Five strand billet caster at Xining Special Steel Group Co.
对西钢新建生产线五机五流小方坯连铸机改造进行了综述。
The improvement of immersion nozzle in square billet caster is introduced, the result extinguished.
介绍了邯钢方坯连铸机浸入式水口的改进，保护浇注效果显著。
Here is an introduction in detail, together with analysis, to the hydraulic control system for the main components of billet caster.
比较详细分析介绍了方坯连铸机各主要机构的液压控制系统。
This paper introduces the technological characteristics of billet caster of Xining Special Steel and the ways to make the caster high efficient.
介绍西宁特钢连铸机的技术特性及其高效化的工艺实践。
The process optimization for No. 3 Billet Caster at Converter Plant which improves the production stability and strand quality has been introduced.
介绍转炉炼钢厂优化3号方坯连铸机的生产工艺，使生产稳定性提高，铸坯质量得到改善。
The quality check mode of No. 4 billet caster has been introduced, and the innovative approaches for problems existing in the check have been put forward.
介绍了4号方坯连铸机铸坯质量检验的模式，并对检验过程中存在问题提出改进措施。
This paper introduces the operating process and control system of the secondary cooling water of the new billet caster in No. 3 steelmaking plant of Magang.
介绍了马钢第三炼钢厂新建方坯连铸机二冷水系统的工艺过程及其控制与特点。
For high-efficiency casting and variety development, silica insulation plate was replaced by basic dry lining material in the working layer of billet caster tundish.
为适应高效连铸和开发新品种的需要，邯钢第三炼钢厂方坯连铸中间包工作层用碱性干式自流料取代了硅质绝热板。
This paper introduces the application of dry magnesia-calcia coating and quick nozzle change technology in tundish of No. 1 billet caster at No. 2 Steel making Plant of Angang.
介绍安钢二炼钢厂在1号方坯连铸机中间罐上应用镁钙质干式涂料及快速更换水口技术的情况，快换水口系统原理及取得的效果。
The water modeling of five - strand billet caster tundish was carried out. The result has showed the appropriate shape of flow control devices in tundish is feasible to improve flow pattern of fluid.
报导了五流方坯连铸中间罐内流体流动状态的水力学模拟试验研究，其试验结果表明：在该中间罐内设置适当的控流装置形式对改善中间罐内流体的流动模式是可行的。
This article expounds the crux of the mold taper and then deduces the taper engineering formula of the mold for the horizontal continuous caster to cast round billet.
本文阐明了结晶器锥度的实质，进而导出了水平连铸圆坯用结晶锥度的设计公式。
The high-efficiency reform of rectangular billet continuous caster of Xuanhua Iron and Steel Company is introduced, that can be used as reference for other continuous casters.
介绍了宣钢炼钢厂矩形坯连铸机的高效化改造，可供矩形坯、板坯连铸机高效化改造参考。
The hydraulic shear for square stainless steel billet designed by our company for caster is introduced, its type selection, structure and shear stress calculation are analyzed.
介绍了邢台机械轧辊（集团）有限公司设计的连铸机用不锈钢矩形坯液压平剪，对该液压剪的选型、剪力计算进行了分析。
This paper gave some remarks to the design and operational parameters of billet continuous caster mould.
本文对连铸小方坯结晶器的设计和操作参数作了一些说明。
The reasons of continuous caster leaking are analyzed aiming to the problem of high leaking rate after reforming the small billet cast to improve its efficiency.
针对小方坯连铸高效化改造后拉漏率高的问题 ，分析了造成漏钢的原因 ，介绍了所采取的对策及取得的效果。
The high carbon grade billet cast with continuous caster was influenced by billet inclusion, clogging of the nozzle etc.
连铸优质硬线钢小方坯时，铸坯夹渣、水口堵塞等问题影响质量和生产。
The calculated shell thick is basically identical with that of real billet. Thus the calculated results can be used as references for the production and design of continuous caster.
计算出的坯壳厚度与实测的坯壳厚度基本吻合，计算结果可为连铸机生产和连铸机设计提供参考。
The calculated shell thick is basically identical with that of real billet. Thus the calculated results can be used as references for the production and design of continuous caster.
计算出的坯壳厚度与实测的坯壳厚度基本吻合，计算结果可为连铸机生产和连铸机设计提供参考。
应用推荐