Austenitic stainless steel designates the basic material in Table 1.
奥氏体不锈钢类指表1中所列基本材料。
Austenitic stainless steel including clad plate shall generally be subjected to cold forming.
奥氏体不锈钢包括包装板通常使用冷成型。
The stress corrosion cracking of metastable austenitic stainless steel has been investigated.
研究了亚稳态奥氏体不锈钢的应力腐蚀开裂。
The national standard is not applicable to the detection of austenitic stainless steel castings.
本标准不适用少奥氏体不锈钢铸件的检测。
We shall conduct the clean water for the hydrostatic test of the austenitic stainless steel pipe.
我们将为奥氏体不锈钢管的水压试验引进净水。
Hot extrusion is the advanced production process for high-performance austenitic stainless steel pipes.
热挤压是优质高性能奥氏体不锈钢管材的先进生产工艺。
YUS270 steel is a super austenitic stainless steel produced by Japan and has a perfect pitting resistance.
YUS270钢是由新日本制铁公司开发生产的超奥氏体不锈钢,具有优良的防腐蚀性能。
The surface reaction of water atomized austenitic stainless steel powder during sintering has been studied.
研究了水雾化奥氏体不锈钢粉末在烧结时的表面反应。
These are bolting materials suitable for high temperature service with austenitic stainless steel valve materials.
这些是适用于高温应用环境的奥氏体不锈钢阀门的螺栓材料。
The alteration of substructure of an austenitic stainless steel hasbeen investigated during constant strain fatigue.
本文系统地观察了奥氏体不锈钢在恒应变疲劳过程中组织结构的变化规律。
The steam leakage was occurred on the welding zone of the tube sheet of the austenitic stainless steel heat exchanger.
在奥氏体不锈钢制再沸器的上管板与壳程筒体焊接的管板一侧发生蒸气泄漏。
The degradation behavior of an austenitic stainless steel used at high temperatures was studied by the electrochemical method.
利用电化学方法研究了高温中使用的奥氏体不锈钢的高温损伤行为。
Weldability is one of the important properties that will be affected the application of high nitrogen austenitic stainless steel.
焊接性是影响高氮奥氏体不锈钢(高氮钢)应用的一个重要因素。
Thus the development and use of austenitic stainless steel good to me over the words of the industry has become increasingly important.
是以研发和使用好奥氏体不锈钢对我过的工业话来说已经越来越重要了。
With the help of X-ray diffraction technique, thermal-induced martensite transformation in 304 austenitic stainless steel was investigated.
借助X射线衍射技术,研究了304奥氏体不锈钢热诱发马氏体相变倾向。
The concept of super austenitic stainless steel appeared with super ferrite stainless steel and super double phases stainless steel together.
超级奥氏体不锈钢的概念是与超级铁素体不锈钢及超级双相不锈钢一起出现的。
By analyzing the weldability of beat resistant austenitic stainless steel, the procedures and precautions are proposed for welding the steel.
通过对奥氏体耐热不锈钢的焊接性分析,提出奥氏体耐热不锈钢焊接应采取的焊接工艺及应注意的问题。
Effects of welding parameters on the penetration of austenitic stainless steel A-TIG weld seam with the home-made active flux were carried out.
利用自制的活性剂,考察了焊接工艺参数对奥氏体不锈钢A-TIG焊焊缝熔深的影响。
The safe Angle of nitrogen alloyed austenitic stainless steel is better than high tempered middle carbon steel of HRC33.7 and HRC30.1 in hardness.
含氮奥氏体不锈钢的安全角优于硬度为HRC33.7和HRC30.1的高温回火中碳钢,前者具有较高的抗弹丸倾斜入射的能力。
The influence of aluminum on the content and morphology of ferrite and toughness of chromium-nickel austenitic stainless steel welds is discussed.
本文研究了铬镍奥氏体焊缝中铝对铁素体含量和形态的影响及其与焊缝韧性的关系。
The influences of deformation rate on the mechanical properties of 304 austenitic stainless steel were studied by tensile test at room temperature.
采用室温拉伸实验研究了不同变形速度对304奥氏体不锈钢力学性能的影响规律。
The paper deals with the formation of melting zone in the interface of explosive cladding austenitic stainless steel/normal low alloy steel system .
本文研究了奥氏体不锈钢/普通低合金钢爆焊复合钢板界面熔区的形成。
Some corresponding technologies and key points were proposed for the processing difficulties of the thin and long axes of austenitic stainless steel.
针对奥氏体不锈钢细长轴难以加工的特点,提出了对其加工相应的工艺方法及注意事项。
Based on Yu's "Empirical electron theory of solids and molecules", the mechanism of nitrogen alloying in austenitic stainless steel was investigated.
利用余瑞璜的“固体与分子经验电子理论”从决定合金元素行为的聚合态原子价电子结构出发,研究了奥氏体不锈钢中氮合金化的作用机制。
This paper mainly introduces the stainless steel corrosion, especially the serious accidents caused by the austenitic stainless steel stress corrosion crack.
论文主要介绍了不锈钢的腐蚀尤其对奥氏体不锈钢的应力腐蚀开裂引起的严重事故。
High purity water systems are primarily composed of austenitic stainless steel (ss) materials due to their corrosion resistant and contaminant free properties.
考虑到铬镍不锈钢(SS)的抗腐蚀和防污染性,高纯水系统基本上都是由铬镍不锈钢材料构成。
In connection with actual work, the corrosion features and protecting measures for austenitic stainless steel packings during refinery shutdown are introduced.
结合实际工作,介绍了炼油厂停工期间奥氏体不锈钢填料的腐蚀特点和防护措施。
The micromorphic change of free surface and property of corrosion resistance were observed after austenitic stainless steel was treated by plastic deformation.
对无镍奥氏体不锈钢经塑性变形后自由表面微观形态变化以及对耐腐蚀性能的影响进行了观察分析。
The experimental results show that ultrafine grained austenitic stainless steel can be obtained by the reversal transformation of deformation-induced martensite.
本文研究了热处理对冷加工奥氏体不锈钢组织的影响,试验结果表明利用形变马氏体的逆转变可获得超细化不锈钢晶粒。
The experimental results show that ultrafine grained austenitic stainless steel can be obtained by the reversal transformation of deformation-induced martensite.
本文研究了热处理对冷加工奥氏体不锈钢组织的影响,试验结果表明利用形变马氏体的逆转变可获得超细化不锈钢晶粒。
应用推荐