It used bevel gears to transmit power to the prop.
它使用的锥齿轮转交权力交给道具。
The teeth on bevel gears can be straight, spiral or hypoid.
锥齿轮的齿可以是直齿、螺旋形或准双曲面。
Bevel gears: gears which connect two shafts at right angles.
伞齿轮：连接直角相交两轴的齿轮。
The normal arc spiral bevel gears is a new type of transmission pair.
法向圆弧螺旋锥齿轮传动是一种新的锥齿轮传动形式。
Bevel gears can be mounted at standard, 90, 180 or 270 degree mounting.
锥齿轮可以采用标准位置，90度、180度或270度位置安装。
But in actual applications, spiral bevel gears on RIGS are often damaged.
但在实际应用中，钻机中弧齿圆锥齿轮常损坏。
And in the case of bevel gears, the rotational axes are not parallel to each other.
在斜齿轮情况下，并且，旋转的轴不是互相平行的。
Helical bevel gears have an infinite life, and are 50% more efficient than single worm gears.
螺旋锥齿轮有无限的使用寿命，而且比单蜗轮齿轮要高出50%以上的效率。
Going into the gearbox, universal joints connect the centre drive shaft to the internal bevel gears.
进入变速箱，万向节连接中心传动轴到内部锥齿轮。
Handwheels, Chainwheels, Bevel Gears, Levers, Pneumatic and Hydraulic Cylinders and electric motors.
手轮，链轮，锥齿轮，杠杆，气动和液动缸体，电动。
The "Tool Pan Tilted method" is a high effect method to generate spiral-bevel gears and Hypoid gears.
刀倾半展成法是加工螺旋锥齿轮和准双曲面齿轮的有效方法。
Being an important part in aero-engine, the spiral bevel gears were frequently destroyed from syntony.
弧齿锥齿轮是航空发动机中的基本元件，常发生共振破坏。
This paper provides reference for later research and application of double-circular-arc spiral bevel gears.
论文工作为今后双圆弧弧齿锥齿轮的进一步研究及推广应用提供了参考依据。
They keep their technique secret and others hardly acquire the machining technology about spiral bevel gears.
这些公司对外均进行技术保密，外界很难获得螺旋锥齿轮的加工技术。
This paper USES the local synthesis method to determine machine tool Settings for grinding spiral bevel gears.
采用局部综合法进行弧齿锥齿轮磨齿加工参数(包括刀具参数和机床调整参数)设计。
Vibration and traveling wave stress analysis of rotating bevel gears is performed using annular finite element.
提供了一种使用半解析环形棱柱有限元求解盘形锥齿轮行波振动的方法。
The machine tool is suitable for helical bevel gears production in single piece and also for maintainence work.
该机床是螺旋锥齿轮单件生产和设备维修的较理想设备。
A contrast experiment for the spiral bevel gears was carried out on a rotor test facility with elastic supports.
在转子系统模拟试验台上，对发动机主传动锥齿轮接触性能进行了实验研究。
The dynamic characteristics of Gleason spiral bevel gears are computed with MCSAP program modified and implanted.
应用修改移植的微机MCSAP程序，计算了弧齿锥齿轮的动态特性。
Spiral bevel gears are usually used to improve the bearing capacity of the Angle transmission gears on drill RIGS.
在钻机里常采用弧齿圆锥齿轮提高角传动齿轮承载能力。
It is demonstrated that the meshing line between two meshing epicycloidal bevel gears is a curve of uniparted hyperboloid.
证明了摆线齿锥齿轮副的啮合线是单叶双曲面上的一条曲线。
The meshing contact-impact and contact performance of spiral bevel gears has a strong impact on the whole machine performance.
螺旋锥齿轮的啮合接触冲击特性和动态接触性能的好坏严重影响其整机的工作性能。
A unified model was established for spur cylindrical gears, helical cylindrical gears, spur bevel gears and helical bevel gears.
建立了直齿圆柱齿轮、齿圆柱齿轮、齿圆锥齿轮、齿圆锥齿轮的统一模型。
GEARMASTER PGP oils are used in high-load industrial gear systems such as spur gears, bevel gears, epicyclical gears and worm gear pairs.
油都用在高负荷工业齿轮系统，如直齿圆柱齿轮，锥齿轮，行星齿轮和蜗轮副。
It is a burring equipment of machining gears, be the same with the tooth parts of spur gears, helical gears, bevel gears, chain wheel and so on.
齿轮倒棱机是对齿轮加工过程中形成的毛刺进行处理的设备。适用于加工各种直齿、斜齿、伞齿、链轮等齿形零件。
With this database system, the running speed of the spiral bevel gears' CAD system will be higher and the results of design will be more accurate.
利用该数据库系统，将使弧齿锥齿轮CAD系统的运行速度更加迅速、设计结果更加准确。
Therefore, the variability of axle deflections and their effects on the dynamic performance in the dynamic meshing of spiral bevel gears was studied.
因此，本文还研究了动态啮合过程中轴变形的变化规律，及其对螺旋锥齿轮动态啮合性能的影响。
Using this method in spiral bevel gears' setting, the noise could be reduced, the vibration be decreased and the precision of transmission be ensured.
采用该方法对弧齿锥齿轮进行装配和调试，降低了噪声，减小了震动，保证了传动精度。
Using this method in spiral bevel gears' setting, the noise could be reduced, the vibration be decreased and the precision of transmission be ensured.
采用该方法对弧齿锥齿轮进行装配和调试，降低了噪声，减小了震动，保证了传动精度。
应用推荐