The strength, toughness and surface hardness of medium Manganese austenitic steel have been increased greatly by casting surface alloying and complex modification.
通过铸造表面合金化和复合变质处理，使中锰奥氏体钢的强度、韧性和表面硬度显著提高。
Austenitic stainless steel including clad plate shall generally be subjected to cold forming.
奥氏体不锈钢包括包装板通常使用冷成型。
The impact toughness, crack forming energy and crack extension energy of complex modified medium manganese austenitic steel. Are increased by 263%? 288% and 232% respectively.
复合变质中锰奥氏体钢的冲击韧度、裂纹形成功和裂纹扩展功分别比原来提高了263%、288%和232%。
High purity water systems are primarily composed of austenitic stainless steel (ss) materials due to their corrosion resistant and contaminant free properties.
考虑到铬镍不锈钢(SS)的抗腐蚀和防污染性，高纯水系统基本上都是由铬镍不锈钢材料构成。
We shall conduct the clean water for the hydrostatic test of the austenitic stainless steel pipe.
我们将为奥氏体不锈钢管的水压试验引进净水。
The influence of aluminum on the content and morphology of ferrite and toughness of chromium-nickel austenitic stainless steel welds is discussed.
本文研究了铬镍奥氏体焊缝中铝对铁素体含量和形态的影响及其与焊缝韧性的关系。
This paper mainly introduces the stainless steel corrosion, especially the serious accidents caused by the austenitic stainless steel stress corrosion crack.
论文主要介绍了不锈钢的腐蚀尤其对奥氏体不锈钢的应力腐蚀开裂引起的严重事故。
The concept of super austenitic stainless steel appeared with super ferrite stainless steel and super double phases stainless steel together.
超级奥氏体不锈钢的概念是与超级铁素体不锈钢及超级双相不锈钢一起出现的。
The results show that a compound layer with good wear-resistance and corrosion resistance can be gained in 304 austenitic steel by chromizing sbusequent solid soluti…
结果表明，304奥氏体不锈钢经渗铬固溶渗氮复合处理后可获得性能优良的复合渗层，且耐磨、耐腐蚀。
Austenitic stainless steel designates the basic material in Table 1.
奥氏体不锈钢类指表1中所列基本材料。
Austenitic stainless steel seam tubes used to connect the equipments within the reaction zone of a hydrocracking plant imported by the Incorporation are introduced in the paper.
本文介绍在该公司引进的加氢裂化装置反应区内，连接设备用的奥氏体不锈钢有缝管的情况。
The effect of carbon, molybdenum and rare earths on hot cracking susceptibility of austenitic stainless steel welds was studied with continuously variable deformation rate cracking test (VDR) method.
应用变形速率连续可变式热裂纹试验方法(VDR法)研究了碳、钼和稀土元素对奥氏体不锈钢焊缝热裂敏感性的影响。
Mainly used for welding different type of steel and clad steel or similar kind of austenitic steel.
主要用于异种钢或复合钢的焊接或用于焊接相应成分的奥式体钢。
Hot extrusion is the advanced production process for high-performance austenitic stainless steel pipes.
热挤压是优质高性能奥氏体不锈钢管材的先进生产工艺。
The stress corrosion cracking of metastable austenitic stainless steel has been investigated.
研究了亚稳态奥氏体不锈钢的应力腐蚀开裂。
In connection with actual work, the corrosion features and protecting measures for austenitic stainless steel packings during refinery shutdown are introduced.
结合实际工作，介绍了炼油厂停工期间奥氏体不锈钢填料的腐蚀特点和防护措施。
The influences of deformation rate on the mechanical properties of 304 austenitic stainless steel were studied by tensile test at room temperature.
采用室温拉伸实验研究了不同变形速度对304奥氏体不锈钢力学性能的影响规律。
Stress maps of 304 austenitic stainless steel sheets at tensile stresses were measured and analysed by using polycrystalline X-ray two-dimensional area detectors diffraction system.
利用多晶X射线面探测器衍射系统对304奥氏体不锈钢板在拉伸状态下的应力及其分布进行了检测分析。
The steam leakage was occurred on the welding zone of the tube sheet of the austenitic stainless steel heat exchanger.
在奥氏体不锈钢制再沸器的上管板与壳程筒体焊接的管板一侧发生蒸气泄漏。
The surface reaction of water atomized austenitic stainless steel powder during sintering has been studied.
研究了水雾化奥氏体不锈钢粉末在烧结时的表面反应。
Experiments show that the method is not only easy to implement, but also effective for identifying austenitic steel defect.
实验结果表明，此方法简单易行，且能较好地实现奥氏体的缺陷识别。
The surface modification of 316 austenitic stainless steel has been investigated by plasma-based low-energy ion implantation apparatus at various temperatures and working atmospheric pressure.
采用等离子体基低能离子注入装置在不同注入温度、气压条件下氮离子注入316奥氏体不锈钢。
Some corresponding technologies and key points were proposed for the processing difficulties of the thin and long axes of austenitic stainless steel.
针对奥氏体不锈钢细长轴难以加工的特点，提出了对其加工相应的工艺方法及注意事项。
The degradation behavior of an austenitic stainless steel used at high temperatures was studied by the electrochemical method.
利用电化学方法研究了高温中使用的奥氏体不锈钢的高温损伤行为。
In this paper the effect of alloyed modification for carbon content, carbide shape and distribution in austenitic manganese steel has been studied.
研究了合金化变质改性对提高奥氏体锰钢基体碳含量，改变析出碳化物形态及分布的影响。
Thus the development and use of austenitic stainless steel good to me over the words of the industry has become increasingly important.
是以研发和使用好奥氏体不锈钢对我过的工业话来说已经越来越重要了。
Thus the development and use of austenitic stainless steel good to me over the words of the industry has become increasingly important.
是以研发和使用好奥氏体不锈钢对我过的工业话来说已经越来越重要了。
应用推荐