Welding is a complicated process in which arc physics, heat transfer, metallurgy and mechanics are involved.
焊接是一个涉及电弧物理、传热、冶金和力学的复杂过程。
In order to solve Audi car muffler welding problems, a MIG automatic welding process and equipment arc developed which is suitable for the material, structure and joint type of the muffler.
针对奥迪轿车消音器的材料、结构及接头形式，研制了适用于消音器焊接的熔化极气体保护自动焊设备，并对焊接工艺进行了研究。
The process investigation on hybrid YAG - MAG laser arc welding of austenite stainless steel is systematically developed.
针对奥氏体不锈钢材料，系统地开展了YAG-MAG激光电弧复合焊工艺研究。
This welding process joints work pieces by melting the electrode and the base metal with the heat from the electric arc between the electrode and the work piece.
它是一种利用焊条与工件之间电弧产生的热量熔化焊条和母材而将被焊工件连接起来的焊接方法。
This work may be as a useful tool for the understanding of the parameters matching and process optimization in plasma arc welding.
本文的工作对于等离子弧焊接工艺参数的匹配及其过程的优化有重要的指导意义。
From the test results, it is indicated that the controller can not only realize arc stud welding procedure, but also describe the welding process by date acquisition of welding parameter.
试验结果表明，该控制器能在控制实现电弧螺柱焊过程的基础上，通过采集焊接参数客观反映焊接过程的变化。
Through the acquisition of welding currents and voltages during welding, the arc behavior of welding process was analyzed.
对焊接过程的电流及电压波形进行采集，分析焊接过程的电弧行为。
Welding control device adopts microcomputer for process control, arc striking, welding, arc extinguishing control, auto arc voltage control and auto tracking of welding seams.
焊接自动控制装置采用微机实现焊接过程控制，完成引弧、焊接、熄弧控制及弧压自动调节和焊缝自动跟踪。
In this paper the extrusion pressure between the stud and the workpiece during stepping arc stud welding process is acted as the controlled variable so as to control the stud plunge depth.
基于步进式电弧螺柱焊方法，以焊接过程中螺柱与工件之间挤压力为控制量，实现对螺柱送进深度的控制。
This process showed a stable arc, good welding joints without any gas pores and cracks.
焊接过程电弧稳定，焊接接头熔合良好，未见裂纹、 未焊透、夹渣、气孔等缺陷。
Based on the characteristics of MMA welding process, a new control system of IGBT inverter arc welding power source is developed.
针对手工焊条电弧焊(MMA)弧焊过程特点，建立了绝缘栅型晶体管逆变式弧焊电源控制系统。
A mathematical model of fume diffusion in welding process was founded by considering welding arc as a spot source of generating fume and supplying the turbulent diffusion theory.
把焊接电弧作为一个发尘点源，应用大气湍流扩散理论，建立了焊接过程中烟尘扩散的数学模型。
Arc welding process is a very complicated process with many interacting factors mixed together, so the transient state of welding process is related to many parameters.
电弧焊接过程是一个多因素交互作用的复杂过程，焊接过程的状态与许多参数有关。
There is a working procedure of tool tip arc grinding during the laser welding saw blade manufacturing process.
激光焊接锯片生产工艺过程中，有一道刀头磨弧工序。
In this project we have carried out a research on the buried arc automatic welding process for large welded gears with hard tooth surface.
对大型硬齿面焊接齿轮的埋弧自动焊工艺进行了探索和实施。
By using manual arc welding to repair the big kiln circle, the welding process of ZG310-570 super thick cast steel piece was a success, with good running effect observed for more than 5 years.
通过对大窑轮圈采用手工电弧焊的方法进行修复，成功地解决了ZG310- 570铸钢特大厚件的焊接工艺，经过5年多的运行观察，使用效果良好。
The fuzzy control techniques for arc welding power source, seal tracking and arc welding quality is analyzed. The fuzzy logic application methods in arc welding process control is discussed.
分析了焊接电源、焊缝跟踪和焊接质量的模糊控制技术，探讨了模糊逻辑在弧焊过程控制的应用途径。
The paper introduces CO_2 arc process and equipment for welding the connecting hole joints of thin steel column radiators.
介绍了钢制柱型散热器连接孔薄板内孔CO_2自动焊设备及工艺。
By far, research about laser-arc hybrid welding is mostly concentrated on the application and there is still much problem to solve come down to the arc properties and the stability of welding process.
到目前为止，关于激光-电弧复合热源焊接的研究主要集中在应用方面，而涉及到电弧特性及过程稳定性等基础理论，仍有许多问题亟待解决。
Surfacing process test is made on Q235 steel substrate by shielded metal arc welding process using electrode CHR322 at different welding current condition.
前言：采用焊条电弧焊工艺方法，选用C HR322堆焊焊条在Q235钢基体上以不同的焊接电流进行了堆焊试验。
A arc parameter-measuring system was developed to analyze the process of short-circuiting arc welding and the effect of arc energy on the welding stability.
为了分析短路过渡电弧的焊接过程和探讨电弧能量对焊接稳定性的影响，设计了短路过渡电弧电参数检测系统。
Welding process factors consist of welding electric current, electric arc voltage, welding speed, etc.
焊接工艺因素包括焊接电流、电弧电压、焊接速度等。
Because of the difference of arc circuit, the welding process of twin-wire indirect arc gas shielded welding is more stable than single wire welding.
由于电弧回路结构不同，双丝间接电弧气体保护焊的焊接过程比单丝焊更加稳定。
Surfacing process is conducted on the substrate of steel A3 by shielded metal arc welding process using electrode CHR322 under different welding current conditions.
采用堆焊焊条CHR322，在A 3钢基体上以不同的焊接工艺进行手工电弧堆焊试验。
By adopting the automatic submerged arc welding process, the main plunger which surface has been worn out on the heavy duty hydraulic press has been successfully repaired.
用埋弧自动焊方法成功地修复了表面磨损的大型压机主柱塞。
Using low cost charge coupled device (CCD), a vision sensing equipment in welding process was made, and a real time plasma arc welding (PAW) seam tracking system was implemented.
采用低成本电荷耦合器件制作了焊接过程视觉传感器，实现了一种等离子弧焊焊缝实时跟踪系统。
The experiment show that wire extension and arc length can influence the stabilization of welding process and the welding-seam modeling when using fuzzy-expert system .
试验中发现，采用模糊专家控制系统对焊接过程进行闭环控制时，焊丝干伸长及电弧弧长对焊接过程稳定性和焊缝成型有重要影响。
Vibratory submerged arc welding is a new welding process to improve welding quality by applying vibration on plate.
振动埋弧焊工艺是一种在焊接过程中通过给焊件施加振动来改善焊接性能的新工艺。
This paper interprets the short-circuit arc welding process and the process stability. The evaluation methods and criteria for the short-circuit arc welding process are introduced and discussed.
简述了短路电弧焊接的物理过程及过程稳定性概念，介绍了有关短路焊接过程稳定性各种评价方法及相应准则，最后对其进行了必要的讨论。
This paper interprets the short-circuit arc welding process and the process stability. The evaluation methods and criteria for the short-circuit arc welding process are introduced and discussed.
简述了短路电弧焊接的物理过程及过程稳定性概念，介绍了有关短路焊接过程稳定性各种评价方法及相应准则，最后对其进行了必要的讨论。
应用推荐