Furthermore, the temporal curves of the maximal depression displacement are obtained by ANSYS LS-DYNA. The simulation results agree with those of the tests.
其次采用ANSYS LS - DYNA进行了仿真模拟，给出了凹陷变形的时程曲线，获得了与现场实验较一致的结果。
The anti-blasting and absorbing energy mechanisms of composite protective structure under blasting loads were numerically simulated by applying ANSYS/LS-DYNA.
采用ANSYS/LS-DYNA软件对复合结构各层中的爆破能量的分布进行了系统的数值模拟研究；
The double sides pressurized hydroforming process of metal sheet is numerically simulated by applying the commercial FEM software ANSYS/LS-DYNA.
应用商用有限元软件ANSYS/LS-DYNA，对板料的双向加压液压胀形过程进行了数值模拟。
Using ANSYS / LS-DYNA software, based upon the test results, the axial crash behaviors of the aluminum foam-filled circular tubes are analyzed.
采用ANSYS/LS-DYNA软件对空圆管和泡沫铝填充圆管受轴向压缩时的吸能特性进行数值模拟研究。
Therefore, based on rolling bearing implicit finite element solution analysis, using ANSYS/LS-DYNA explicit dynamic module implements, we achieved the rolling contact simulation of motion process.
因此本文在对滚动轴承有限元隐式求解分析的基础上，利用ANSYS/LS-DYNA模块对滚动轴承进行了显式动力学接触分析。
The parametric finite element model of the television with packaging structure was established and its dropping simulation was achieved using the finite element analysis software ANSYS/LS-DYNA.
利用有限元分析软件ANSYS/LS-DYNA，建立长虹电视带包装的参数化有限元模型，对电视裸机与带包装两种工况下的跌落仿真模拟和跌落实验；
The main contents and results of this paper as follows:Firstly, the drop simulation experiment has been carried out for the model of whole camera body by the analysis software, ANSYS/LS-DYNA.
本文以数码相机为研究对象，将其跌落仿真和注塑模拟相结合进行研究，使模拟结果更加准确可靠。
The shredding process of steel scrap was simulated through FEM software ANSYS/LS-DYNA based on Nolinear finite element method. The simulating results that steel scrap is shredded are acquired.
利用非线性有限元法，以ANSYS/LS-DYNA为工具，对不同锤头形状、不同锤重、不同锤击速度的回收钢破碎过程进行了计算机数值仿真，得出了回收钢最佳破碎速度的结论。
Equal diameter axis formed in Multi-wedge cross wedge rolling(MCWR)was numerically simulated and analyzed utilizing the finite element method(FEM)software ANSYS/LS-DYNA.
利用有限元软件ANSYS/LS-DYNA，对楔横轧多楔成形等直径轴进行了数值模拟与分析。
To analyze the wires breaking-induced vibrations of long-span power transmission towers, three finite element models of shield wire, conductor wire and tower were established with ANSYS/LS-DYNA.
基于有限元程序ANSYS/LS-DYNA，分别建立以等效弹簧代替塔对线路作用的导线、地线模型和以等效弹簧代替线路对输电塔作用的直线塔模型。
When carry out simulation of shaped charge penetration that based on ANSYS/LS-DYNA, many kinds of material model of the liner can be used, but the difference between them need to be studied.
基于ANSYS/LS-DYNA的聚能装药侵彻仿真时，药型罩材料模型的选择有多种，但仿真结果之间的差别多大，有待研究。
The process of forming and changing of plastic elements is simulated by ANSYS/LS-DYNA solver, and also computes the distributing of element stresses and element strains.
用ANSYS／LS-DYNA求解器动态模拟出铆钉成形过程中塑性单元的变形过程，并计算出铆钉各个单元的应力、应变。
The process of forming and changing of plastic elements is simulated by ANSYS/LS-DYNA solver, and also computes the distributing of element stresses and element strains.
用ANSYS／LS-DYNA求解器动态模拟出铆钉成形过程中塑性单元的变形过程，并计算出铆钉各个单元的应力、应变。
应用推荐