Under the precondition of incompressible flow, fluid spiral motion in SK static mixer tube was resolved into axial beeline motion and circumferential rotation motion.
在流体不可压缩的假设前提下,将流体在SK型静态混合器中的螺旋形运动分解成轴向直线运动和环向旋转运动。
The parametric resonances and internal resonances of beams with axial force and supporting motion have been investigated.
本文分析了轴向力和支承运动作用下梁的参数共振和内共振问题。
For the coronary arteries, the axial displacement of the motion of vascular wall is important and can not be neglected.
对冠脉来说,管壁运动的轴向位移是重要的,因而是不能忽略的。
For the increase of finishing efficiency and surface quantity, the vibration mechanism was used in finishing machine so as to realize the motion of axial vibration.
为了提高研磨效率与表面质量,在研磨机床中采用振动机构来实现轴向振动运动。
A high speed camera is used to measure the motion characteristics of particles in an axial flow fan.
利用高速摄影技术对轴流风扇内部粒子的运动特性进行了测量。
The research on the large-amplitude vibration suppression of stayed cable under wind excited by controlling support axial motion was carried out in this paper.
主要研究通过对拉索支座的轴向运动进行控制以减小风荷载作用下拉索振动。
The chaotic motion of a nonlinear viscoelastic rigid basic pile subjected to an axial force and a periodic horizontal force was investigated.
研究了在轴向载荷和周期性横向载荷共同作用下非线性粘弹性嵌岩桩的混沌运动情况。
A method for calculating the axial feed of expanding rod is also advanced through the analysis of expander's motion.
文中通过对胀管器的运动分析,导出胀杆的轴向进量计算方法。
The chaotic motion problem for the Longitudinal vibration of a nonlinear viscoelastic pile subjected to an axial periodic force is investigated.
研究了轴向周期载荷作用下非线性粘弹性嵌岩桩纵向振动的混沌运动。
In this paper, the motion model of the cutting head of axial cutting type and radial cutting type is deduced and analyzed, which is helpful for CAD.
推导和分析了横轴式和纵轴式两种切割头运动模型,为切割头CAD设计打下理论基础。
The circular arc gear drive is one kind of axial conjugate gear drive which meshes in points. The movement transmission depends contact mark along the end motion to realize.
圆弧齿轮传动是一种轴向共轭、点啮合制的齿轮传动,运动的传递依靠接触迹沿轴向移动实现。
The transverse chaotic motion problem of a nonlinear viscoelastic rigid basic pile subjected to an axial periodic force is investigated.
研究了轴向周期载荷作用下非线性粘弹性嵌岩桩的横向混沌运动。
The axial movement of materials in the low-speed cylinder is analyzed and the motion formulae are reached in this paper.
本文分析了慢速滚筒内物料的轴向运动,导出了轴向运动的计算公式。
In this paper, the dynamic stability and chaotic motion of a shape memory alloy beam subjected to an axial dynamic load is studied.
研究了受轴向载荷的形状记忆合金梁的动力稳定性与混沌运动。
Axial motion and misalignment (radial and angular offset) between the encoder shaft and the drive shaft are compensated by the coupling.
轴向运动和编码器之间的轴和驱动轴偏差(径向和角向偏移)进行补偿的耦合。
Orbital motion about a point, especially as distinguished from axial rotation.
旋转,绕转:围绕一个点的轨道运动,尤指区别于绕轴旋转的。
The axial deformation method was used to simulate the motion of robot fish in this paper.
采用轴变形方法模拟机器鱼的运动。
Results The range of motion (ROM) of process wire was less than that of the intact in flexion, extension, lateral bending, but not in axial rotation.
结果棘突钢丝在屈伸和侧弯时的运动范围可恢复完整颈椎水平,但旋转时的运动范围比完整颈椎大。
Based on the hydrokinetics and the multiphase flow theory, the paper studied the motion Of sand and water's in the axial flow turbine, silt wear and the feature Of flow.
从流体动力学出发,研究了水轮机过流部件中的沙水运动、包括泥沙磨损机理、流动特性等。
During a physiologic motion, axial disc height patterns at AD and PD affects the spacing and overlapping of articulating PF surfaces.
在生理情况下,AD和PD的轴位高度变化影响后方小关节面之间的间距与堆叠。
Results: The FJ play an important role in load transmission; they provide a posterior load-bearing helper, stabilizing the motion segment in flexion and extension and also restricting axial rotation.
结果:关节突关节在传导脊柱负荷中扮演重要角色,它们对脊柱后侧提供负荷支持,在脊柱屈伸活动中其稳定作用,并能限制脊柱的轴向旋转作用。
The velocity of the Taylor bubble has been experimental studied in different axial position of upward inclined pipe by using high speed motion analyzer.
本文使用高速动态分析仪对低温倾斜上升管内不同位置处弹状汽泡进行了可视化实验研究。
The velocity of the Taylor bubble has been experimental studied in different axial position of upward inclined pipe by using high speed motion analyzer.
本文使用高速动态分析仪对低温倾斜上升管内不同位置处弹状汽泡进行了可视化实验研究。
应用推荐