力分布进行了全面分析。
The special slot is adopted in the rotor of the induction machine with compound cage rotor and there is two materials of casting aluminum and copper iron alloy in the slot.
复合笼条转子感应电动机转子采用特殊的槽形，且槽中含有铸铝和铜铁合金两种材料。
The surface and inner qualities of aluminum alloy ingot by electromagnetic casting (EMC) have been investigated and compared with those of the direct casting (DC) one.
分析了电磁铸造铝合金铸坯的表面和内部质量，并与普通连续铸造铸坯进行了对比。
Abstract: Effects of vacuum degree and filling temperature on the casting length of A356 aluminum alloy wire prepared by vacuum suction casting were investigated.
摘要：采用真空吸铸法制备了A356铝合金丝材，并对充型温度和绝对真空度对丝材长度的影响进行了研究。
The internal quality of aluminum alloy castings that were produced by Vacuum Differential Pressure casting was studied with both theory and practice.
对用真空差压铸造法生产的铝合金铸件性能进行了研究，从理论和实践量方面论述了其较好的铸件内在性能。
In this paper, the effects of pressurizing value on aluminum alloy crystal structure and the mechanical properties in squeeze casting process have been studied.
本文研究了挤压铸造时不同加压压力对铝合金结晶组织和机械性能的影响。
The quality precision of the aluminum alloy in squeezing casting with electromagnetic pump quantitative pouring can reach up to 2%.
结果表明，电磁泵定量浇注挤压铸件质量精度达到2 %。
The quality precision of the aluminum alloy in squeezing casting with electromagnetic pump quantitative pouring can reach up to 2%.
结果表明，电磁泵定量浇注挤压铸件质量精度达到2 %。
应用推荐