Master software program, such as c, assemble language, etc.
精通软件编程，如c，汇编语言等。
With assemble language of DSP and C, the software program is written.
应用DSP专用汇编语言与C语言进行系统软件程序的编写；
Using optimized linear assemble language to improve real timing and precision.
为了提高实时性和精确度，采用线性汇编优化实现。
Optimized linear assemble language is used to improve real timing and precision.
为了提高实时性和精确度，采用线性汇编优化实现。
Courses taught: Digital image processing, Assemble language and interface technology, etc.
主讲《数字图像处理》、《汇编与接口技术》等多门课程。精通英语。
For improving the real time performance, all the programs are realized by assemble language.
为了提高该状态监测系统的实时性能，所有程序都是用汇编语言来实现。
The programs of software are written with C language, assemble language and hybrid programming.
软件使用汇编语言、C语言和混合编程等方式。
The authors give the method using TMS320C25 assemble language to implement Messay iteration algorithm.
给出了利用TMS32 0 C2 5汇编语言实现梅西迭代算法的方法。
All algorithms were implemented by MCS-51 assemble language, and they have been applied to the automatic analysis of mercury.
全部算法由MCS - 51汇编语言实现，并已应用于智能测汞仪上。
While measuring the efficiency of programming by using this method, we can get the same efficiency as to use program code of assemble language.
该方法能够做到与汇编语言程序代码等同的效率。
For the software system, we adopt assemble language to deal with datum and control program, so as to realize the on-line and real time control.
软件部分利用汇编语言对算法以及一些控制程序进行编程，实现在线实时控制。
And in the design of software system, Assemble Language is selected for the advantages of simple syntax, high efficiency and strong reliability.
系统的软件部分是利用汇编语言设计，这种方法具有语法简单、执行效率高、可靠高等优点。
As for software, using assemble language of DSP to compile the whole program, including SVPWM module, communication module and protection module.
在软件方面，以SVPWM为核心控制算法，用汇编语言完成了整个控制系统软件的编制，包括保护模块、通讯模块等。
The DSP program is written by using assemble language, which is very concise, takes very limited DSP resources and has a very fast calculating speed.
DSP软件采用汇编语言编写，程序简洁，占用DSP系统资源少，运行速度快。
Software based on assemble language is finished and debugged successfully under the DSP platform of CCS2.0. Experimental results validate system design above.
完成了基于汇编语言的软件设计，在DSP开发平台CCS2.0下完成了软件调试，实验结果证实了提出的方案的有效性，避免了系统振荡。
The SJA1000 initialization program developed by the Assemble Language of TMS320F240, flow diagrams used to initialize, receive and transmit messages are provided.
并给出了用TMS320F 240汇编语言编写的SJA1000初始化程序及接收、发送的数据程序框图。
The software is completed in assemble language. With the growing up of the technology and low cost, the energy system based on super capacitors will be used widely.
随着技术的成熟和成本的降低，超级电容器储能将被广泛应用于电力系统的电能质量控制中。
Assemble Language Program Design is one of the most important basic courses prone to be overlooked in the teaching system of university computer science departments.
《汇编语言程序设计》是高等院校计算机专业教学体系中容易被忽视的一门重要专业基础课程。
Assemble language was used to write second boot loader, and 16-bit parallel asynchronous memory Loading mode was adopted to achieve automatic run after energization.
应用汇编语言编写了二次引导程序，采用16位并行异步存储器加载方式，实现计量单元上电自动运行。
LCD, in place of traditional CRT monitor, is connected with an8-bit MCPU. The program in8K-bytes assemble language can correlate LCD's matrix dot with the data of RAM.
为缩小采用CRT显示器的医疗仪器的体积，我们将LCD与8位微机连接，用8K字节汇编语言设计程序，使LCD的矩阵点与RAM数据相关。
The system is developed in the assemble language; the procedure is programmed with the SLISP software and is concerned with the timing function of MCU and the use of interrupt.
软件方面采用汇编语言编程，使用SLISP软件进行在线的程序烧写，涉及了单片机的定时和中断的使用。
Basing on the well-timed characteristics that the assemble language has when executing. A dynamic diversification chart in rectangular coordinate is designed for display screen.
基于微机原理中汇编语言程序执行的实时性特点，设计了在微机显示器屏幕上画直角坐标系下的动态变化图。
The block diagram of the system software that the soft start-up and the variable parameters PI control is realized with assemble language 80c196 according with sampling period is given out.
同时，给出了以80c 196汇编语言实现的，根据采样周期进行软启动或变参数PI控制的软件程序框图。
The program software compiled by assemble language is used for controlling stepping motor in order to implement the motion laws of various driven objects. Through the experiment, it is dem…
应用汇编语言编制控制步进电机实现多种从动件运动规律的程序软件，并结合实验验证了编制程序的正确性和可行性。
The system's software part includes the Data Acquisition program compiled with c, assemble language and the PC program compiled with a sort of Virtual Instrument programming language-LabVIEW.
PC机程序主要由PC机与单片机通信、数据分析处理和过程监控等子程序组成。
Brief introduction: This course shows the introductions to functional structure, principle, instructions, assemble language programming, interface and application of MCS-51single chip microcomputer.
课程简介：本课程介绍MCS -51单片机的功能结构、工作原理、指令系统、编程技术、接口技术和实际应用。
Brief introduction: This course shows the introductions to functional structure, principle, instructions, assemble language programming, interface and application of MCS-51single chip microcomputer.
课程简介：本课程介绍MCS -51单片机的功能结构、工作原理、指令系统、编程技术、接口技术和实际应用。
应用推荐