Barium strontium titanate (BST) ceramic film is prepared on titanium substrate by micro-plasma oxidation.
用微等离子体氧化法在钛金属基体上制备钛酸锶钡(BST)陶瓷膜。
Barium strontium titanate (BST) has been recognized as a ideal material for phase shifters.
钛酸锶钡(BST)材料被普遍认为是最有前途的铁电移相器材料。
The determination of trace silicon in high-purity barium titanate by GFAAS method is studied, in which the sample is dissolved in hydrofluoric acid with high pressure seal.
用石墨炉原子吸收光谱法研究钛酸钡中痕量硅的测定，在高纯钛酸钡新领域的研究及生产中都有重要的现实意义。
Barium titanate is a typical ferroelectric substance.
钛酸钡就是一种典型的位移型铁电体。
Cs-corrected TEM is used to research the polarization in barium titanate. It is guessed that the polarization is mainly influenced by the thickness of the sample.
利用球差校正电镜研究了钛酸钡的极化，猜测极化大小主要受样品厚度的影响。
Barium vacancy existed in grain boundary is responsible for the PTCR effect observed in donor doped barium titanate ceramics.
施主掺杂的钛酸钡陶瓷的PT CR效应来源于晶界上的钡空位。
Such, the studies on preparation of barium titanate powder and ceramics have been widely carried out nowadays.
钛酸钡粉体和陶瓷的制备，及其性能优化的研究成为当下的热点。
Liquid method is preferable in preparing barium strontium titanate powders with high performance.
法是制备性能良好的钛酸锶钡粉体的有效方法。
Complex impendence techniques are used to analyze the humidity sensing mechanism of nanometer barium titanate humidity sensors on silicon substrate.
用复阻抗法对硅衬底纳米钛酸钡湿敏元件的感湿机理进行了分析讨论。
The removal efficiency of the reactor packed with barium titanate was much higher than that without barium titanate. The highest removal efficiency of benzene was 92.6% and that of toluene was 96.8%.
在较高电场强度下，有钛酸钡填料的反应器比无填料的反应器对苯和甲苯的去除率高得多，苯最高去除率可达92 6%，甲苯可达到96 8%。
ABSTRACT Barium titanate semiconductive ceramics are the electronics materials used most widely and researched most deeply in functional ceramics.
钛酸钡半导体陶瓷是功能陶瓷中应用最广泛和研究得比较透彻的电子材料。
Common ceramic elements are barium titanate and lead zirconate - titanate.
普通的陶瓷元件分别是钛酸钡和锆钛酸铅。
The preparation and doping method influences the electrical properties of barium titanate strongly.
钛酸钡粉体的制备方法及掺杂方式对陶瓷的电学性质有很大影响。
In reducing atmosphere, part V5 + can go into the lattice of barium titanate and act as an acceptor dopant by neutralizing free electron.
在还原气氛烧成的条件下，部分V 5 +可以进入钛酸钡晶格，起到受主掺杂的功效。
The cold-pressing ceramic processing technique was used to prepare high-permittivity Barium Titanate ceramics.
采用冷压陶瓷处理技术制备了高介电率钛酸钡陶瓷材料。
The cold-pressing ceramic processing technique was used in this research to prepare Barium Titanate ceramic disk.
本研究应用冷压陶瓷处理技术制备了钛酸钡陶瓷片材料。
Barium titanate ceramics have been the focus because of the excellent properties, and been applied in many fields.
钛酸钡陶瓷因为其优异的性能应用广泛，被国内外广泛关注。
The conductive adhesive is prepared by polymer matrix, barium titanate ceramic powder, diluent, curing agent and silane coupling agent.
本发明的导电胶由聚合物基体、钛酸钡陶瓷粉、稀释剂、固化剂和硅烷偶联剂制成。
ABSTRACT Barium titanate semiconductive ceramics are the electronics materials used most widely and researched most deeply in functional ce...
钛酸钡半导体陶瓷是功能陶瓷中应用最广泛和研究得比较透彻的电子材料。
Barium titanate (BaTiO3) is a well-known ferroelectric material with high dielectric constant and low losses above room temperature, and it is extensively used in the electric industry.
钛酸钡具有高介电常数、低的介质损耗等优异的性能，广泛地应用于电子工业中。
Common ceramic elements are barium titanate and lead zirconate-titanate.
普通的陶瓷元件分别是钛酸钡和锆钛酸铅。
The dielectric properties of ferroelectric materials such as barium titanate are upgraded by sintering the dry pressed shapes in a vacuum having partial air pressures of 1 to 1000 microns.
在空气分压为1至1000微米汞柱的真空度下进行烧结干压成型，可以提高钛酸钡等铁电材料的介电性能。
In a high level with barium titanate, the small amount by addition of carbonyl iron resulted in the sharp rise on dielectric loss.
在钛酸钡含量较高时，少量羰基铁粉的加入就造成了介电损耗的急剧上升。
In a high level with barium titanate, the small amount by addition of carbonyl iron resulted in the sharp rise on dielectric loss.
在钛酸钡含量较高时，少量羰基铁粉的加入就造成了介电损耗的急剧上升。
应用推荐