Axial clearance is bigger, bearing damage easily.
轴向游隙较大时，轴承容易损坏。
According to the movement direction, it falls into radial clearance and axial clearance.
根据移动方向，可分为径向游隙和轴向游隙。
The head coefficient, power coefficient, and efficiency decreased with increasing axial clearance.
随轴向间隙扩大，超小型泵的扬程系数、功率系数和效率都逐渐降低。
This paper presents a new method for detecting the axial clearance of a bearing by a single chip processor 8098.
本文提出使用8098单片机实现轴承轴向间隙检测的新方法。
The axial clearance is the total amount that one ring can be displaced relative to the other in an axial direction.
轴向间隙的总金额，一个环可以流离失所相对于其他的轴线方向。
The presented problems and resulted harm about air seal axial clearance in a centrifugal compressor are pointed out.
指出了离心空压机气封轴向间隙存在的问题及造成的危害。
With tight fits (see pages 105 and 114) the axial clearance is reduced or the preload of the bearing pair increased.
过盈配合情况下（见第105和114页），轴向间隙减小，或者铰副预加负荷增加。
The bearings are generally installed with a small axial clearance in order to compensate for length variations of shaft and housing.
轴承一般设一个小轴向间隙，以弥补轴和轴承座的长度变化。
On the other hand, we should proceed strict detecting including inner and outer diameter, radial and axial clearance to ensure quality.
另一方面是轴承在生产时进行严格的检测，包括内外径、游隙等，以保证质量。
Disk rotation balance week, will go to a certain point of view, the local emergence of the greatest axial clearance or minimum clearance space.
平衡盘转动一周，会在转到某一角度时，局部出现轴向间隙的最大间隙或最小间隙。
The axial clearance is one of the main parameters of the rolling bearing; measured clearance value is closely related to the measuring method and load.
轴向游隙是滚动轴承的关键指标参数之一，测量方法、测量载荷与测得的游隙值的大小密切相关。
The influence of tip clearance on overall performance and detailed flow structure in tip region of an axial compressor rotor was investigated.
研究了顶部间隙对压气机转子总性能及内部流场的影响。
A shaft in the box and a box cover wheel without axial or radial clearance is another factor to move, should refer to a box of round renovation measures.
条轴在条盒轮与条盒盖间无轴向或径向间隙是转动不灵的又一因素，应参照条盒轮的整修办法进行。
Whole model of impeller clearance and labyrinth seal are built up, and the effect of seals with two sides of impeller to axial thrust is considered fully.
建立了叶轮间隙和迷宫密封的整体模型，并充分考虑了叶轮两侧密封对轴向推力的影响。
The study was according to the single parameter on the axial threshing and separating unit test bed, and concave clearance had an effect on its work performance was analyzed.
通过在轴流脱粒与分离装置试验台进行单因素试验，分析了凹板间隙对谷物联合收割机作业性能的影响。
Numerical methods were utilized to investigate the time-dependent flow patterns and the frequency characteristics of unsteady tip clearance flow in an axial-flow low-speed isolated compressor rotor.
利用数值方法研究了某低速轴流孤立压气机转子中非定常叶顶间隙流的流动特征和频率特性。
When bearings radial clearance increase with angular contact ball bearings of the feature, may withstand the big axial loads.
当轴承的径向游隙加大时，具有角接触轴承的功能，可承受较大的轴向负荷。
In this paper the relation between axial and radial clearance and free contact angle are determine through analysing double-row angular-contact ball bearings and double-row spherical roller bearings.
本文引用了法向游隙的概念，对双列向心球面球轴承和双列向心球面滚子轴承的游隙关系和初始接触角作了一些分析，确定了它们之间的相互关系。
With the deepening of the research on axial-flow compressor flow, the nonuniform clearance becomes the problem should be considered.
随着对轴流压气机流动研究的不断深入，叶尖周向非均匀间隙成为了需要考虑的问题。
High clearance co-axial lens and CCD alignment system.
配备高清晰同轴光学镜头和CCD对位系统装置。
This article investigates the nonlinear dynamic characteristics and stability of an axial flow compressor with tip clearance and ball bearings.
研究叶尖气隙和滚动轴承共同作用下轴流压缩机的非线性动力特性及稳定性。
This article investigates the nonlinear dynamic characteristics and stability of an axial flow compressor with tip clearance and ball bearings.
研究叶尖气隙和滚动轴承共同作用下轴流压缩机的非线性动力特性及稳定性。
应用推荐